- 05 10月, 2009 1 次提交
-
-
由 Jan Kiszka 提交于
Deprecate -localtime, -setdate and -rtc-td-hack in favor of a new unified command line switch: -rtc [base=utc|localtime|date][,driftfix=none|slew] Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 11 9月, 2009 1 次提交
-
-
由 Gerd Hoffmann 提交于
start switching chardevs to QemuOpts. This patch adds the infrastructure and converts the null device. The patch brings two new functions: qemu_chr_open_opts() same as qemu_chr_open(), but uses QemuOpts instead of a option char string. qemu_chr_parse_compat() accepts a traditional chardev option string, returns the corresponding QemuOpts instance, to handle backward compatibility. The patch also adds a new -chardev switch which can be used to create named+unconnected chardevs, like this: -chardev null,id=test This uses the new qemu_chr_open_opts. Thus with this patch alone only the null device works. The other devices will follow ... Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 04 9月, 2009 1 次提交
-
-
由 Andre Przywara 提交于
extend QEMU's internal help and man page to cover the recently added multi-core feature. Signed-off-by: NAndre Przywara <andre.przywara@amd.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 28 8月, 2009 1 次提交
-
-
由 Christoph Hellwig 提交于
Now that do have a nicer interface to work against we can add Linux native AIO support. It's an extremly thing layer just setting up an iocb for the io_submit system call in the submission path, and registering an eventfd with the qemu poll handler to do complete the iocbs directly from there. This started out based on Anthony's earlier AIO patch, but after estimated 42,000 rewrites and just as many build system changes there's not much left of it. To enable native kernel aio use the aio=native sub-command on the drive command line. I have also added an option to qemu-io to test the aio support without needing a guest. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 24 8月, 2009 2 次提交
-
-
由 Anthony Liguori 提交于
The ne2k is an ancient card that performs pretty terribly under QEMU. In many modern OSes, there is no longer drivers available for the ne2k. Switch the default network adapter to e1000. This card is more widely suppported and performs rather well under QEMU. There may be very old OSes that had a ne2k driver but not an e1000 driver but I think this is likely the exception. I think the average user is better served with an e1000 vs ne2k. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
kqemu introduces a number of restrictions on the i386 target. The worst is that it prevents large memory from working in the default build. Furthermore, kqemu is fundamentally flawed in a number of ways. It relies on the TSC as a time source which will not be reliable on a multiple processor system in userspace. Since most modern processors are multicore, this severely limits the utility of kqemu. kvm is a viable alternative for people looking to accelerate qemu and has the benefit of being supported by the upstream Linux kernel. If someone can implement work arounds to remove the restrictions introduced by kqemu, I'm happy to avoid and/or revert this patch. N.B. kqemu will still function in the 0.11 series but this patch removes it from the 0.12 series. Paul, please Ack or Nack this patch. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 11 8月, 2009 1 次提交
-
-
由 Gerd Hoffmann 提交于
One use case will be file for drives (no filename quoting issues), i.e. -drive id=test,if=virtio -set drive.test.file=/vmdisk/test-virtio.img It will work for any other option (assuming handled by QemuOpts) though. Except for id= for obvious reasons ;). Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Message-Id:
-
- 28 7月, 2009 1 次提交
-
-
由 Jes Sorensen 提交于
Follow on patch will use it to determine the size of the MADT and other BIOS tables. Signed-off-by: NJes Sorensen <jes@sgi.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 27 7月, 2009 1 次提交
-
-
由 Gerd Hoffmann 提交于
The -device switch is the users frontend to the qdev_device_add function added by the previous patch. Also adds a linked list where command line options can be saved. Use it for the new -device and for the -usbdevice and -bt switches. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 16 7月, 2009 1 次提交
-
-
由 Jan Kiszka 提交于
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 10 7月, 2009 4 次提交
-
-
由 Anthony Liguori 提交于
-no-kqemu -> -enable-kqemu kqemu is still present at compile time by default Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andi Kleen 提交于
Set the Linux process name to the name argument specified with name. I find this useful to see which guests are taking CPU time in top. This doesn't affect ps, which checks argv[0], but rewriting the environment uses much more code, so I only used this simple way. v2: Use separate process= argument, no prefixes. Signed-off-by: NAndi Kleen <ak@linux.intel.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Kevin Wolf 提交于
The performance of qcow2 has improved meanwhile, so we don't need to special-case it any more. Switch the default to write-through caching like all other block drivers. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Mark McLoughlin 提交于
On reflection, perhaps it does make sense to set a default value for the sndbuf= tap parameter. For best effect, sndbuf= should be set to just below the capacity of the physical NIC. Setting it higher will cause packets to be dropped before the limit is hit. Setting it much lower will not cause any problems unless you set it low enough such that the guest cannot queue up new packets before the NIC has emptied its queue. In Linux, txqueuelen=1000 by default for ethernet NICs. Given a 1500 byte MTU, 1Mb is a good choice for sndbuf. If it turns out that txqueuelen is actually much lower than this, then sndbuf is essentially disabled. In the event that txqueuelen is much higher, it's unlikely that the NIC will be able to empty a 1Mb queue. Thanks to Herbert Xu for this logic. Signed-off-by: NMark McLoughlin <markmc@redhat.com> Cc: Herbert Xu <herbert.xu@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 30 6月, 2009 2 次提交
-
-
由 Markus Armbruster 提交于
We want to do (at least) two things to the virtio-balloon device: suppress it, and control its PCI address. Option -no-virtio-balloon lets us do only the former. To get the latter, replace -no-virtio-balloon with -balloon none disable balloon device -balloon virtio[,addr=str] enable virtio balloon device (default) Syntax suggested by Anthony Liguori. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Alexander Graf 提交于
The documentation shows how to use -kernel and friends for booting Linux, but obviously knows nothing about multiboot yet. Let's include some documentation for multiboot, so people know how to fully exploit this cool new feature. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 29 6月, 2009 3 次提交
-
-
由 Jan Kiszka 提交于
Extend the hostfwd rule format so that the user can specify on which host interface qemu should listen for incoming connections. If omitted, binding will takes place against all interfaces. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
With the internal IP configuration made more flexible, we can now enhance the user interface. This patch adds a number of new options to "-net user": net (address and mask), host, dhcpstart, dns and smbserver. It also renames "redir" to "hostfwd" and "channel" to "guestfwd" in order to (hopefully) clarify their meanings. The format of guestfwd is extended so that the user can define not only the port but also the virtual server's IP address the forwarding starts from. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
So far a couple of slirp-related parameters were expressed via stand-alone command line options. This it inconsistent and unintuitive. Moreover, it prevents both dynamically reconfigured (host_net_add/ delete) and multi-instance slirp. This patch refactors the configuration by turning -smb, -redir, -tftp and -bootp as well as -net channel into options of "-net user". The old stand-alone command line options are still processed, but no longer advertised. This allows smooth migration of management applications to to the new syntax and also the extension of that syntax later in this series. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 24 6月, 2009 1 次提交
-
-
由 Michael S. Tsirkin 提交于
Add an option to specify the number of MSI-X vectors for PCI NIC cards. This can also be used to disable MSI-X, for compatibility with old qemu. This option currently only affects virtio cards. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 22 6月, 2009 3 次提交
-
-
由 Mark McLoughlin 提交于
2.6.30 adds a new TUNSETSNDBUF ioctl() which allows a send buffer limit for the tap device to be specified. When this limit is reached, a tap write() will return EAGAIN and poll() will indicate the fd isn't writable. This allows people to tune their setups so as to avoid e.g. UDP packet loss when the sending application in the guest out-runs the NIC in the host. There is no obviously sensible default setting - a suitable value depends mostly on the capabilities of the physical NIC through which the packets are being sent. Also, note that when using a bridge with netfilter enabled, we currently never get EAGAIN because netfilter causes the packet to be immediately orphaned. Set /proc/sys/net/bridge/bridge nf-call-iptables to zero to disable this behaviour. Signed-off-by: NMark McLoughlin <markmc@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Markus Armbruster 提交于
Make drive_init() accept addr=, put the value into struct DriveInfo. Use it in all the places that create virtio-blk-pci devices: pc_init1(), bamboo_init(), mpc8544ds_init(). Don't support addr= in third argument of monitor command pci_add and second argument of drive_add, because that clashes with their first arguments. Admittedly unelegant. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Markus Armbruster 提交于
Make net_client_init() accept addr=, put the value into struct NICinfo. Use it in pci_nic_init(), and remove arguments bus and devfn. Don't support addr= in third argument of monitor command pci_add, because that clashes with its first argument. Admittedly unelegant. Machines "malta" and "r2d" have a default NIC with a well-known PCI address. Deal with that the same way as the NIC model: make pci_nic_init() take an optional default to be used when the user doesn't specify one. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 14 6月, 2009 1 次提交
-
-
由 Eduardo Habkost 提交于
This new option may be used to disable the virtio-balloon device. Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 10 6月, 2009 1 次提交
-
-
由 Blue Swirl 提交于
Fix this warning: ./qemu-options.h:198:1: error: expected preprocessor identifier Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 04 5月, 2009 1 次提交
-
-
由 Aurelien Jarno 提交于
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
- 01 5月, 2009 1 次提交
-
-
由 Richard W.M. Jones 提交于
Here is an updated hardware watchdog patch, which should fix everything that was raised about the previous version ... Signed-off-by: NRichard W.M. Jones <rjones@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 22 4月, 2009 5 次提交
-
-
由 aliguori 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7228 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
- configure script and build system changes. - wind up new machine type. - add -xen-* command line options. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7219 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
adds a -numa command line parameter and sets a QEMU global array with the memory sizes. The CPU-to-node assignemnt is written into the CPUState. If no specific values for memory and CPUs are given, all resources will be split equally across all nodes. This code currently support only up to 64 virtual CPUs. Signed-off-by: NAndre Przywara <andre.przywara@amd.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7210 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
Allow to establish a TCP/UDP connection redirection also via a monitor command 'host_net_redir'. Moreover, assume TCP as connection type if that parameter is omitted. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7204 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
This patch is derived from Tristan Gingold's patch. It adds a new VLAN client type that writes all traffic on the VLAN it is attached to into a pcap file. Such a file can then be analyzed offline with Wireshark or tcpdump. Besides rebasing and some minor cleanups, the major differences to the original version are: - support for enabling/disabling via the monitor (host_net_add/remove) - no special ordering of VLAN client list, qemu_send_packet now takes care of properly ordered packets - 64k default capturing limit (I hate tcpdump's default) Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7200 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 19 4月, 2009 1 次提交
-
-
由 blueswir1 提交于
Basically a recursive ":%s/USE_KQEMU/CONFIG_KQEMU/g". Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7189 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 18 4月, 2009 1 次提交
-
-
由 aliguori 提交于
Create a new -smbios option (x86-only) to allow binary SMBIOS entries to be passed through to the BIOS or modify the default values of individual fields of type 0 and 1 entries on the command line. Binary SMBIOS entries can be generated as follows: dmidecode -t 1 -u | grep $'^\t\t[^"]' | xargs -n1 | \ perl -lne 'printf "%c", hex($_)' > smbios_type_1.bin These can then be passed to the BIOS using this switch: -smbios file=smbios_type_1.bin Command line generation supports the following syntax: -smbios type=0[,vendor=str][,version=str][,date=str][,release=%d.%d] -smbios type=1[,manufacturer=str][,product=str][,version=str][,serial=str] [,uuid=$(uuidgen)][,sku=str][,family=str] For instance, to add a serial number to the type 1 table: -smbios type=1,serial=0123456789 Interface is extensible to support more fields/tables as needed. aliguori: remove texi formatting from help output Signed-off-by: NAlex Williamson <alex.williamson@hp.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7163 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 08 4月, 2009 1 次提交
-
-
由 pbrook 提交于
Signed-off-by: NPaul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7035 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 06 4月, 2009 4 次提交
-
-
由 aliguori 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7006 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aurel32 提交于
This replaces a compile time option for some targets and adds this feature to targets which did not have a compile time option. Add monitor command to enable or disable single step mode. Modify monitor command "info status" to display single step mode. Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7004 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
Introduce a more canonical gdbstub configuration (system emulation only) via the new switch '-gdb dev'. Keep '-s' as shorthand for '-gdb tcp::1234'. Use the same syntax also for the corresponding monitor command 'gdbserver'. Its default remains to listen on TCP port 1234. Changes in v4: - Rebased over new command line switches meta file Changes in v3: - Fix documentation Changes in v2: - Support for pipe-based like to gdb (target remote | qemu -gdb stdio) - Properly update the qemu-doc Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6992 c046a42c-6fe2-441c-8c8c-71466251a162
-
由 aliguori 提交于
On Windows default screen width for the command prompt (A.K.A. "DOS window") is 80 chars. `-icount' help is 87 chars wide. So make it fit. Signed-off-by: NRobert Riebisch <rr@bttr-software.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6991 c046a42c-6fe2-441c-8c8c-71466251a162
-
- 28 3月, 2009 1 次提交
-
-
由 blueswir1 提交于
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6885 c046a42c-6fe2-441c-8c8c-71466251a162
-