Eliminate the following "custom" macros since they are just duplicates
of net/eth.h macros under a different name:

  ETHER_ADDR_LEN -> ETH_ALEN
  ETH_P_8021Q -> ETH_P_VLAN
  IP_HEADER_LENGTH -> IP_HDR_GET_LEN
  TCP_FLAG_FIN -> TH_FIN
  TCP_FLAG_PUSH -> TH_PUSH
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NJason Wang <jasowang@redhat.com>
Message-id: 1438604157-29664-3-git-send-email-stefanha@redhat.com

The transmit offload features inspect Ethernet, IP, TCP, and UDP
headers.  Avoid redefining these net/eth.h structs.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NJason Wang <jasowang@redhat.com>
Message-id: 1438604157-29664-2-git-send-email-stefanha@redhat.com

guest_base must be used only in linux-user mode.
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Message-id: 1440757421-9674-1-git-send-email-laurent@vivier.eu
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Fix a capitalization error in the OS X build instructions;
this was picked up in review of commit b352153f and intended to be
corrected before I applied it, but I accidentally didn't include it.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

qemu-doc.texi: Add information on compiling source code on Mac OS X

Add information to the documentation on how to build QEMU
on Mac OS X.
Signed-off-by: NJohn Arbuckle <programmingkidx@gmail.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
[PMM: fixed a minor capitalization error]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

tci patch queue

# gpg: Signature made Wed 26 Aug 2015 19:51:07 BST using RSA key ID 677450AD
# gpg: Good signature from "Stefan Weil <sw@weilnetz.de>"
# gpg:                 aka "Stefan Weil <stefan.weil@weilnetz.de>"
# gpg:                 aka "Stefan Weil <stefan.weil@bib.uni-mannheim.de>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4923 6FEA 75C9 5D69 8EC2  B78A E08C 21D5 6774 50AD

* remotes/weil/tags/pull-tci-20150826:
  exec-all: Translate TCI return addresses backwards too
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This subtraction of return addresses applies directly to TCI as well as
host-TCG. This fixes Linux boots for at least Microblaze, CRIS, ARM and
SH4 when using TCI.

[sw: Removed indentation for preprocessor statement]
[sw: The patch also fixes Linux boot for x86_64]
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>

vnc: fix memory corruption (CVE-2015-5225)

# gpg: Signature made Wed 26 Aug 2015 17:37:21 BST using RSA key ID D3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"

* remotes/kraxel/tags/pull-cve-2015-5225-20150826-1:
  vnc: fix memory corruption (CVE-2015-5225)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The _cmp_bytes variable added by commit "bea60dd7 ui/vnc: fix potential
memory corruption issues" can become negative.  Result is (possibly
exploitable) memory corruption.  Reason for that is it uses the stride
instead of bytes per scanline to apply limits.

For the server surface is is actually fine.  vnc creates that itself,
there is never any padding and thus scanline length always equals stride.

For the guest surface scanline length and stride are typically identical
too, but it doesn't has to be that way.  So add and use a new variable
(guest_ll) for the guest scanline length.  Also rename min_stride to
line_bytes to make more clear what it actually is.  Finally sprinkle
in an assert() to make sure we never use a negative _cmp_bytes again.
Reported-by: N范祚至(库特) <zuozhi.fzz@alibaba-inc.com>
Reviewed-by: NP J P <ppandit@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

target-arm queue:
 * add missing EL2/EL3 TLBI operations
 * add missing EL2/EL3 ATS operations
 * add missing EL2/EL3 registers
 * update Xilinx MAINTAINERS info
 * Xilinx: connect the four OCM banks

# gpg: Signature made Tue 25 Aug 2015 16:22:43 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"

* remotes/pmaydell/tags/pull-target-arm-20150825-1:
  target-arm: Implement AArch64 TLBI operations on IPAs
  target-arm: Implement missing EL3 TLB invalidate operations
  target-arm: Implement missing EL2 TLBI operations
  target-arm: Restrict AArch64 TLB flushes to the MMU indexes they must touch
  target-arm: Move TLBI ALLE1/ALLE1IS definitions into numeric order
  cputlb: Add functions for flushing TLB for a single MMU index
  target-arm: Implement AArch32 ATS1H* operations
  target-arm: Enable the AArch32 ATS12NSO ops
  target-arm: Add CP_ACCESS_TRAP_UNCATEGORIZED_EL2, 3
  target-arm: Wire up AArch64 EL2 and EL3 address translation ops
  target-arm: there is no TTBR1 for 32-bit EL2 stage 1 translations
  target-arm: Implement missing ACTLR registers
  target-arm: Implement missing AFSR registers
  target-arm: Implement missing AMAIR registers
  target-arm: Add missing MAIR_EL3 and TPIDR_EL3 registers
  MAINTAINERS: Add ZynqMP to MAINTAINERS file
  MAINTAINERS: Update Xilinx Maintainership
  xlnx-zynqmp: Connect the four OCM banks
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Implement the AArch64 TLBI operations which take an intermediate
physical address and invalidate stage 2 translations.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1439548879-1972-7-git-send-email-peter.maydell@linaro.org

Implement the remaining stage 1 TLB invalidate operations
visible from EL3.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1439548879-1972-6-git-send-email-peter.maydell@linaro.org

Implement the missing TLBI operations that exist only
if EL2 is implemented.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1439548879-1972-5-git-send-email-peter.maydell@linaro.org

Now we have the ability to flush the TLB only for specific MMU indexes,
update the AArch64 TLB maintenance instruction implementations to only
flush the parts of the TLB they need to, rather than doing full flushes.

We take the opportunity to remove some duplicate functions (the per-asid
tlb ops work like the non-per-asid ones because we don't support
flushing a TLB only by ASID) and to bring the function names in line
with the architectural TLBI operation names.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1439548879-1972-4-git-send-email-peter.maydell@linaro.org

Move the two regdefs for TLBI ALLE1 and TLBI ALLE1IS down so that the
whole set of AArch64 TLBI regdefs is arranged in numeric order.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1439548879-1972-3-git-send-email-peter.maydell@linaro.org

Guest CPU TLB maintenance operations may be sufficiently
specialized to only need to flush TLB entries corresponding
to a particular MMU index. Implement cputlb functions for
this, to avoid the inefficiency of flushing TLB entries
which we don't need to.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1439548879-1972-2-git-send-email-peter.maydell@linaro.org

Implement the AArch32 ATS1H* operations which perform
Hyp mode stage 1 translations.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1437751263-21913-6-git-send-email-peter.maydell@linaro.org

Apply the correct conditions in the ats_access() function for
the ATS12NSO* address translation operations:
 * succeed at EL2 or EL3
 * normal UNDEF trap from NS EL1
 * trap to EL3 from S EL1 (only possible if EL3 is AArch64)

(This change means they're now available in our EL3-supporting
CPUs when they would previously always UNDEF.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1437751263-21913-5-git-send-email-peter.maydell@linaro.org

Some coprocessor register access functions need to be able
to report "trap to EL3 with an 'uncategorized' syndrome";
add the necessary CPAccessResult enum and handling for it.

I don't currently know of any registers that need to trap
to EL2 with the 'uncategorized' syndrome, but adding the
_EL2 enum as well is trivial and fills in what would
otherwise be an odd gap in the handling.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1437751263-21913-4-git-send-email-peter.maydell@linaro.org

Wire up the AArch64 EL2 and EL3 address translation operations
(AT S12E1*, AT S12E0*, AT S1E2*, AT S1E3*), and correct some
errors in the ats_write64() function in previously unused code
that would have done the wrong kind of lookup for accesses from
EL3 when SCR.NS==0.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1437751263-21913-3-git-send-email-peter.maydell@linaro.org

For EL2 stage 1 translations, there is no TTBR1. We were already
handling this for 64-bit EL2; add the code to take the 'no TTBR1'
code path for 64-bit EL2 as well.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1437751263-21913-2-git-send-email-peter.maydell@linaro.org

We already implemented ACTLR_EL1; add the missing ACTLR_EL2 and
ACTLR_EL3, for consistency.

Since we don't currently have any CPUs that need the EL2/EL3
versions to reset to non-zero values, implement as RAZ/WI.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1438281398-18746-5-git-send-email-peter.maydell@linaro.org

The AFSR registers are implementation dependent auxiliary fault
status registers. We already implemented a RAZ/WI AFSR0_EL1 and
AFSR_EL1; add the missing AFSR{0,1}_EL{2,3} for consistency.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1438281398-18746-4-git-send-email-peter.maydell@linaro.org

The AMAIR registers are for providing auxiliary implementation
defined memory attributes. We already implemented a RAZ/WI
AMAIR_EL1; add the EL2 and EL3 versions for consistency.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1438281398-18746-3-git-send-email-peter.maydell@linaro.org

Add the AArch64 registers MAIR_EL3 and TPIDR_EL3, which are the only
two which we had implemented the 32-bit Secure equivalents of but
not the 64-bit Secure versions.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 1438281398-18746-2-git-send-email-peter.maydell@linaro.org

Add the Xilinx ZynqMP SoC and EP108 machine to the maintainers
file.
Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: fed078103a0b02cfb3adadbe8e80e4420d554505.1436486024.git.alistair.francis@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Peter C is leaving Xilinx, so update the maintainer list
to point to Alistair and Edgar from Xilinx and Peter's
personal email address.
Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 54b4c070452bac05aa3a9c1d75899bc097fef831.1436486024.git.alistair.francis@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The Xilinx EP108 has four separate OCM banks which are located
adjacent to each other. This patch adds the four banks to
the ZynqMP SoC.
Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: afa6ba31163a5d541a0bef4b0dc11f2597e0c495.1436813543.git.alistair.francis@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

queued tcg patches

# gpg: Signature made Mon 24 Aug 2015 19:37:15 BST using RSA key ID 4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg:                 aka "Richard Henderson <rth@redhat.com>"
# gpg:                 aka "Richard Henderson <rth@twiddle.net>"

* remotes/rth/tags/pull-tcg-20150824:
  linux-user: remove useless macros GUEST_BASE and RESERVED_VA
  linux-user: remove --enable-guest-base/--disable-guest-base
  tcg/aarch64: Use softmmu fast path for unaligned accesses
  tcg/s390: Use softmmu fast path for unaligned accesses
  tcg/ppc: Improve unaligned load/store handling on 64-bit backend
  tcg/i386: use softmmu fast path for unaligned accesses
  tcg: Remove tcg_gen_trunc_i64_i32
  tcg: Split trunc_shr_i32 opcode into extr[lh]_i64_i32
  tcg: update README about size changing ops
  tcg/optimize: add optimizations for ext_i32_i64 and extu_i32_i64 ops
  tcg: implement real ext_i32_i64 and extu_i32_i64 ops
  tcg: don't abuse TCG type in tcg_gen_trunc_shr_i64_i32
  tcg: rename trunc_shr_i32 into trunc_shr_i64_i32
  tcg/optimize: allow constant to have copies
  tcg/optimize: track const/copy status separately
  tcg/optimize: add temp_is_const and temp_is_copy functions
  tcg/optimize: optimize temps tracking
  tcg/optimize: fix constant signedness
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

As we have removed CONFIG_USE_GUEST_BASE, we always use a guest base
and the macros GUEST_BASE and RESERVED_VA become useless: replace
them by their values.
Reviewed-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Message-Id: <1440420834-8388-1-git-send-email-laurent@vivier.eu>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

All tcg host architectures now support the guest base and as
there is no real performance lost, it can be always enabled.

Anyway, guest base use can be disabled lively by setting guest
base to 0.

CONFIG_USE_GUEST_BASE is defined as (USE_GUEST_BASE && USER_ONLY),
it should have to be replaced by CONFIG_USER_ONLY in non CONFIG_USER_ONLY
parts, but as some other parts are using !CONFIG_SOFTMMU I have chosen to
use !CONFIG_SOFTMMU instead.
Reviewed-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Message-Id: <1440373328-9788-2-git-send-email-laurent@vivier.eu>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>

Currently, we get to the slow path for any unaligned access in the
backend, because we effectively preserve the bottom address bits
below the alignment requirement when comparing with the TLB entry,
so any non-0 bit there will cause the compare to fail.

For the same number of instructions, we can instead add the access
size - 1 to the address and stick to clearing all the bottom bits.

That means that normal unaligned accesses will not fallback (the HW
will handle them fine). Only when crossing a page boundary well we
end up having a mismatch because we'll end up pointing to the next
page which cannot possibly be in that same TLB entry.
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Message-Id: <1437455978.5809.2.camel@kernel.crashing.org>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Softmmu unaligned load/stores currently goes through through the slow
path for two reasons:
  - to support unaligned access on host with strict alignement
  - to correctly handle accesses crossing pages

x86 is only concerned by the second reason. Unaligned accesses are
avoided by compilers, but are not uncommon. We therefore would like
to see them going through the fast path, if they don't cross pages.

For that we can use the fact that two adjacent TLB entries can't contain
the same page. Therefore accessing the TLB entry corresponding to the
first byte, but comparing its content to page address of the last byte
ensures that we don't cross pages. We can do this check without adding
more instructions in the TLB code (but increasing its length by one
byte) by using the LEA instruction to combine the existing move with the
size addition.

On an x86-64 host, this gives a 3% boot time improvement for a powerpc
guest and 4% for an x86-64 guest.

[rth: Tidied calculation of the offset mask]
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Message-Id: <1436467197-2183-1-git-send-email-aurelien@aurel32.net>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Replacing it with tcg_gen_extrl_i64_i32.
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Rather than allow arbitrary shift+trunc, only concern ourselves
with low and high parts.  This is all that was being used anyway.
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

They behave the same as ext32s_i64 and ext32u_i64 from the constant
folding and zero propagation point of view, except that they can't
be replaced by a mov, so we don't compute the affected value.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NRichard Henderson <rth@twiddle.net>

Implement real ext_i32_i64 and extu_i32_i64 ops. They ensure that a
32-bit value is always converted to a 64-bit value and not propagated
through the register allocator or the optimizer.

Cc: Andrzej Zaborowski <balrogg@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Stefan Weil <sw@weilnetz.de>
Acked-by: NClaudio Fontana <claudio.fontana@huawei.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NRichard Henderson <rth@twiddle.net>