The symbol TIMER_MAX used in imx_epit.c and imx_gpt.c
clashes with system symbol with the same name.  Because
all qemu source files includes qemu-common.h which, in
turn, includes limits.h, which is not unusual to define
it.  Rename local symbol to have a reasonable prefix.
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

* remotes/mdroth/qga-pull-2014-08-08:
  qga: Disable unsupported commands by default
  qga: Add guest-get-fsinfo command
  qga: Add guest-fsfreeze-freeze-list command
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Currently management softwares cannot know whether a qemu-ga command is
supported or not on the running platform until they actually execute it.
This patch disables unsupported commands at launch time of qemu-ga, so that
management softwares can check whether they are supported from 'enabled'
property of the result from 'guest-info' command.
Signed-off-by: NTomoki Sekiyama <tomoki.sekiyama@hds.com>
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

Add command to get mounted filesystems information in the guest.
The returned value contains a list of mountpoint paths and
corresponding disks info such as disk bus type, drive address,
and the disk controllers' PCI addresses, so that management layer
such as libvirt can resolve the disk backends.

For example, when `lsblk' result is:

    NAME           MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
    sdb              8:16   0    1G  0 disk
    `-sdb1           8:17   0 1024M  0 part
      `-vg0-lv0    253:1    0  1.4G  0 lvm  /mnt/test
    sdc              8:32   0    1G  0 disk
    `-sdc1           8:33   0  512M  0 part
      `-vg0-lv0    253:1    0  1.4G  0 lvm  /mnt/test
    vda            252:0    0   25G  0 disk
    `-vda1         252:1    0   25G  0 part /

where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1,
      sdc is an IDE disk with PCI controller 0000:00:01.1, and
      vda is a virtio-blk disk with PCI device 0000:00:06.0,

guest-get-fsinfo command will return the following result:

    {"return":
     [{"name":"dm-1",
       "mountpoint":"/mnt/test",
       "disk":[
        {"bus-type":"scsi","bus":0,"unit":1,"target":0,
         "pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}},
        {"bus-type":"ide","bus":0,"unit":0,"target":0,
         "pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}],
       "type":"xfs"},
      {"name":"vda1", "mountpoint":"/",
       "disk":[
        {"bus-type":"virtio","bus":0,"unit":0,"target":0,
         "pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}],
       "type":"ext4"}]}

In Linux guest, the disk information is resolved from sysfs. So far,
it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86
hosts, and "disk" parameter may be empty for unsupported disk types.
Signed-off-by: NTomoki Sekiyama <tomoki.sekiyama@hds.com>

*updated schema to report 2.2 as initial supported version
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

If an array of mount point paths is specified as 'mountpoints' argument
of guest-fsfreeze-freeze-list, qemu-ga will only freeze the file systems
mounted on specified paths in Linux guests. Otherwise, it works as the
same way as guest-fsfreeze-freeze.
This would be useful when the host wants to create partial disk snapshots.
Signed-off-by: NTomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

*updated schema to report 2.2 as initial supported version
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>

KVM changes include a MIPS patch and the testdev backend used by the
ARM kvm-unit-tests.  icount include the first part of reverse execution
and Sebastian Tanase's patches to slow down -icount execution to the
desired speed of the target.

v1->v2: fix dump_drift_info to print nothing outside icount mode,
        and to compile on 32-bit architectures

# gpg: Signature made Thu 07 Aug 2014 14:09:58 BST using RSA key ID 9B4D86F2
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg:                 aka "Paolo Bonzini <bonzini@gnu.org>"

* remotes/bonzini/tags/for-upstream:
  target-mips: Ignore unassigned accesses with KVM
  monitor: Add drift info to 'info jit'
  cpu-exec: Print to console if the guest is late
  cpu-exec: Add sleeping algorithm
  icount: Add align option to icount
  icount: Add QemuOpts for icount
  icount: Fix virtual clock start value on ARM
  timer: add cpu_icount_to_ns function.
  migration: migrate icount fields.
  icount: put icount variables into TimerState.
  backends: Introduce chr-testdev
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

MIPS registers an unassigned access handler which raises a guest bus
error exception. However this causes QEMU to crash when KVM is enabled
as it isn't called from the main execution loop so longjmp() gets called
without a corresponding setjmp().

Until the KVM API can be updated to trigger a guest exception in
response to an MMIO exit, prevent the bus error exception being raised
from mips_cpu_unassigned_access() if KVM is enabled.

The check is at run time since the do_unassigned_access callback is
initialised before it is known whether KVM will be enabled.

The problem can be triggered with Malta emulation by making the guest
write to the reset region at physical address 0x1bf00000, since it is
marked read-only which is treated as unassigned for writes.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Cc: Sanjay Lal <sanjayl@kymasys.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Show in 'info jit' the current delay between the host clock
and the guest clock. In addition, print the maximum advance
and delay of the guest compared to the host.
Signed-off-by: NSebastian Tanase <sebastian.tanase@openwide.fr>
Tested-by: NCamille Bégué <camille.begue@openwide.fr>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

VFIO patches: Fix MSI-X vector expansion, remove MSI/X message caching

# gpg: Signature made Tue 05 Aug 2014 20:25:57 BST using RSA key ID 3BB08B22
# gpg: Can't check signature: public key not found

* remotes/awilliam/tags/vfio-pci-for-qemu-20140805.0:
  vfio: Don't cache MSIMessage
  vfio: Fix MSI-X vector expansion
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

If the align option is enabled, we print to the user whenever
the guest clock is behind the host clock in order for he/she
to have a hint about the actual performance. The maximum
print interval is 2s and we limit the number of messages to 100.
If desired, this can be changed in cpu-exec.c
Signed-off-by: NSebastian Tanase <sebastian.tanase@openwide.fr>
Tested-by: NCamille Bégué <camille.begue@openwide.fr>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The goal is to sleep qemu whenever the guest clock
is in advance compared to the host clock (we use
the monotonic clocks). The amount of time to sleep
is calculated in the execution loop in cpu_exec.

At first, we tried to approximate at each for loop the real time elapsed
while searching for a TB (generating or retrieving from cache) and
executing it. We would then approximate the virtual time corresponding
to the number of virtual instructions executed. The difference between
these 2 values would allow us to know if the guest is in advance or delayed.
However, the function used for measuring the real time
(qemu_clock_get_ns(QEMU_CLOCK_REALTIME)) proved to be very expensive.
We had an added overhead of 13% of the total run time.

Therefore, we modified the algorithm and only take into account the
difference between the 2 clocks at the begining of the cpu_exec function.
During the for loop we try to reduce the advance of the guest only by
computing the virtual time elapsed and sleeping if necessary. The overhead
is thus reduced to 3%. Even though this method still has a noticeable
overhead, it no longer is a bottleneck in trying to achieve a better
guest frequency for which the guest clock is faster than the host one.

As for the the alignement of the 2 clocks, with the first algorithm
the guest clock was oscillating between -1 and 1ms compared to the host clock.
Using the second algorithm we notice that the guest is 5ms behind the host, which
is still acceptable for our use case.

The tests where conducted using fio and stress. The host machine in an i5 CPU at
3.10GHz running Debian Jessie (kernel 3.12). The guest machine is an arm versatile-pb
built with buildroot.

Currently, on our test machine, the lowest icount we can achieve that is suitable for
aligning the 2 clocks is 6. However, we observe that the IO tests (using fio) are
slower than the cpu tests (using stress).
Signed-off-by: NSebastian Tanase <sebastian.tanase@openwide.fr>
Tested-by: NCamille Bégué <camille.begue@openwide.fr>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The align option is used for activating the align algorithm
in order to synchronise the host clock and the guest clock.
Signed-off-by: NSebastian Tanase <sebastian.tanase@openwide.fr>
Tested-by: NCamille Bégué <camille.begue@openwide.fr>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Make icount parameter use QemuOpts style options in order
to easily add other suboptions.
Signed-off-by: NSebastian Tanase <sebastian.tanase@openwide.fr>
Tested-by: NCamille Bégué <camille.begue@openwide.fr>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When using the icount option on ARM, the virtual
clock starts counting at realtime clock but it
should start at 0.

The reason why the virtual clock starts at realtime clock
is because the first time we call qemu_clock_warp (which
calls icount_warp_rt) in tcg_exec_all, qemu_icount_bias
(which is part of the virtual time computation mechanism)
will increment by realtime - vm_clock_warp_start, with
vm_clock_warp_start being 0 (see icount_warp_rt in cpus.c).

By changing the value of vm_clock_warp_start from 0 to -1,
the first time we call qemu_clock_warp which calls
icount_warp_rt, we will return immediatly because
icount_warp_rt first checks if vm_clock_warp_start is -1
and if it's the case it returns. Therefore, qemu_icount_bias
will first be incremented by the value of a virtual timer
deadline when the virtual cpu goes from active to inactive.

The virtual time will start at 0 and increment based
on the instruction counter when the vcpu is active or
the qemu_icount_bias value when inactive.
Signed-off-by: NSebastian Tanase <sebastian.tanase@openwide.fr>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This adds cpu_icount_to_ns function which is needed for reverse execution.

It returns the time for a specific instruction.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This fixes a bug where qemu_icount and qemu_icount_bias are not migrated.
It adds a subsection "timer/icount" to vmstate_timers so icount is migrated only
when needed.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: NAmit Shah <amit.shah@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This puts qemu_icount and qemu_icount_bias into TimerState structure to allow
them to be migrated.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

From: Paolo Bonzini <pbonzini@redhat.com>

chr-testdev enables a virtio serial channel to be used for guest
initiated qemu exits. hw/misc/debugexit already enables guest
initiated qemu exits, but only for PC targets. chr-testdev supports
any virtio-capable target. kvm-unit-tests/arm is already making use
of this backend.

Currently there is a single command implemented, "q".  It takes a
(prefix) argument for the exit code, thus an exit is implemented by
writing, e.g. "1q", to the virtio-serial port.

It can be used as:
   $QEMU ... \
     -device virtio-serial-device \
     -device virtserialport,chardev=ctd -chardev testdev,id=ctd

or, use:
   $QEMU ... \
     -device virtio-serial-device \
     -device virtconsole,chardev=ctd -chardev testdev,id=ctd

to bind it to virtio-serial port0.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndrew Jones <drjones@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Commit 40509f7f added a test to avoid updating KVM MSI routes when the
MSIMessage is unchanged and f4d45d47 switched to relying on this
rather than doing our own comparison.  Our cached msg is effectively
unused now.  Remove it.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

When new MSI-X vectors are enabled we need to disable MSI-X and
re-enable it with the correct number of vectors.  That means we need
to reprogram the eventfd triggers for each vector.  Prior to f4d45d47
vector->use tracked whether a vector was masked or unmasked and we
could always pick the KVM path when available for unmasked vectors.
Now vfio doesn't track mask state itself and vector->use and virq
remains configured even for masked vectors.  Therefore we need to ask
the MSI-X code whether a vector is masked in order to select the
correct signaling path.  As noted in the comment, MSI relies on
hardware to handle masking.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Cc: qemu-stable@nongnu.org # QEMU 2.1

target-arm queue:
 * Set PC correctly when loading AArch64 ELF files
 * sdhci: Fix ADMA dma_memory_read access
 * some more foundational work for EL2/EL3 support
 * fix bugs which reveal themselves if the TARGET_PAGE_SIZE
   is not set to 1K

# gpg: Signature made Mon 04 Aug 2014 14:51:34 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"

* remotes/pmaydell/tags/pull-target-arm-20140804:
  target-arm: A64: fix TLB flush instructions
  target-arm: don't hardcode mask values in arm_cpu_handle_mmu_fault
  target-arm: Fix bit test in sp_el0_access
  target-arm: Add FAR_EL2 and 3
  target-arm: Add ESR_EL2 and 3
  target-arm: Make far_el1 an array
  target-arm: A64: Respect SPSEL when taking exceptions
  target-arm: A64: Respect SPSEL in ERET SP restore
  target-arm: A64: Break out aarch64_save/restore_sp
  sd: sdhci: Fix ADMA dma_memory_read access
  hw/arm/virt: formatting: memory map
  hw/arm/boot: Set PC correctly when loading AArch64 ELF files
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

According to the ARM ARM we weren't correctly flushing the TLB entries
where bits 63:56 didn't match bit 55 of the virtual address. This
exposed a problem when we switched QEMU's internal TARGET_PAGE_BITS to
12 for aarch64.
Signed-off-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1406733627-24255-3-git-send-email-alex.bennee@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Otherwise we break quickly when we change TARGET_PAGE_SIZE.
Signed-off-by: NAlex Bennée <alex.bennee@linaro.org>
Message-id: 1406733627-24255-2-git-send-email-alex.bennee@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Static code analyzers complain about a dubious & operation used for a
boolean value. The code does not test the PSTATE_SP bit as it should.

Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Message-id: 1406359601-25583-1-git-send-email-sw@weilnetz.de
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Reviewed-by: NGreg Bellows <greg.bellows@linaro.org>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Message-id: 1402994746-8328-7-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Reviewed-by: NGreg Bellows <greg.bellows@linaro.org>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Message-id: 1402994746-8328-6-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

No functional change.
Prepares for future additions of the EL2 and 3 versions of this reg.
Reviewed-by: NGreg Bellows <greg.bellows@linaro.org>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Message-id: 1402994746-8328-5-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NGreg Bellows <greg.bellows@linaro.org>
Message-id: 1402994746-8328-4-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NGreg Bellows <greg.bellows@linaro.org>
Message-id: 1402994746-8328-3-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Break out code to save/restore AArch64 SP into functions.
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: NGreg Bellows <greg.bellows@linaro.org>
Message-id: 1402994746-8328-2-git-send-email-edgar.iglesias@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This dma_memory_read was giving too big a size when begin was non-zero.
This could cause segfaults in some circumstances. Fix.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add some spacing and zeros to make it easier to read and
modify the map. This patch has no functional changes. The
review looks ugly, but it's actually pretty easy to confirm
all the addresses are as they should be - thanks to the new
formatting ;-)
Signed-off-by: NAndrew Jones <drjones@redhat.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The code in do_cpu_reset() correctly handled AArch64 CPUs
when running Linux kernels, but was missing code in the
branch of the if() that deals with loading ELF files.
Correctly jump to the ELF entry point on reset rather than
leaving the reset PC at zero.
Reported-by: NChristopher Covington <cov@codeaurora.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Tested-by: NChristopher Covington <cov@codeaurora.org>
Cc: qemu-stable@nongnu.org

* remotes/amit-migration/for-2.2:
  checker: ignore fields marked unused
  vmstate static checker: whitelist additions
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

* remotes/amit-virtio-rng/for-2.2:
  virtio-rng: replace error_set calls with error_setg
  virtio-rng: Move error-checking forward to prevent memory leak
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

* remotes/sstabellini/xen-20140801:
  qemu: support xen hvm direct kernel boot
  tap-bsd: implement a FreeBSD only version of tap_open
  xen: fix usage of ENODATA
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

While comparing qemu-1.0 json output with qemu-2.1, a few fields got
marked unused.  These need to be skipped over, and not flagged as
mismatches.

For handling unused fields, the exact number of bytes need to be skipped
over as the size of the unused field.

Currently, only the term "unused" is matched.  When more field names
turn up, this will have to be updated based on the whitelist matching
method to match more such terms.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>

Under recommendation from Luiz Capitulino, we are changing
the error_set calls to error_setg while we are fixing up
the error handling pathways of virtio-rng.
Signed-off-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NAmit Shah <amit.shah@redhat.com>

This patch pushes the error-checking forward and the virtio
initialization backward in the device realization function
in order to prevent memory leaks for hot plug scenarios.
Signed-off-by: NJohn Snow <jsnow@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NAmit Shah <amit.shah@redhat.com>

Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>