The emulation functions which supply default BlockDriver .bdrv_*()
functions given another implemented .bdrv_*() function should not use
public bdrv_*() interfaces.  This patch ensures they invoke .bdrv_*()
directly to avoid adding an extra layer of coroutine request processing
and possibly entering an infinite loop.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

We will unify block layer request processing across sync, aio, and
coroutines and this means a .bdrv_co_*() emulation function should not
call back into the public interface.  There's no need here, just call
.bdrv_aio_*() directly.

The gory details: bdrv_co_io_em() cannot call back into the public
bdrv_aio_*() interface since that will be handled using coroutines,
which causes us to call into bdrv_co_io_em() again in an infinite loop
:).
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

path2[PATH_MAX] can be used for the null termination, so make the array big
enough to allow this.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The unused code was detected using cppcheck.

Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

cppcheck reported memory leaks and mismatched g_malloc() with free()
instead of g_free().

Fix these errors.

Cc: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Contains the I/O status for the given device. The key is only present
if the device supports it and the VM is configured to stop on errors.

Please, check the documentation being added in this commit for more
information.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This commit adds support to the BlockDriverState type to keep track
of devices' I/O status.

There are three possible status: BDRV_IOS_OK (no error), BDRV_IOS_ENOSPC
(no space error) and BDRV_IOS_FAILED (any other error). The distinction
between no space and other errors is important because a management
application may want to watch for no space in order to extend the
space assigned to the VM and put it to run again.

Qemu devices supporting the I/O status feature have to enable it
explicitly by calling bdrv_iostatus_enable() _and_ have to be
configured to stop the VM on errors (ie. werror=stop|enospc or
rerror=stop).

In case of multiple errors being triggered in sequence only the first
one is stored. The I/O status is always reset to BDRV_IOS_OK when the
'cont' command is issued.

Next commits will add support to some devices and extend the
query-block/info block commands to return the I/O status information.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The error handling order was in the wrong order, so that either the ACB would
be leaked or the counter would be decremented when it shouldn't.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Allow to resize images that reside on host devices up to the available
space.  This allows to grow images after resizing the device manually or
vice versa.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: Nmalc <av1474@comtv.ru>

* upstream: (87 commits)
  target-alpha: Fix compilation errors for 32 bit hosts
  target-alpha: Add high-resolution access to wall clock and an alarm.
  target-alpha: Implement HALT IPR.
  target-alpha: Implement WAIT IPR.
  target-alpha: Add CLIPPER emulation.
  target-alpha: Add custom PALcode image for CLIPPER emulation.
  target-alpha: Honor icount for RPCC instruction.
  tcg/s390: Remove unused tcg_out_addi()
  tcg/ia64: Remove unused tcg_out_addi()
  ARM: fix segfault
  ppc64: Fix linker script
  pseries: Implement set-time-of-day RTAS function
  pseries: Refactor spapr irq allocation
  PPC: Clean up BookE timer code
  PPC: booke timers
  KVM: PPC: Use HIOR setting for -M pseries with PR KVM
  KVM: Update kernel headers
  KVM: Update kernel headers
  PPC: Fix heathrow PIC to use little endian MMIO
  PPC: Fix via-cuda memory registration
  ...

Conflicts:
	hw/milkymist-uart.c
	hw/ppce500_mpc8544ds.c
Signed-off-by: NAvi Kivity <avi@redhat.com>

On i386, these errors were reported:

qemu/hw/alpha_dp264.c: In function ‘clipper_init’:
qemu/hw/alpha_dp264.c:158: error: integer constant is too large for ‘unsigned long’ type

qemu/hw/alpha_typhoon.c: In function ‘typhoon_init’:
qemu/hw/alpha_typhoon.c:737: error: integer constant is too large for ‘long’ type
qemu/hw/alpha_typhoon.c:741: error: integer constant is too large for ‘long’ type
qemu/hw/alpha_typhoon.c:745: error: integer constant is too large for ‘long’ type
qemu/hw/alpha_typhoon.c:749: error: integer constant is too large for ‘long’ type
qemu/hw/alpha_typhoon.c:757: error: integer constant is too large for ‘long’ type
qemu/hw/alpha_typhoon.c:767: error: integer constant is too large for ‘long’ type
qemu/hw/alpha_typhoon.c:772: error: integer constant is too large for ‘long’ type
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

* 'axp-system-7' of git://repo.or.cz/qemu/rth:
  target-alpha: Add high-resolution access to wall clock and an alarm.
  target-alpha: Implement HALT IPR.
  target-alpha: Implement WAIT IPR.
  target-alpha: Add CLIPPER emulation.
  target-alpha: Add custom PALcode image for CLIPPER emulation.
  target-alpha: Honor icount for RPCC instruction.

The alarm is a fully general one-shot time comparator, which will be
usable under Linux as a hrtimer source.  It's much more flexible than
the RTC source available on real hardware.

The wall clock allows the guest access to the host timekeeping.  Much
like the KVM wall clock source for other guests.

Both are accessed via the PALcode Cserve entry point.
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>

This is a DP264 variant, SMP capable, no unusual hardware present.

The emulation does not currently include any PCI IOMMU code.
Hopefully the generic support for that can be merged to HEAD soon.
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>

* 'for-upstream' of git://git.serverraum.org/git/mw/qemu-lm32:
  milkymist: new interrupt map
  milkymist_uart: support new core version
  lm32: add missing qemu_init_vcpu() call

* 'tracing' of git://repo.or.cz/qemu/stefanha:
  trace: add arguments to bdrv_co_io_em() trace event
  trace: trace monitor qmp dispatch/completion
  trace: trace bdrv_open_common()
  hmp: re-enable trace-file command

Remove the unused function tcg_out_addi() from the s390 TCG backend;
this brings it into line with other backends.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Remove the unused function tcg_out_addi() from the ia64 TCG backend;
this brings it into line with other backends.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

* 'ppc-next' of git://repo.or.cz/qemu/agraf: (64 commits)
  ppc64: Fix linker script
  pseries: Implement set-time-of-day RTAS function
  pseries: Refactor spapr irq allocation
  PPC: Clean up BookE timer code
  PPC: booke timers
  KVM: PPC: Use HIOR setting for -M pseries with PR KVM
  KVM: Update kernel headers
  KVM: Update kernel headers
  PPC: Fix heathrow PIC to use little endian MMIO
  PPC: Fix via-cuda memory registration
  ppc: move ADB stuff from ppc_mac.h to adb.h
  openpic: Unfold write_IRQreg
  openpic: Unfold read_IRQreg
  ppc405: use RAM_ADDR_FMT instead of %08lx
  Gdbstub: handle read of fpscr
  vscsi: send the CHECK_CONDITION status down together with autosense data
  pseries: Implement hcall-bulk hypervisor interface
  Implement POWER7's CFAR in TCG
  ppc: booke206: use MAV=2.0 TSIZE definition, fix 4G pages
  ppc: booke206: add "info tlb" support
  ...

Fix a bug in bccd9ec5,
target-arm/op_helper.c missed a change unlike all other targets.
This lead to a NULL pointer dereferences.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Since commit 8733f609 (Fix linker scripts) linking on Linux/ppc64 fails:

  LINK  ppc64-linux-user/qemu-ppc64
/usr/lib64/gcc/powerpc64-suse-linux/4.3/../../../../powerpc64-suse-linux/bin/ld:/home/afaerber/qemu/ppc64.ld:84: syntax error
collect2: ld gab 1 als Ende-Status zurück
make[1]: *** [qemu-ppc64] Fehler 1
make: *** [subdir-ppc64-linux-user] Fehler 2

Fix by removing a leftover line in the ppc64 linker script.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Currently there is no implementation for set-time-of-day rtas function,
which causes the following warning "setting the clock failed (-1)" on
the guest.

This patch just creates this function, get the timedate diff and store in
the papr environment, so that the correct value will be returned by
get-time-of-day.

In order to try it, just adjust the hardware time, run hwclock --systohc,
so that, on when the system runs hwclock --hctosys, the value is correctly
adjusted, i.e. the host time plus the timediff.
Signed-off-by: NBreno Leitao <brenohl@br.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Paulo Bonzini changed the original spapr code, which manually assigned irq
numbers for each virtual device, to allocate them automatically from the
device initialization. That allowed spapr virtual devices to be constructed
with -device, which is a good start.  However, the way that patch worked
doesn't extend nicely for the future when we want to support devices other
than sPAPR VIO devices (e.g. virtio and PCI).

This patch rearranges the irq allocation to be global across the sPAPR
environment, so it can be used by other bus types as well.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The BookE timer code had some written-but-not-read variables. Get rid
of them.
Signed-off-by: NAlexander Graf <agraf@suse.de>

While working on the emulation of the freescale p2010 (e500v2) I realized that
there's no implementation of booke's timers features. Currently mpc8544 uses
ppc_emb (ppc_emb_timers_init) which is close but not exactly like booke (for
example booke uses different SPR).
Signed-off-by: NFabien Chouteau <chouteau@adacore.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

When running with PR KVM, we need to set HIOR directly. Thankfully there
is now a new interface to set registers individually so we can just use that
and poke HIOR into the guest vcpu's HIOR register.

While at it, this also sets SDR1 because -M pseries requires it to run.

With this patch, -M pseries works properly with PR KVM.
Signed-off-by: NAlexander Graf <agraf@suse.de>

Update HIOR and generic register get/set.
Signed-off-by: NAlexander Graf <agraf@suse.de>

Removes ABI-breaking HIOR parts - KVM patch to follow.
Signed-off-by: NAlexander Graf <agraf@suse.de>