This fixes a possible endianness issue in the usb-ohci hw module.
hcca.frame and ohci->frame_number are 16bit, so use cpu_to_le16().
Signed-off-by: NMichael Buesch <mb@bu3sch.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Fixes build on 32-bit
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

qemu-io leaks the request buffer whenever the read or write function isn't
executed completely down the "normal" code path.

[hch: also fix the aio and vectored variants the same way]
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Add a -g flag to the open command and the main qemu-io command line to
allow opening a file growable.  This is only allowed for protocols,
mirroring the limitation exposed through bdrv_file_open.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>

Fix up a couple of issues with validating the input of the various
length arguments for the vectored I/O commands:

 - do the alignment check on each length instead the always 0 count argument
 - use a long long varibale for the cvtnum return value so that we can check
   wether it wasn't a number
 - check for a too large argument instead of truncating it

Also refactor it into a common helper for all four calers and avoid parsing
the numbers twice.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>

Address a couple of review comments from Kevin.
Signed-off-by: NChristoph Hellwig <hch@lst.de>

 -no-kqemu -> -enable-kqemu

kqemu is still present at compile time by default
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

with.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Set the Linux process name to the name argument specified with name. I find
this useful to see which guests are taking CPU time in top.

This doesn't affect ps, which checks argv[0], but rewriting the
environment uses much more code, so I only used this simple way.

v2: Use separate process= argument, no prefixes.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

In order to allow overriding flags that are set by configure, we have to
append them instead of prepending as it is done so far.

v2: Clarify documentation.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

control vector is saved/restored by virtio-pci,
it does not belong in virtio.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This fixes segfault reported by Kevin Wolf,
and simplifies the code in msix_save.
Reported-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Otherwise if you hot remove an eepro100 NIC and then migrate,
you get:

  Unknown savevm section or instance 'eeprom' 0

on the destination side.
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

destroy_nic() requires that NICInfo::private by a PCIDevice pointer,
but then goes on to require that the same pointer matches
VLANClientState::opaque.

That is no longer the case for virtio-net since qdev and wasn't
previously the case for rtl8139, ne2k_pci or eepro100.

Make the situation a lot more clear by maintaining a VLANClientState
pointer in NICInfo.
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

If no tap,sndbuf= arg is supplied, we use a default value. If
TUNSETSNDBUF fails in this case, we should not abort.
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJohn Arbuckle <programmingkidx@gmail.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

":readahead=###:" suffix.

Signed-off-by: Nolan Leake <nolan <at> sigbus.net>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

In order to not execute code we just compiled, let's replace signrom
with a shell script that does the same thing while staying compatible
to pretty much every system available.

This should make cross-compilation for windows easier.

aliguori: fix build when objdir != srcdir
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This reverts commit 707c0dbc.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The performance of qcow2 has improved meanwhile, so we don't need to
special-case it any more. Switch the default to write-through caching
like all other block drivers.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

On reflection, perhaps it does make sense to set a default value for
the sndbuf= tap parameter.

For best effect, sndbuf= should be set to just below the capacity of
the physical NIC.

Setting it higher will cause packets to be dropped before the limit
is hit. Setting it much lower will not cause any problems unless
you set it low enough such that the guest cannot queue up new packets
before the NIC has emptied its queue.

In Linux, txqueuelen=1000 by default for ethernet NICs. Given a 1500
byte MTU, 1Mb is a good choice for sndbuf.

If it turns out that txqueuelen is actually much lower than this, then
sndbuf is essentially disabled. In the event that txqueuelen is much
higher, it's unlikely that the NIC will be able to empty a 1Mb queue.

Thanks to Herbert Xu for this logic.
Signed-off-by: NMark McLoughlin <markmc@redhat.com>
Cc: Herbert Xu <herbert.xu@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Attached patch lets configure find xen headers and xen libs
when called with --extra-cflags and --extra-ldflags options.
Signed-off-by: NChristoph Egger <Christoph.Egger@amd.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

- MCE features are initialized when VCPU is intialized according to CPUID.
- A monitor command "mce" is added to inject a MCE.
- A new interrupt mask: CPU_INTERRUPT_MCE is added to inject the MCE.

aliguori: fix build for linux-user
Signed-off-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Add explicit padding to MIPS signal frame structures.
Signed-off-by: NPaul Brook <paul@codesourcery.com>

Enable NPTL support for MIPS usermode emulation.
Signed-off-by: NPaul Brook <paul@codesourcery.com>

Implement MIPS ll/sc instructions using atomic compare+exchange.
Signed-off-by: NPaul Brook <paul@codesourcery.com>

Implement cpu_set_tls for MIPS.
Signed-off-by: NPaul Brook <paul@codesourcery.com>

The clone syscall takes 6 args.
Signed-off-by: NPaul Brook <paul@codesourcery.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

* fix secondary bus setup.
 * use base->name instead of "FIXME" for device name.
   Yes, the device name is redundant.  Only for drivers converted
   to qdev already though.  Once all drivers are converted we can
   and should kill it.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

The only purpose DeviceType serves is creating a linked list of
DeviceInfo structs.  This removes DeviceType and add a next field to
DeviceInfo instead, so the DeviceInfo structs can be changed that way.
Elimitates a pointless extra level of indirection.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

BusInfo is filled with name and size (pretty much like I did for
DeviceInfo as well).  There is also a function pointer to print
bus-specific device information to the monitor.  sysbus is hooked
up there, I've also added a print function for PCI.

Device creation is slightly modified as well:  The device type search
loop now also checks the bus type while scanning the list instead of
complaining thereafter in case of a mismatch.  This effectively gives
each bus a private namespace for device names.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NPaul Brook <paul@codesourcery.com>

Makes pci_qdev_register take a PCIDeviceInfo struct instead of a bunch
of parameters.  Also adds config_read and config_write callbacks to
PCIDeviceInfo, so drivers needing these can be converted to the qdev
device API too.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>