When draining intermediate nodes (i.e. nodes that aren't the root node
for at least one of their parents; with node references, the user can
always configure the graph to create this situation), we need to
propagate the .drained_begin/end callbacks all the way up to the root
for the drain to be effective.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NFam Zheng <famz@redhat.com>

When changing the BlockDriverState that a BdrvChild points to while the
node is currently drained, we must call the .drained_end() parent
callback. Conversely, when this means attaching a new node that is
already drained, we need to call .drained_begin().

bdrv_root_attach_child() takes now an opaque parameter, which is needed
because the callbacks must also be called if we're attaching a new child
to the BlockBackend when the root node is already drained, and they need
a way to identify the BlockBackend. Previously, child->opaque was set
too late and the callbacks would still see it as NULL.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NFam Zheng <famz@redhat.com>

Until now, bdrv_drained_begin() used bdrv_drain() internally to drain
the queue. This is kind of backwards and caused quiescing code to be
duplicated because bdrv_drained_begin() had to ensure that no new
requests come in even after bdrv_drain() returns, whereas bdrv_drain()
had to have them because it could be called from other places.

Instead move the bdrv_drain() code to bdrv_drained_begin() and make
bdrv_drain() a simple wrapper around bdrv_drained_begin/end().
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NFam Zheng <famz@redhat.com>

This adds a common function that is called when attaching a new child to
a parent, removing a child from a parent and when reconfiguring the
graph so that an existing child points to a different node now.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NFam Zheng <famz@redhat.com>

blk_new() cannot fail so its Error ** parameter has become superfluous.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

bdrv_close() now asserts that the BDS's refcount is 0, therefore it
cannot have any parents and the bdrv_parent_cb_change_media() call is a
no-op.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The only caller of bdrv_close() left is bdrv_delete(). We may as well
assert that, in a way (there are some things in bdrv_close() that make
more sense under that assumption, such as the call to
bdrv_release_all_dirty_bitmaps() which in turn assumes that no frozen
bitmaps are attached to the BDS).

In addition, being called only in bdrv_delete() means that we can drop
bdrv_close()'s forward declaration at the top of block.c.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NAlberto Garcia <berto@igalia.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

There are no callers to bdrv_open() or bdrv_open_inherit() left that
pass a pointer to a non-NULL BDS pointer as the first argument of these
functions, so we can finally drop that parameter and just make them
return the new BDS.

Generally, the following pattern is applied:

    bs = NULL;
    ret = bdrv_open(&bs, ..., &local_err);
    if (ret < 0) {
        error_propagate(errp, local_err);
        ...
    }

by

    bs = bdrv_open(..., errp);
    if (!bs) {
        ret = -EINVAL;
        ...
    }

Of course, there are only a few instances where the pattern is really
pure.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

It is unused now, so we may just as well drop it.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NAlberto Garcia <berto@igalia.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Its only caller is blk_new_open(), so we can just inline it there.

The bdrv_new_root() call is dropped in the process because we can just
let bdrv_open() create the BDS.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Now that throttling has been moved to the BlockBackend level, we do not
need to create a BDS along with the BB in the I/O throttling test.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

If bdrv_open_inherit() creates a snapshot BDS and *pbs is NULL, that
snapshot BDS should be returned instead of the BDS under it.

This has worked so far because (nearly) all users of BDRV_O_SNAPSHOT use
blk_new_open() to create the BDS tree. bdrv_append() (which is called by
bdrv_append_temp_snapshot()) redirects pointers from parents (i.e. the
BB in this case) to the newly appended child (i.e. the overlay),
therefore, while bdrv_open_inherit() did not return the root BDS, the BB
still pointed to it.

The only instance where BDRV_O_SNAPSHOT is used but blk_new_open() is
not is in blockdev_init() if no BDS tree is created, and instead
blk_new() is used and the flags are stored in the BB root state.
However, qmp_blockdev_change_medium() filters the BDRV_O_SNAPSHOT flag
before invoking bdrv_open(), so it will not have any effect.

In any case, it would be nicer if bdrv_open_inherit() could just always
return the root of the BDS tree that has been created.

To this end, bdrv_append_temp_snapshot() now returns the snapshot BDS
instead of just appending it on top of the snapshotted BDS. Also, it
calls bdrv_ref() before bdrv_append() (which bdrv_open_inherit() has to
undo if not returning the overlay).
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

bdrv_append_temp_snapshot() uses bdrv_new() to create an empty BDS
before invoking bdrv_open() on that BDS. This is probably a relict from
when it used to do some modifications on that empty BDS, but now that is
unnecessary, so we can just set bs_snapshot to NULL and let bdrv_open()
do the rest.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NAlberto Garcia <berto@igalia.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The bdrv_next() users all leaked the BdrvNextIterator after completing
the iteration. Simply changing bdrv_next() to free the iterator before
returning NULL at the end of list doesn't work because some callers exit
the loop before looking at all BDSes.

This patch moves the BdrvNextIterator from the heap to the stack of
the caller and switches to a bdrv_first()/bdrv_next() interface for
initialising the iterator.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NFam Zheng <famz@redhat.com>

X86 queue, 2016-05-23

# gpg: Signature made Mon 23 May 2016 23:48:27 BST using RSA key ID 984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"

* remotes/ehabkost/tags/x86-pull-request:
  target-i386: kvm: Eliminate kvm_msr_entry_set()
  target-i386: kvm: Simplify MSR setting functions
  target-i386: kvm: Simplify MSR array construction
  target-i386: kvm: Increase MSR_BUF_SIZE
  target-i386: kvm: Allocate kvm_msrs struct once per VCPU
  target-i386: Call cpu_exec_init() on realize
  target-i386: Move TCG initialization to realize time
  target-i386: Move TCG initialization check to tcg_x86_init()
  cpu: Eliminate cpudef_init(), cpudef_setup()
  target-i386: Set constant model_id for qemu64/qemu32/athlon
  pc: Set CPU model-id on compat_props for pc <= 2.4
  osdep: Move default qemu_hw_version() value to a macro
  target-i386: kvm: Use X86XSaveArea struct for xsave save/load
  target-i386: Use xsave structs for ext_save_area
  target-i386: Define structs for layout of xsave area
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

migration fixes:

- ensure src block devices continue fine after a failed migration
- fail on migration blockers; helps 9p savevm/loadvm
- move autoconverge commands out of experimental state
- move the migration-specific qjson in migration/

# gpg: Signature made Mon 23 May 2016 18:15:09 BST using RSA key ID 657EF670
# gpg: Good signature from "Amit Shah <amit@amitshah.net>"
# gpg:                 aka "Amit Shah <amit@kernel.org>"
# gpg:                 aka "Amit Shah <amitshah@gmx.net>"

* remotes/amit-migration/tags/migration-2.7-1:
  migration: regain control of images when migration fails to complete
  savevm: fail if migration blockers are present
  migration: Promote improved autoconverge commands out of experimental state
  migration/qjson: Drop gratuitous use of QOM
  migration: Move qjson.[ch] to migration/
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

rng: rename RndRandom to RndRandom

# gpg: Signature made Mon 23 May 2016 16:44:58 BST using RSA key ID 657EF670
# gpg: Good signature from "Amit Shah <amit@amitshah.net>"
# gpg:                 aka "Amit Shah <amit@kernel.org>"
# gpg:                 aka "Amit Shah <amitshah@gmx.net>"

* remotes/amit-virtio-rng/tags/rng-2.7-1:
  rng-random: rename RndRandom to RngRandom
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

opencores_eth cleanups:
- use mii.h
- reduce stack usage in open_eth_start_xmit.

# gpg: Signature made Mon 23 May 2016 20:14:20 BST using RSA key ID F83FA044
# gpg: Good signature from "Max Filippov <max.filippov@cogentembedded.com>"
# gpg:                 aka "Max Filippov <jcmvbkbc@gmail.com>"

* remotes/xtensa/tags/20160523-opencores_eth:
  hw/net/opencores_eth: Allocating Large sized arrays to heap
  hw/net/opencores_eth: use mii.h
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Inline the function inside kvm_msr_entry_add().
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

Simplify kvm_put_tscdeadline_msr() and
kvm_put_msr_feature_control() using kvm_msr_buf and the
kvm_msr_entry_add() helper.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

Add a helper function that appends new entries to the MSR buffer
and checks for the buffer size limit.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

We are dangerously close to the array limits in kvm_put_msrs()
and kvm_get_msrs(): with the default mcg_cap configuration, we
can set up to 148 MSRs in kvm_put_msrs(), and if we allow mcg_cap
to be changed, we can write up to 236 MSRs.

Use 4096 bytes for the buffer, that can hold 255 kvm_msr_entry
structs.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

Instead of using 2400 bytes in the stack for 150 MSR entries in
kvm_get_msrs() and kvm_put_msrs(), allocate a buffer once for
each VCPU.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

QOM instance_init functions are not supposed to have any side-effects,
as new objects may be created at any moment for querying property
information (see qmp_device_list_properties()).

Calling cpu_exec_init() also affects QEMU's ability to handle errors
during CPU creation, as some actions done by cpu_exec_init() can't be
reverted.

Move cpu_exec_init() call to realize so a simple object_new() won't
trigger it, and so that it is called after some basic validation of CPU
parameters.
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

QOM instance_init functions are not supposed to have any side-effects,
as new objects may be created at any moment for querying property
information (see qmp_device_list_properties()).

Move TCG initialization to realize time so it won't be called when just
doing object_new() on a X86CPU subclass.
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

Instead of requiring cpu.c to check if TCG was already initialized,
simply let the function be called multiple times.
Suggested-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

x86_cpudef_init() doesn't do anything anymore, cpudef_init(),
cpudef_setup(), and x86_cpudef_init() can be finally removed.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

Newer PC machines don't set hw_version, and older machines set
model-id on compat_props explicitly, so we don't need the
x86_cpudef_setup() code that sets model_id using
qemu_hw_version() anymore.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

open_eth_start_xmit has a huge stack usage of 65536 bytes approx.
Moving large arrays to heap to reduce stack usage.

Reduce size of a buffer allocated on stack to 0x600 bytes, which is the
maximal frame length when HUGEN bit is not set in MODER, only allocate
buffer on heap when that is too small. Thus heap is not used in typical
use case.
Signed-off-by: NZhou Jie <zhoujie2011@cn.fujitsu.com>
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>

Drop local definitions of MII registers and use constants from mii.h for
registers and register bits. No functional changes.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>

We currently have an error path during migration that can cause
the source QEMU to abort:

migration_thread()
  migration_completion()
    runstate_is_running() ----------------> true if guest is running
    bdrv_inactivate_all() ----------------> inactivate images
    qemu_savevm_state_complete_precopy()
     ... qemu_fflush()
           socket_writev_buffer() --------> error because destination fails
         qemu_fflush() -------------------> set error on migration stream
  migration_completion() -----------------> set migrate state to FAILED
migration_thread() -----------------------> break migration loop
  vm_start() -----------------------------> restart guest with inactive
                                            images

and you get:

qemu-system-ppc64: socket_writev_buffer: Got err=104 for (32768/18446744073709551615)
qemu-system-ppc64: /home/greg/Work/qemu/qemu-master/block/io.c:1342:bdrv_co_do_pwritev: Assertion `!(bs->open_flags & 0x0800)' failed.
Aborted (core dumped)

If we try postcopy with a similar scenario, we also get the writev error
message but QEMU leaves the guest paused because entered_postcopy is true.

We could possibly do the same with precopy and leave the guest paused.
But since the historical default for migration errors is to restart the
source, this patch adds a call to bdrv_invalidate_cache_all() instead.
Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Message-Id: <146357896785.6003.11983081732454362715.stgit@bahia.huguette.org>
Signed-off-by: NAmit Shah <amit.shah@redhat.com>

Instead of relying on x86_cpudef_setup() calling
qemu_hw_version(), just make old machines set model-id explicitly
on compat_props for qemu64, qemu32, and athlon. This will allow
us to eliminate x86_cpudef_setup() later.
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

The macro will be used by code that will stop calling
qemu_hw_version() at runtime and just need a constant value.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

Instead of using offset macros and bit operations in a uint32_t
array, use the X86XSaveArea struct to perform the loading/saving
operations in kvm_put_xsave() and kvm_get_xsave().
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

This doesn't introduce any change in the code, as the offsets and
struct sizes match what was present in the table. This can be
validated by the QEMU_BUILD_BUG_ON lines on target-i386/cpu.h,
which ensures the struct sizes and offsets match the existing
values in ext_save_area.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

Add structs that define the layout of the xsave areas used by
Intel processors. Add some QEMU_BUILD_BUG_ON lines to ensure the
structs match the XSAVE_* macros in target-i386/kvm.c and the
offsets and sizes at target-i386/cpu.c:ext_save_areas.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

QEMU has currently two ways to prevent migration to occur:
- migration blocker when it depends on runtime state
- VMStateDescription.unmigratable when migration is not supported at all

This patch gathers all the logic into a single function to be called from
both the savevm and the migrate paths.

This fixes a bug with 9p, at least, where savevm would succeed and the
following would happen in the guest after loadvm:

$ ls /host
ls: cannot access /host: Protocol error

With this patch:

(qemu) savevm foo
Migration is disabled when VirtFS export path '/' is mounted in the guest
using mount_tag 'host'
Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-Id: <146239057139.11271.9011797645454781543.stgit@bahia.huguette.org>

[Update subject according to Paolo's suggestion - Amit]
Signed-off-by: NAmit Shah <amit.shah@redhat.com>

* NMI cleanups (Bandan)
* RAMBlock/Memory cleanups and fixes (Dominik, Gonglei, Fam, me)
* first part of linuxboot support for fw_cfg DMA (Richard)
* IOAPIC fix (Peter Xu)
* iSCSI SG_IO fix (Vadim)
* Various infrastructure bug fixes (Zhijian, Peter M., Stefan)
* CVE fixes (Prasad)

# gpg: Signature made Mon 23 May 2016 16:06:18 BST using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"

* remotes/bonzini/tags/for-upstream: (24 commits)
  cpus: call the core nmi injection function
  nmi: remove x86 specific nmi handling
  target-i386: add a generic x86 nmi handler
  coccinelle: add g_assert_cmp* to macro file
  iscsi: pass SCSI status back for SG_IO
  esp: check dma length before reading scsi command(CVE-2016-4441)
  esp: check command buffer length before write(CVE-2016-4439)
  scripts/signrom.py: Check for magic in option ROMs.
  scripts/signrom.py: Allow option ROM checksum script to write the size header.
  Remove config-devices.mak on 'make clean'
  cpus.c: Use pthread_sigmask() rather than sigprocmask()
  memory: remove unnecessary masking of MemoryRegion ram_addr
  memory: Drop FlatRange.romd_mode
  memory: Remove code for mr->may_overlap
  exec: adjust rcu_read_lock requirement
  memory: drop find_ram_block()
  vl: change runstate only if new state is different from current state
  ioapic: clear remote irr bit for edge-triggered interrupts
  ioapic: keep RO bits for IOAPIC entry
  target-i386: key sfence availability on CPUID_SSE, not CPUID_SSE2
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

We can call the common function here directly since
x86 specific actions will be taken care of by the arch
specific nmi handler
Signed-off-by: NBandan Das <bsd@redhat.com>
Message-Id: <1463761717-26558-4-git-send-email-bsd@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

nmi_monitor_handle is wired to call the x86 nmi
handler. So, we can directly use it at call sites.
Signed-off-by: NBandan Das <bsd@redhat.com>
Message-Id: <1463761717-26558-3-git-send-email-bsd@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>