Added the hmp command to query local apic registers state, may be
usefull after guest crashes to understand IRQ routing in guest.

(qemu) info lapic
dumping local APIC state for CPU 0

LVT0    0x00010700 active-hi edge  masked                      ExtINT (vec 0)
LVT1    0x00000400 active-hi edge                              NMI
LVTPC   0x00010000 active-hi edge  masked                      Fixed  (vec 0)
LVTERR  0x000000fe active-hi edge                              Fixed  (vec 254)
LVTTHMR 0x00010000 active-hi edge  masked                      Fixed  (vec 0)
LVTT    0x000000ef active-hi edge                 one-shot     Fixed  (vec 239)
Timer   DCR=0x3 (divide by 16) initial_count = 61360
SPIV    0x000001ff APIC enabled, focus=off, spurious vec 255
ICR     0x000000fd physical edge de-assert no-shorthand
ICR2    0x00000001 cpu 1 (X2APIC ID)
ESR     0x00000000
ISR     (none)
IRR     239

APR 0x00 TPR 0x00 DFR 0x0f LDR 0x00 PPR 0x00
Signed-off-by: NPavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Andreas Färber <afaerber@suse.de>
Message-Id: <1442927901-1084-7-git-send-email-den@openvz.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

monitor_fprintf and mon_get_cpu will be used in the target-specific monitor,
so it is advisable to make it external.
Signed-off-by: NPavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Andreas Färber <afaerber@suse.de>
Message-Id: <1442927901-1084-6-git-send-email-den@openvz.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Fix formatting of local apic definitions and drop unused constant
APIC_INPUT_POLARITY, APIC_SEND_PENDING. Magic numbers in shifts are
replaced with constants defined just above.
Signed-off-by: NPavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Andreas Färber <afaerber@suse.de>
Message-Id: <1442927901-1084-5-git-send-email-den@openvz.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

These constants are needed for optimal access to
bit fields local apic registers without magic numbers.
Signed-off-by: NPavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Andreas Färber <afaerber@suse.de>
Message-Id: <1442927901-1084-4-git-send-email-den@openvz.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Added prefix APIC_ for determining the constant of a particular subsystem,
improve the overall readability and match other constant names.
Signed-off-by: NPavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Andreas Färber <afaerber@suse.de>
Message-Id: <1442927901-1084-3-git-send-email-den@openvz.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Move apic_get_bit(), apic_set_bit() to apic_internal.h, make the apic_get_ppr
symbol external. It's necessary to work with isr, tmr, irr and ppr outside
hw/intc/apic.c
Signed-off-by: NPavel Butsykin <pbutsykin@virtuozzo.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Andreas Färber <afaerber@suse.de>
Message-Id: <1442927901-1084-2-git-send-email-den@openvz.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The arbitration register should read to the same value as the
IOAPIC id register.  Fixes kvm-unit-tests ioapic.flat.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

If a level-triggered interrupt goes down and back up before the
corresponding EOI, it should be coalesced.  This fixes one testcase
in kvm-unit-tests' ioapic.flat.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Only "Odd Fixes" status, but let's add a point of contact.

Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Only "Odd Fixes" status, but let's add a point of contact.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Reviewed-by: NAlberto Garcia <berto@igalia.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Cc: Alexander Graf <agraf@suse.de>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

PPC32 and PPC64 were unified.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

"Match a single C-language char (octet) even if that is part of a larger
UTF-8 character.  Thus it breaks up characters into their UTF-8 bytes,
so you may end up with malformed pieces of UTF-8."

Just use a period instead.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Replace ad-hoc declarations with the linux header.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1442585920-28373-1-git-send-email-marcandre.lureau@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Steve Ellcey / Leon Alrae reported that QEMU fails to build when
the VPATH directory is outside of the GIT tree, and the system
emulators & tools build is disabled. eg

   cd ..
   mkdir build
   cd build
   ../qemu/configure --disable-system --disable-tools
   make
   (...)
   make[1]: *** No rule to make target `../qom/object.o', needed by `qemu-aarch64'. Stop.
   make: *** [subdir-aarch64-linux-user] Error 2

The problem is due to the fact that some sub directory deps
were listed against SOFTMMU_SUBDIR_RULES instead of SUBDIR_RULES,
so were only processed for system emulators, not user emalutors.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Message-Id: <1442570495-22029-1-git-send-email-berrange@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Passed-through SCSI devices can be opened with the readonly=on option.
When this happens, Linux filters away write commands so that the guest
cannot overwrite the contents of the device.

However, the guest does not know that the device is read-only, and
accepts writes.  The writes only fail later when the page cache is
flushed.

This patch modifies scsi-generic to modify the MODE SENSE data and
set the read-only bit in the device-specific parameters, so that
the guest OS treats the disk as write protected.
Reviewed-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

If anything it should recommend strtok_r!
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

While reading the function I decided to write some tests.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1442419377-9309-2-git-send-email-marcandre.lureau@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Not only it makes sense, but it gets rid of checkpatch warning:
WARNING: consider using qemu_strtosz in preference to strtosz

Also remove get rid of tabs to please checkpatch.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1442419377-9309-1-git-send-email-marcandre.lureau@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The qemu-nbd program currently uses a QemuOpts objects
when setting up sockets. Switch it over to use the
QAPI SocketAddress objects instead.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Message-Id: <1442411543-28513-3-git-send-email-berrange@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The nbd block driver currently uses a QemuOpts object
when setting up sockets. Switch it over to use the
QAPI SocketAddress object instead.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Message-Id: <1442411543-28513-2-git-send-email-berrange@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

wxx patch queue

# gpg: Signature made Thu 24 Sep 2015 20:24:50 BST using RSA key ID 677450AD
# gpg: Good signature from "Stefan Weil <sw@weilnetz.de>"
# gpg:                 aka "Stefan Weil <stefan.weil@weilnetz.de>"
# gpg:                 aka "Stefan Weil <stefan.weil@bib.uni-mannheim.de>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 4923 6FEA 75C9 5D69 8EC2  B78A E08C 21D5 6774 50AD

* remotes/weil/tags/pull-wxx-20150924:
  oslib-win32: only provide localtime_r/gmtime_r if missing
  gtk: avoid redefining _WIN32_WINNT macro
  qemu-thread: add a fast path to the Win32 QemuEvent
  slirp: Fix non blocking connect for w32
  nsis: Add QEMU version information to Windows registry
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The oslib-win32 file currently provides a localtime_r and
gmtime_r replacement unconditionally. Some versions of
Mingw-w64 would provide crude macros for localtime_r/gmtime_r
which QEMU takes care to disable. Latest versions of Mingw-w64
now provide actual functions for localtime_r/gmtime_r, but
with a twist that you have to include unistd.h or pthread.h
before including time.h.  By luck some files in QEMU have
such an include order, resulting in compile errors:

  CC    util/osdep.o
In file included from include/qemu-common.h:48:0,
                 from util/osdep.c:48:
include/sysemu/os-win32.h:77:12: error: redundant redeclaration of 'gmtime_r' [-Werror=redundant-decls]
 struct tm *gmtime_r(const time_t *timep, struct tm *result);
            ^
In file included from include/qemu-common.h:35:0,
                 from util/osdep.c:48:
/usr/i686-w64-mingw32/sys-root/mingw/include/time.h:272:107: note: previous definition of 'gmtime_r' was here
In file included from include/qemu-common.h:48:0,
                 from util/osdep.c:48:
include/sysemu/os-win32.h:79:12: error: redundant redeclaration of 'localtime_r' [-Werror=redundant-decls]
 struct tm *localtime_r(const time_t *timep, struct tm *result);
            ^
In file included from include/qemu-common.h:35:0,
                 from util/osdep.c:48:
/usr/i686-w64-mingw32/sys-root/mingw/include/time.h:269:107: note: previous definition of 'localtime_r' was here

This change adds a configure test to see if localtime_r
exits, and only enables the QEMU impl if missing. We also
re-arrange qemu-common.h try attempt to guarantee that all
source files get unistd.h before time.h and thus see the
localtime_r/gmtime_r defs.

[sw: Use "official" spellings for Mingw-w64, MinGW in comments.]
[sw: Terminate sentences with a dot in comments.]
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Reviewed-by: NDenis V. Lunev <den@openvz.org>
Signed-off-by: NStefan Weil <sw@weilnetz.de>

When building for Mingw64 target on Fedora 22 a warning
is issued about _WIN32_WINNT being redefined.

In file included from ui/gtk.c:40:0:
include/ui/gtk.h:5:0: warning: "_WIN32_WINNT" redefined
 # define _WIN32_WINNT 0x0601 /* needed to get definition of MAPVK_VK_TO_VSC */
  ^
In file included from /usr/i686-w64-mingw32/sys-root/mingw/include/crtdefs.h:10:0,
                 from /usr/i686-w64-mingw32/sys-root/mingw/include/stdio.h:9,
                 from /home/berrange/src/virt/qemu/include/qemu/fprintf-fn.h:12,
                 from /home/berrange/src/virt/qemu/include/qemu-common.h:18,
                 from ui/gtk.c:37:
/usr/i686-w64-mingw32/sys-root/mingw/include/_mingw.h:225:0: note: this is the location of the previous definition
 #define _WIN32_WINNT 0x502
 ^

Rather than try to get MAPVK_VK_TO_VSC defined indirectly
by defining _WIN32_WINNT, instead just define it explicitly
if missing.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>

QemuEvents are used heavily by call_rcu.  We do not want them to be slow,
but the current implementation does a kernel call on every invocation
of qemu_event_* and won't cut it.

So, wrap a Win32 manual-reset event with a fast userspace path.  The
states and transitions are the same as for the futex and mutex/condvar
implementations, but the slow path is different of course.  The idea
is to reset the Win32 event lazily, as part of a test-reset-test-wait
sequence.  Such a sequence is, indeed, how QemuEvents are used by
RCU and other subsystems!

The patch includes a formal model of the algorithm.
Tested-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NStefan Weil <sw@weilnetz.de>

Signed-off-by: NStefan Weil <sw@weilnetz.de>

The uninstall keys include an option key "DisplayVersion" which we set
now. By default the version value is read from file VERSION, but it is
also possible to pass VERSION=#.#.# to make.
Signed-off-by: NStefan Weil <sw@weilnetz.de>

Remove libcacard

# gpg: Signature made Wed 23 Sep 2015 22:37:11 BST using RSA key ID 75969CE5
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>"
# gpg:                 aka "Marc-André Lureau <marcandre.lureau@gmail.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276  F62D DAE8 E109 7596 9CE5

* remotes/elmarco/tags/rm-libcacard:
  libcacard: use the standalone project
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

target-arm queue:
 * support VGICv3 in KVM
 * fix bug in ACPI table entries for flash devices in virt board
 * update Allwinner entry in MAINTAINERS

# gpg: Signature made Thu 24 Sep 2015 01:29:55 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"

* remotes/pmaydell/tags/pull-target-arm-20150924:
  MAINTAINERS: update Allwinner A10 maintainer
  hw/arm/virt-acpi-build: Fix wrong size of flash in ACPI table
  hw/arm/virt: Add gic-version option to virt machine
  hw/intc: Initial implementation of vGICv3
  arm_kvm: Do not assume particular GIC type in kvm_arch_irqchip_create()
  intc/gic: Extract some reusable vGIC code
  hw/intc: Implement GIC-500 base class
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Change the maintainer for Allwinner A10 to myself as Li Guang's mail
address bounces. While at it, extend the file pattern for the entry to
include allwinner_emac.[ch].
Signed-off-by: NBeniamino Galvani <b.galvani@gmail.com>
Reviewed-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 1442865156-5598-1-git-send-email-b.galvani@gmail.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

While virt machine creates two flash devices with total size 0x08000000,
the ACPI table generation code was wrongly using this total size as the
size of each flash device, so it would overlap other MMIO spaces.
Make each device entry in the table half the total; this brings the
ACPI table into line with the code which generates the device tree
and which creates the flash devices themselves.
Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: NAndrew Jones <drjones@redhat.com>
Reviewed-by: NWei Huang <wei@redhat.com>
Tested-by: NGraeme Gregory <graeme.gregory@linaro.org>
Message-id: 1442455041-6596-1-git-send-email-shannon.zhao@linaro.org
[PMM: edited commit message]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add gic_version to VirtMachineState, set it to value of the option
and pass it around where necessary. Instantiate devices and fdt
nodes according to the choice.

max_cpus for virt machine increased to 123 (calculated from redistributor
space available in the memory map). GICv2 compatibility check happens
inside arm_gic_common_realize().

ITS region is added to the memory map too, however currently it not used,
just reserved.
Signed-off-by: NPavel Fedin <p.fedin@samsung.com>
Tested-by: NAshok kumar <ashoks@broadcom.com>
[PMM: Added missing cpu_to_le* calls, thanks to Shannon Zhao]
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This is the initial version of KVM-accelerated GICv3 support.
State load and save are not yet supported, live migration is
not possible.

In order to get correct class name in a simpler way, gicv3_class_name()
function is implemented, similar to gic_class_name().
Signed-off-by: NPavel Fedin <p.fedin@samsung.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Tested-by: NAshok kumar <ashoks@broadcom.com>
Message-id: 69d8f01d14994d7a1a140e96aef59fd332d02293.1441784344.git.p.fedin@samsung.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This allows us to use different GIC types from v2. There are no kernels
which could advertise KVM_CAP_DEVICE_CTRL without the actual ability to
create GIC with it.

GIC version probe code moved to kvm_arm_vgic_probe() which will be used
later.
Signed-off-by: NPavel Fedin <p.fedin@samsung.com>
Reviewed-by: NEric Auger <eric.auger@linaro.org>
Tested-by: NAshok kumar <ashoks@broadcom.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 015f4d9e4a8a50dfbdd734c4730558e24a69c6dc.1441784344.git.p.fedin@samsung.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Some functions previously used only by vGICv2 are useful also for vGICv3
implementation. Untie them from GICState and make accessible from within
other modules:
- kvm_arm_gic_set_irq()
- kvm_gic_supports_attr() - moved to common code and renamed to
  kvm_device_check_attr()
- kvm_gic_access() - turned into GIC-independent kvm_device_access().
  Data pointer changed to void * because some GICv3 registers are
  64-bit wide

Some of these changes are not used right now, but they will be helpful for
implementing live migration.

Actually kvm_dist_get() and kvm_dist_put() could also be made reusable, but
they would require two extra parameters (s->dev_fd and s->num_cpu) as well as
lots of typecasts of 's' to DeviceState * and back to GICState *. This makes
the code very ugly so i decided to stop at this point. I tried also an
approach with making a base class for all possible GICs, but it would contain
only three variables (dev_fd, cpu_num and irq_num), and accessing them through
the rest of the code would be again tedious (either ugly casts or qemu-style
separate object pointer). So i disliked it too.
Signed-off-by: NPavel Fedin <p.fedin@samsung.com>
Tested-by: NAshok kumar <ashoks@broadcom.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 2ef56d1dd64ffb75ed02a10dcdaf605e5b8ff4f8.1441784344.git.p.fedin@samsung.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This class is to be used by both software and KVM implementations of GICv3

Currently it is mostly a placeholder, but in future it is supposed to hold
qemu's representation of GICv3 state, which is necessary for migration.

The interface of this class is fully compatible with GICv2 one. This is
done in order to simplify integration with existing code.
Signed-off-by: NShlomo Pongratz <shlomo.pongratz@huawei.com>
Signed-off-by: NPavel Fedin <p.fedin@samsung.com>
Reviewed-by: NEric Auger <eric.auger@linaro.org>
Tested-by: NAshok kumar <ashoks@broadcom.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: aff8baaee493cdcab0694b4a1d4dd5ff27c37ed2.1441784344.git.p.fedin@samsung.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

libcacard is now a standalone project hosted with the Spice project (see
the 2.5.0 release announcement), remove it from qemu tree.

Use the library if found during configure or if --enable-smartcard.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NMichael Tokarev <mjt@tls.msk.ru>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Tested-by: NPaolo Bonzini <pbonzini@redhat.com>

VFIO updates 2015-09-23

 - Tracing improvements to use common prefixes for functional areas
 - Quirks overhaul:
   - Split PCI quirks to separate file
   - Make them understandable and more extensible
   - Improve use of MemoryRegions and eliminate use of target pagesize
 - Eliminate build-time debugging, everything migrated to runtime opts

# gpg: Signature made Wed 23 Sep 2015 21:09:05 BST using RSA key ID 3BB08B22
# gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>"
# gpg:                 aka "Alex Williamson <alex@shazbot.org>"
# gpg:                 aka "Alex Williamson <alwillia@redhat.com>"
# gpg:                 aka "Alex Williamson <alex.l.williamson@gmail.com>"

* remotes/awilliam/tags/vfio-update-20150923.0:
  vfio/pci: Add emulated PCI IDs
  vfio/pci: Cache vendor and device ID
  vfio/pci: Move AMD device specific reset to quirks
  vfio/pci: Remove old config window and mirror quirks
  vfio/pci: Config mirror quirk
  vfio/pci: Config window quirks
  vfio/pci: Rework RTL8168 quirk
  vfio/pci: Cleanup Nvidia 0x3d0 quirk
  vfio/pci: Cleanup ATI 0x3c3 quirk
  vfio/pci: Foundation for new quirk structure
  vfio/pci: Cleanup ROM blacklist quirk
  vfio/pci: Split quirks to a separate file
  vfio/pci: Extract PCI structures to a separate header
  vfio: Change polarity of our no-mmap option
  vfio/pci: Make interrupt bypass runtime configurable
  vfio/pci: Rename MSI/X functions for easier tracing
  vfio/pci: Rename INTx functions for easier tracing
  vfio/pci: Cleanup vfio_early_setup_msix() error path
  vfio/pci: Cleanup RTL8168 quirk and tracing
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>