Signed-off-by: NEvgeny Voevodin <e.voevodin@samsung.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NEvgeny Voevodin <e.voevodin@samsung.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NEvgeny Voevodin <e.voevodin@samsung.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NEvgeny Voevodin <e.voevodin@samsung.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NEvgeny Voevodin <e.voevodin@samsung.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NEvgeny Voevodin <e.voevodin@samsung.com>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This function was only introduced in glib 2.28.0.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This allows you to specify:

  $ qemu -device virtio-rng-pci

And things will Just Work with a reasonable default.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This adds parameters to virtio-rng-pci to allow rate limiting the entropy a
guest receives.  An example command line:

$ qemu -device virtio-rng-pci,max-bytes=1024,period=1000

Would limit entropy collection to 1Kb/s.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The Linux kernel already has a virtio-rng driver, this is the device
implementation.

When the guest asks for entropy from the virtio hwrng, it puts a buffer
in the vq.  We then put entropy into that buffer, and push it back to
the guest.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
---
aliguori: converted to new RngBackend interface
aliguori: remove entropy needed event
aliguori: fix migration

This backend talks EGD to a CharDriverState.  A typical way to invoke this would
be:

qemu -chardev socket,host=localhost,port=1024,id=chr0 \
     -object rng-egd,chardev=chr0,id=egd0 \
     -device virtio-rng-pci,rng=egd0
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The filename can be overridden but it expects a non-blocking source of entropy.
A typical invocation would be:

qemu -object rng-random,id=rng0 -device virtio-rng-pci,rng=rng0

This can also be used with /dev/urandom by using the command line:

qemu -object rng-random,filename=/dev/urandom,id=rng0 \
     -device virtio-rng-pci,rng=rng0
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
---
v1 -> v2
 - merged header split patch into this one
v2 -> v3
 - bug fix in rng-random (Paolo)

This is the backend used by devices that need to request entropy.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
---
v1 -> v2
 - Fix whitespace (Andreas Faerber)

This will create a new QOM object in the '/objects' path.  Note that properties
are set in order which allows for simple objects to be initialized entirely
with this option and then realized.

This option is roughly equivalent to -device but for things that are not
devices.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

While reading microMIPS decoding, I found a possible wrong opcode
encoding. According to [1] page 166, the bits 13..12 for MULTU is
0x01 rather than 0x00. Please review, thanks.

[1] MIPS Architecture for Programmers VolumeIV-e: The MIPS DSP
    Application-Specific Extension to the microMIPS32 Architecture
Signed-off-by: NChen Wei-Ren <chenwj@iis.sinica.edu.tw>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

According to the MIPS Malta Developement Platform User's Manual, the
i8259 interrupt controller is supposed to be connected to the hardware
IRQ0, and the CBUS UART to the hardware interrupt 2.

In QEMU they are both connected to hardware interrupt 0, the CBUS UART
interrupt being wrong. This patch fixes that. It should be noted that
the irq array in QEMU includes the software interrupts, hence
env->irq[2] is the first hardware interrupt.

Cc: Ralf Baechle <ralf@linux-mips.org>
Reviewed-by: NEric Johnson <ericj@mips.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

vfio-pci: KVM INTx accel & common msi_get_message

* awilliam/tags/vfio-pci-for-qemu-1.3.0-rc0:
  vfio-pci: Use common msi_get_message
  vfio-pci: Add KVM INTx acceleration
  linux-headers: Update to 3.7-rc5
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* kraxel/pixman.v5:
  pixman: cleanup properly on make distclean
  pixman: add licensing info
  pixman: build internal version early
  pixman: pass cflags, add -fPIC
  pixman: disable gtk
  pixman: set --host for cross builds
  pixman: add output dir to include path
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* bonzini/nbd-next:
  nbd: fixes to read-only handling
  hmp: add NBD server commands
  nbd: disallow nbd-server-add before nbd-server-start
  nbd: force read-only export for read-only devices
  nbd: fix nbd_server_stop crash when no server was running
  nbd: accept URIs
  nbd: accept relative path to Unix socket
  qemu-nbd: initialize main loop before block layer
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* bonzini/scsi-next:
  virtio-scsi: use dma_context_memory
  dma: Define dma_context_memory and use in sysbus-ohci
  megasas: Correct target/lun mapping
  scsi-disk: flush cache after disabling it
  megasas: do not include block_int.h
  scsi: remove superfluous call to scsi_device_set_ua
  virtio-scsi: factor checks for VIRTIO_SCSI_S_DRIVER_OK when reporting events
  scsi: do not return short responses for emulated commands
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* kraxel/usb.70:
  ehci: fix migration
  xhci: Fix some DMA host endian bugs
  usb/combined-packet: Move freeing of combined to usb_combined_packet_remove()
  xhci: Add support for packets with both data and an error status
  ehci: Add support for packets with both data and an error status
  ehci: Get rid of the magical PROC_ERR status
  usb-redir: Allow packets to have both data and an error-status
  usb: split packet result into actual_length + status
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* spice/spice.v63:
  spice: fix initialization order
  pflib: unused, remove it.
  spice: switch to pixman
  qxl: call dpy_gfx_resize when entering vga mode
  qxl: fix cursor reset
  hw/qxl: qxl_send_events: nop if stopped
  hw/qxl: guest bug on primary create with stride %4 != 0
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NEric Johnson <ericj@mips.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Pass on CFLAGS to the pixman configure script.
Add -fPIC to the cflags, needed to make the final link succeed.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

gtk is only needed to build test cases.
Disable it to simplify the build.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Set --host when calling pixman configure while doing cross builds so
pixman's autoconf picks up the cross build tools correctly.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Needed to make sure the (generated) pixman-version.h file is found.
Based on a patch from Blue Swirl.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

We can get rid of our local version now that a helper exists.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

This makes use of the new level irqfd support enabling bypass of qemu
userspace both on INTx injection and unmask.  This significantly
boosts the performance of devices making use of legacy interrupts (ex.
~60% better netperf TCP_RR scores for an e1000e assigned to a Linux
guest and booted with pci=nomsi).  This also avoids flipping mmaps on
and off to simulate EOIs, so greatly improves performance of device
access in addition to interrupt latency.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

update-linux-headers.sh script run against Linux tag v3.7-rc5
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

We do not need BLKROSET if the kernel supports setting flags.
Also, always do BLKROSET even for a read-write export, otherwise
the read-only state remains "sticky" after the invocation of
"qemu-nbd -r".
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Commit ed2aec4867f0d5f5de496bb765347b5d0cfe113d changed the return
value of aio_ctx_prepare from false to true when only idle bottom
halves are available.  This broke PC old-style DMA, which uses them.
Fix this by making aio_ctx_prepare return true only when non-idle
bottom halves are scheduled to run.
Reported-by: Nmalc <av1474@comtv.ru>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Nmalc <av1474@comtv.ru>

Until address_space_rw was introduced, NULL was accepted as a
placeholder for DMA with no IOMMU (to address_space_memory).

This does not work anymore, and dma_context_memory needs to
be specified explicitly.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Define a new global dma_context_memory which is a DMAContext corresponding
to the global address_space_memory AddressSpace. This can be used by
sysbus peripherals like sysbus-ohci which need to do DMA.

In particular, use it in the sysbus-ohci device, which fixes a
segfault when attempting to use that device.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>

The structure to reference a logical drive has an unused field,
which can be used to carry the lun ID. This enabled seabios to
establish the proper target/LUN mapping.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

SBC says that "if an application client changes the WCE bit from one to
zero via a MODE SELECT command, then the device server shall write
any data in volatile cache to non-volatile medium before completing
the command".
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>