Add an entry to the MAINTAINERS file for our softfloat FPU
emulation code. This code is only 'odd fixes' but it's useful to
record who to cc on patches to it.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1453814875-440-1-git-send-email-peter.maydell@linaro.org

We now do not use the int_fast*_t types anywhere in QEMU, so we can
remove the compatibility definitions we were providing for the
benefit of ancient Solaris versions.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Message-id: 1453807806-32698-5-git-send-email-peter.maydell@linaro.org

Use the plain 'int' type rather than 'int_fast16_t' for handling
exponents. Exponents don't need to be exactly 16 bits, so using int16_t
for them would confuse more than it clarified.

This should be a safe change because int_fast16_t semantics
permit use of 'int' (and on 32-bit glibc that is what you get).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Message-id: 1453807806-32698-4-git-send-email-peter.maydell@linaro.org

Use the plain 'int' type rather than 'int_fast16_t' for shift counts
in the various shift related functions, since we don't actually care
about the size of the integer at all here, and using int16_t would
be confusing.

This should be a safe change because int_fast16_t semantics
permit use of 'int' (and on 32-bit glibc that is what you get).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Message-id: 1453807806-32698-3-git-send-email-peter.maydell@linaro.org

Make the functions which convert floating point to 16 bit integer
return int16_t rather than int_fast16_t, and correspondingly use
int_fast16_t in their internal implementations where appropriate.

(These functions are used only by the ARM target.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Message-id: 1453807806-32698-2-git-send-email-peter.maydell@linaro.org

The r4k_tlb_t structure uses the uint_fast*_t types. Most of these
uses are in bitfields and are thus pointless, because the bitfield
itself specifies the width of the type; just use 'unsigned int'
instead. (On glibc uint_fast16_t is defined as either 32 or 64 bits,
so we know the code is not reliant on it being exactly 16 bits.)
There is also one use of uint_fast8_t, which we replace with uint8_t,
because both are exactly 8 bits on glibc and this is the only
place outside the softfloat code which uses an int_fast*_t type.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>

Error reporting patches for 2016-02-19

# gpg: Signature made Fri 19 Feb 2016 12:47:50 GMT using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"

* remotes/armbru/tags/pull-error-2016-02-19:
  vl: Clean up machine selection in main().
  vl: Set error location when parsing memory options
  replay: Set error location properly when parsing options
  vl: Reset location after handling command-line arguments
  vl.c: Fix regression in machine error message
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

QAPI patches for 2016-02-19

# gpg: Signature made Fri 19 Feb 2016 10:10:18 GMT using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"

* remotes/armbru/tags/pull-qapi-2016-02-19:
  qapi: Change visit_start_implicit_struct to visit_start_alternate
  qapi: Don't box branches of flat unions
  qapi: Don't box struct branch of alternate
  qapi-visit: Use common idiom in gen_visit_fields_decl()
  qapi: Emit structs used as variants in topological order
  qapi: Adjust layout of FooList types
  qapi-visit: Less indirection in visit_type_Foo_fields()
  qapi-visit: Unify struct and union visit
  qapi: Visit variants in visit_type_FOO_fields()
  qapi-visit: Simplify how we visit common union members
  qapi: Add tests of complex objects within alternate
  qapi: Forbid 'any' inside an alternate
  qapi: Forbid empty unions and useless alternates
  qapi: Simplify excess input reporting in input visitors
  qapi-visit: Honor prefix of discriminator enum
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

We set machine_class to the default first, and update it to the real
one later.  Any use of machine_class in between is almost certainly
wrong (there are no such uses right now).  Set it once and for all
instead.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Reviewed-by: NMarcel Apfelbaum <marcel@redhat.com>

Set error location so the error_report() calls will show
appropriate command-line argument or config file info.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Message-Id: <1455303747-19776-5-git-send-email-ehabkost@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

Set error location so the error_report() calls will show
appropriate command-line argument or config file info.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Message-Id: <1455303747-19776-4-git-send-email-ehabkost@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

After looping through all command-line arguments, error location
info becomes obsolete, and any function calling error_report()
will print misleading information. This breaks error reporting
for some option handling, like:

  $ qemu-system-x86_64 -icount rr=x -vnc :0
  qemu-system-x86_64: -vnc :0: Invalid icount rr option: x

  $ qemu-system-x86_64 -m size= -vnc :0
  qemu-system-x86_64: -vnc :0: missing 'size' option value

Fix this by resetting location info as soon as we exit the
command-line handling loop.

With this, replay_configure() and set_memory_options() won't
print any location info yet, but at least they won't print
incorrect information.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Message-Id: <1455303747-19776-3-git-send-email-ehabkost@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
["Do not insert code here" comment added to prevent regressions]
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

Commit e1ce0c3c (vl.c: fix regression when reading machine type
from config file) fixed the error message when the machine type
was supplied inside the config file. However now the option name
is not displayed correctly if the error happens when the machine
is specified at command line.

Running
    ./x86_64-softmmu/qemu-system-x86_64 -M q35-1.5 -redir tcp:8022::22
will result in the error message:
    qemu-system-x86_64: -redir tcp:8022::22: unsupported machine type
    Use -machine help to list supported machines

Fixed it by restoring the error location and also extracted the code
dealing with machine options into a separate function.
Reported-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NLaszlo Ersek <lersek@redhat.com>
Signed-off-by: NMarcel Apfelbaum <marcel@redhat.com>
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Message-Id: <1455303747-19776-2-git-send-email-ehabkost@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

vhost, virtio, pci, pxe

Fixes all over the place.
New tests for pxe.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Thu 18 Feb 2016 15:46:39 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"

* remotes/mst/tags/for_upstream:
  tests/vhost-user-bridge: add scattering of incoming packets
  vhost-user interrupt management fixes
  rules: filter out irrelevant files
  change type of pci_bridge_initfn() to void
  dec: convert to realize()
  tests: add pxe e1000 and virtio-pci tests
  msix: fix msix_vector_masked
  virtio: optimize virtio_access_is_big_endian() for little-endian targets
  vhost: simplify vhost_needs_vring_endian()
  vhost: move virtio 1.0 check to cross-endian helper
  virtio: move cross-endian helper to vhost
  vhost-net: revert support of cross-endian vnet headers
  virtio-net: use the backend cross-endian capabilities
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

After recent changes, the only remaining use of
visit_start_implicit_struct() is for allocating the space needed
when visiting an alternate.  Since the term 'implicit struct' is
hard to explain, rename the function to its current usage.  While
at it, we can merge the functionality of visit_get_next_type()
into the same function, making it more like visit_start_struct().

Generated code is now slightly smaller:

| {
|     Error *err = NULL;
|
|-    visit_start_implicit_struct(v, (void**) obj, sizeof(BlockdevRef), &err);
|+    visit_start_alternate(v, name, (GenericAlternate **)obj, sizeof(**obj),
|+                          true, &err);
|     if (err) {
|         goto out;
|     }
|-    visit_get_next_type(v, name, &(*obj)->type, true, &err);
|-    if (err) {
|-        goto out_obj;
|-    }
|     switch ((*obj)->type) {
|     case QTYPE_QDICT:
|         visit_start_struct(v, name, NULL, 0, &err);
...
|     }
|-out_obj:
|-    visit_end_implicit_struct(v);
|+    visit_end_alternate(v);
| out:
|     error_propagate(errp, err);
| }
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-Id: <1455778109-6278-16-git-send-email-eblake@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

There's no reason to do two malloc's for a flat union; let's just
inline the branch struct directly into the C union branch of the
flat union.

Surprisingly, fewer clients were actually using explicit references
to the branch types in comparison to the number of flat unions
thus modified.

This lets us reduce the hack in qapi-types:gen_variants() added in
the previous patch; we no longer need to distinguish between
alternates and flat unions.

The change to unboxed structs means that u.data (added in commit
cee2dedb) is now coincident with random fields of each branch of
the flat union, whereas beforehand it was only coincident with
pointers (since all branches of a flat union have to be objects).
Note that this was already the case for simple unions - but there
we got lucky.  Remember, visit_start_union() blindly returns true
for all visitors except for the dealloc visitor, where it returns
the value !!obj->u.data, and that this result then controls
whether to proceed with the visit to the variant.  Pre-patch,
this meant that flat unions were testing whether the boxed pointer
was still NULL, and thereby skipping visit_end_implicit_struct()
and avoiding a NULL dereference if the pointer had not been
allocated.  The same was true for simple unions where the current
branch had pointer type, except there we bypassed visit_type_FOO().
But for simple unions where the current branch had scalar type, the
contents of that scalar meant that the decision to call
visit_type_FOO() was data-dependent - the reason we got lucky there
is that visit_type_FOO() for all scalar types in the dealloc visitor
is a no-op (only the pointer variants had anything to free), so it
did not matter whether the dealloc visit was skipped.  But with this
patch, we would risk leaking memory if we could skip a call to
visit_type_FOO_fields() based solely on a data-dependent decision.

But notice: in the dealloc visitor, visit_type_FOO() already handles
a NULL obj - it was only the visit_type_implicit_FOO() that was
failing to check for NULL. And now that we have refactored things to
have the branch be part of the parent struct, we no longer have a
separate pointer that can be NULL in the first place.  So we can just
delete the call to visit_start_union() altogether, and blindly visit
the branch type; there is no change in behavior except to the dealloc
visitor, where we now unconditionally visit the branch, but where that
visit is now always safe (for a flat union, we can no longer
dereference NULL, and for a simple union, visit_type_FOO() was already
safely handling NULL on pointer types).

Unfortunately, simple unions are not as easy to switch to unboxed
layout; because we are special-casing the hidden implicit type with
a single 'data' member, we really DO need to keep calling another
layer of visit_start_struct(), with a second malloc; although there
are some cleanups planned for simple unions in later patches.

visit_start_union() and gen_visit_implicit_struct() are now unused.
Drop them.

Note that after this patch, the only remaining use of
visit_start_implicit_struct() is for alternate types; the next patch
will do further cleanup based on that fact.
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-Id: <1455778109-6278-14-git-send-email-eblake@redhat.com>
[Dead code deletion squashed in, commit message updated accordingly]
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

There's no reason to do two malloc's for an alternate type visiting
a QAPI struct; let's just inline the struct directly as the C union
branch of the struct.

Surprisingly, no clients were actually using the struct member prior
to this patch outside of the testsuite; an earlier patch in the series
added some testsuite coverage to make the effect of this patch more
obvious.

In qapi.py, c_type() gains a new is_unboxed flag to control when we
are emitting a C struct unboxed within the context of an outer
struct (different from our other two modes of usage with no flags
for normal local variable declarations, and with is_param for adding
'const' in a parameter list).  I don't know if there is any more
pythonic way of collapsing the two flags into a single parameter,
as we never have a caller setting both flags at once.

Ultimately, we want to also unbox branches for QAPI unions, but as
that touches a lot more client code, it is better as separate
patches.  But since unions and alternates share gen_variants(), I
had to hack in a way to test if we are visiting an alternate type
for setting the is_unboxed flag: look for a non-object branch.
This works because alternates have at least two branches, with at
most one object branch, while unions have only object branches.
The hack will go away in a later patch.

The generated code difference to qapi-types.h is relatively small:

| struct BlockdevRef {
|     QType type;
|     union { /* union tag is @type */
|         void *data;
|-        BlockdevOptions *definition;
|+        BlockdevOptions definition;
|         char *reference;
|     } u;
| };

The corresponding spot in qapi-visit.c calls visit_type_FOO(), which
first calls visit_start_struct() to allocate or deallocate the member
and handle a layer of {} from the JSON stream, then visits the
members.  To peel off the indirection and the memory management that
comes with it, we inline this call, then suppress allocation /
deallocation by passing NULL to visit_start_struct(), and adjust the
member visit:

|     switch ((*obj)->type) {
|     case QTYPE_QDICT:
|-        visit_type_BlockdevOptions(v, name, &(*obj)->u.definition, &err);
|+        visit_start_struct(v, name, NULL, 0, &err);
|+        if (err) {
|+            break;
|+        }
|+        visit_type_BlockdevOptions_fields(v, &(*obj)->u.definition, &err);
|+        error_propagate(errp, err);
|+        err = NULL;
|+        visit_end_struct(v, &err);
|         break;
|     case QTYPE_QSTRING:
|         visit_type_str(v, name, &(*obj)->u.reference, &err);

The visit of non-object fields is unchanged.
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-Id: <1455778109-6278-13-git-send-email-eblake@redhat.com>
[Commit message tweaked]
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

We have several instances of methods that do an early exit if
output is not needed, then log that output is being generated,
and finally produce the output; see qapi-types.py:gen_object()
and qapi-visit.py:gen_visit_implicit_struct().  The odd man
out was gen_visit_fields_decl(); rearrange it to be more like
the others.  No semantic change or difference to generated code.
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-Id: <1455778109-6278-12-git-send-email-eblake@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

Right now, we emit the branches of union types as a boxed pointer,
and it suffices to have a forward declaration of the type.  However,
a future patch will swap things to directly use the branch type,
instead of hiding it behind a pointer.  For this to work, the
compiler needs the full definition of the type, not just a forward
declaration, prior to the union that is including the branch type.
This patch just adds topological sorting to hoist all types
mentioned in a branch of a union to be fully declared before the
union itself.  The sort is always possible, because we do not
allow circular union types that include themselves as a direct
branch (it is, however, still possible to include a branch type
that itself has a pointer to the union, for a type that can
indirectly recursively nest itself - that remains safe, because
that the member of the branch type will remain a pointer, and the
QMP representation of such a type adds another {} for each recurring
layer of the union type).
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-Id: <1455778109-6278-11-git-send-email-eblake@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

By sticking the next pointer first, we don't need a union with
64-bit padding for smaller types.  On 32-bit platforms, this
can reduce the size of uint8List from 16 bytes (or 12, depending
on whether 64-bit ints can tolerate 4-byte alignment) down to 8.
It has no effect on 64-bit platforms (where alignment still
dictates a 16-byte struct); but fewer anonymous unions is still
a win in my book.

It requires visit_next_list() to gain a size parameter, to know
what size element to allocate; comparable to the size parameter
of visit_start_struct().

I debated about going one step further, to allow for fewer casts,
by doing:
    typedef GenericList GenericList;
    struct GenericList {
        GenericList *next;
    };
    struct FooList {
        GenericList base;
        Foo *value;
    };
so that you convert to 'GenericList *' by '&foolist->base', and
back by 'container_of(generic, GenericList, base)' (as opposed to
the existing '(GenericList *)foolist' and '(FooList *)generic').
But doing that would require hoisting the declaration of
GenericList prior to inclusion of qapi-types.h, rather than its
current spot in visitor.h; it also makes iteration a bit more
verbose through 'foolist->base.next' instead of 'foolist->next'.

Note that for lists of objects, the 'value' payload is still
hidden behind a boxed pointer.  Someday, it would be nice to do:

struct FooList {
    FooList *next;
    Foo value;
};

for one less level of malloc for each list element.  This patch
is a step in that direction (now that 'next' is no longer at a
fixed non-zero offset within the struct, we can store more than
just a pointer's-worth of data as the value payload), but the
actual conversion would be a task for another series, as it will
touch a lot of code.
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-Id: <1455778109-6278-10-git-send-email-eblake@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

We were passing 'Foo **obj' to the internal helper function, but
all uses within the helper were via reads of '*obj'.  Refactor
things to pass one less level of indirection, by having the
callers dereference before calling.

For an example of the generated code change:

|-static void visit_type_BalloonInfo_fields(Visitor *v, BalloonInfo **obj, Error **errp)
|+static void visit_type_BalloonInfo_fields(Visitor *v, BalloonInfo *obj, Error **errp)
| {
|     Error *err = NULL;
|
|-    visit_type_int(v, "actual", &(*obj)->actual, &err);
|+    visit_type_int(v, "actual", &obj->actual, &err);
|     error_propagate(errp, err);
| }
|
|@@ -261,7 +261,7 @@ void visit_type_BalloonInfo(Visitor *v,
|     if (!*obj) {
|         goto out_obj;
|     }
|-    visit_type_BalloonInfo_fields(v, obj, &err);
|+    visit_type_BalloonInfo_fields(v, *obj, &err);
| out_obj:

The refactoring will also make it easier to reuse the helpers in
a future patch when implicit structs are stored directly in the
parent struct rather than boxed through a pointer.
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-Id: <1455778109-6278-9-git-send-email-eblake@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

gen_visit_union() is now just like gen_visit_struct().  Rename
it to gen_visit_object(), use it for structs, and drop
gen_visit_struct().  Output is unchanged.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-Id: <1453902888-20457-4-git-send-email-armbru@redhat.com>
[split out variant handling, rebase to earlier changes]
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-Id: <1455778109-6278-8-git-send-email-eblake@redhat.com>

We initially created the static visit_type_FOO_fields() helper
function for reuse of code - we have cases where the initial
setup for a visit has different allocation (depending on whether
the fields represent a stand-alone type or are embedded as part
of a larger type), but where the actual field visits are
identical once a pointer is available.

Up until the previous patch, visit_type_FOO_fields() was only
used for structs (no variants), so it was covering every field
for each type where it was emitted.

Meanwhile, the code for visiting unions looks like:

static visit_type_U_fields() {
    visit base;
    visit local_members;
}
visit_type_U() {
    visit_start_struct();
    visit_type_U_fields();
    visit variants;
    visit_end_struct();
}

which splits the fields of the union visit across two functions.
Move the code to visit variants to live inside visit_type_U_fields(),
while making it conditional on having variants so that all other
instances of the helper function remain unchanged.  This is also
a step closer towards unifying struct and union visits, and towards
allowing one union type to be the branch of another flat union.

The resulting diff to the generated code is a bit hard to read,
but it can be verified that it touches only union types, and that
the end result is the following general structure:

static visit_type_U_fields() {
    visit base;
    visit local_members;
    visit variants;
}
visit_type_U() {
    visit_start_struct();
    visit_type_U_fields();
    visit_end_struct();
}
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-Id: <1455778109-6278-7-git-send-email-eblake@redhat.com>
[gen_visit_struct_fields() parameter variants made mandatory]
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

For a simple union SU, gen_visit_union() generates a visit of its
single tag member, like this:

    visit_type_SUKind(v, "type", &(*obj)->type, &err);

For a flat union FU with base B, it generates a visit of its base
fields:

    visit_type_B_fields(v, (B **)obj, &err);

Instead, we can simply visit the common members using the same fields
visit function we use for structs, generated with
gen_visit_struct_fields().  This function visits the base if any, then
the local members.

For a simple union SU, visit_type_SU_fields() contains exactly the old
tag member visit, because there is no base, and the tag member is the
only member.  For instance, the code generated for qapi-schema.json's
KeyValue changes like this:

    +static void visit_type_KeyValue_fields(Visitor *v, KeyValue **obj, Error **errp)
    +{
    +    Error *err = NULL;
    +
    +    visit_type_KeyValueKind(v, "type", &(*obj)->type, &err);
    +    if (err) {
    +        goto out;
    +    }
    +
    +out:
    +    error_propagate(errp, err);
    +}
    +
     void visit_type_KeyValue(Visitor *v, const char *name, KeyValue **obj, Error **errp)
     {
         Error *err = NULL;
    @@ -4863,7 +4911,7 @@ void visit_type_KeyValue(Visitor *v, con
         if (!*obj) {
             goto out_obj;
         }
    -    visit_type_KeyValueKind(v, "type", &(*obj)->type, &err);
    +    visit_type_KeyValue_fields(v, obj, &err);
         if (err) {
             goto out_obj;
         }

For a flat union FU, visit_type_FU_fields() contains exactly the old
base fields visit, because there is a base, but no members.  For
instance, the code generated for qapi-schema.json's CpuInfo changes
like this:

     static void visit_type_CpuInfoBase_fields(Visitor *v, CpuInfoBase **obj, Error **errp);

    +static void visit_type_CpuInfo_fields(Visitor *v, CpuInfo **obj, Error **errp)
    +{
    +    Error *err = NULL;
    +
    +    visit_type_CpuInfoBase_fields(v, (CpuInfoBase **)obj, &err);
    +    if (err) {
    +        goto out;
    +    }
    +
    +out:
    +    error_propagate(errp, err);
    +}
    +
     static void visit_type_CpuInfoX86_fields(Visitor *v, CpuInfoX86 **obj, Error **errp)
...
    @@ -3485,7 +3509,7 @@ void visit_type_CpuInfo(Visitor *v, cons
         if (!*obj) {
             goto out_obj;
         }
    -    visit_type_CpuInfoBase_fields(v, (CpuInfoBase **)obj, &err);
    +    visit_type_CpuInfo_fields(v, obj, &err);
         if (err) {
             goto out_obj;
         }

As you see, the generated code grows a bit, but in practice, it's lost
in the noise: qapi-schema.json's qapi-visit.c gains roughly 1%.

This simplification became possible with commit 441cbac0 "qapi-visit:
Convert to QAPISchemaVisitor, fixing bugs".  It's a step towards
unifying gen_struct() and gen_union().
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-Id: <1453902888-20457-2-git-send-email-armbru@redhat.com>
[improve commit message examples]
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-Id: <1455778109-6278-6-git-send-email-eblake@redhat.com>
[Commit message tweaked]

Upcoming patches will adjust how we visit an object branch of an
alternate; but we were completely lacking testsuite coverage.
Rectify this, so that the future patches will be able to highlight
the changes and still prove that we avoided regressions.

In particular, the use of a flat union UserDefFlatUnion rather
than a simple struct UserDefA as the branch will give us coverage
of an object with variants.  And visiting an alternate as both
the top level and as a nested member gives confidence in correct
memory allocation handling, especially if the test is run under
valgrind.
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-Id: <1455778109-6278-5-git-send-email-eblake@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

The whole point of an alternate is to allow some type-safety while
still accepting more than one JSON type.  Meanwhile, the 'any'
type exists to bypass type-safety altogether.  The two are
incompatible: you can't accept every type, and still tell which
branch of the alternate to use for the parse; fix this to give a
sane error instead of a Python stack trace.

Note that other types that can't be alternate members are caught
earlier, by check_type().
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-Id: <1455778109-6278-4-git-send-email-eblake@redhat.com>
[Commit message tweaked]
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

Empty unions serve no purpose, and while we compile with gcc
which permits them, strict C99 forbids them.  We happen to inject
a dummy 'void *data' member into the C unions that represent QAPI
unions and alternates, but we want to get rid of that member (it
pollutes the namespace for no good reason), which would leave us
with an empty union if the user didn't provide any branches.  While
empty structs make sense in QAPI, empty unions don't add any
expressiveness to the QMP language.  So prohibit them at parse
time.  Update the documentation and testsuite to match.

Note that the documentation already mentioned that alternates
should have "two or more JSON data types"; so this also fixes
the code to enforce that.  However, we have existing uses of a
union type with only one branch, so the 2-or-more strictness
is intentionally limited to alternates.
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-Id: <1455778109-6278-3-git-send-email-eblake@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

When reporting that an unvisited member remains at the end of an
input visit for a struct, we were using g_hash_table_find()
coupled with a callback function that always returns true, to
locate an arbitrary member of the hash table.  But if all we
need is an arbitrary entry, we can get that from a single-use
iterator, without needing a tautological callback function.

Technically, our cast of &(GQueue *) to (void **) is not strict
C (while void * must be able to hold all other pointers, nothing
says a void ** has to be the same width or representation as a
GQueue **).  The kosher way to write it would be the verbose:

    void *tmp;
    GQueue *any;
    if (g_hash_table_iter_next(&iter, NULL, &tmp)) {
        any = tmp;

But our code base (not to mention glib itself) already has other
cases of assuming that ALL pointers have the same width and
representation, where a compiler would have to go out of its way
to mis-compile our borderline behavior.
Suggested-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <1455778109-6278-2-git-send-email-eblake@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

When we added support for a user-specified prefix for an enum
type (commit 351d36e4), we forgot to teach the qapi-visit code
to honor that prefix in the case of using a prefixed enum as
the discriminator for a flat union.  While there is still some
on-list debate on whether we want to keep prefixes, we should
at least make it work as long as it is still part of the code
base.
Reported-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-Id: <1455665965-27638-1-git-send-email-eblake@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

This patch adds to the vubr test the scattering of incoming
packets to the chain of RX buffer.  Also, this patch corrects the
size of the header preceding the packet in RX buffers.

Note that this patch doesn't add the support for mergeable
buffers.
Signed-off-by: NVictor Kaplansky <victork@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

target-arm queue:
 * implement or fix various EL3 trap behaviour for system registers
 * clean up the trap/undef handling of the SRS instruction
 * add some missing AArch64 performance monitor system registers
 * implement reset for the PL061 GPIO device
 * QOMify sd.c and the pxa2xx_mmci device
 * SD card emulation fixes for booting Tianocore UEFI on RPi2
 * QOMify various ARM timer devices

# gpg: Signature made Thu 18 Feb 2016 15:19:31 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg:                 aka "Peter Maydell <pmaydell@gmail.com>"
# gpg:                 aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"

* remotes/pmaydell/tags/pull-target-arm-20160218-1: (36 commits)
  hw/timer: QOM'ify pxa2xx_timer
  hw/timer: QOM'ify pl031
  hw/timer: QOM'ify exynos4210_rtc
  hw/timer: QOM'ify exynos4210_pwm
  hw/timer: QOM'ify exynos4210_mct
  hw/timer: QOM'ify arm_timer (pass 2)
  hw/timer: QOM'ify arm_timer (pass 1)
  hw/sd: use guest error logging rather than fprintf to stderr
  hw/sd: model a power-up delay, as a workaround for an EDK2 bug
  hw/sd: implement CMD23 (SET_BLOCK_COUNT) for MMC compatibility
  hw/sd/pxa2xx_mmci: Add reset function
  hw/sd/pxa2xx_mmci: Convert to VMStateDescription
  hw/sd/pxa2xx_mmci: Update to use new SDBus APIs
  hw/sd/pxa2xx_mmci: convert to SysBusDevice object
  sdhci_sysbus: Create SD card device in users, not the device itself
  hw/sd/sdhci.c: Update to use SDBus APIs
  hw/sd: Add QOM bus which SD cards plug in to
  hw/sd/sd.c: Convert sd_reset() function into Device reset method
  hw/sd/sd.c: QOMify
  hw/sd/sdhci.c: Remove x-drive property
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

* split the old SysBus init function into an instance_init
  and a Device realize function
* use DeviceClass::realize instead of SysBusDeviceClass::init
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: Nxiaoqiang zhao <zxq_yx_007@163.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

assign pl031_init to pl031_info.instance_init and drop the
SysBusDeviceClass::init
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: Nxiaoqiang zhao <zxq_yx_007@163.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

assign exynos4210_rtc_init to exynos4210_rtc_info.instance_init
and drop the SysBusDeviceClass::init
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: Nxiaoqiang zhao <zxq_yx_007@163.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

assign exynos4210_pwm_init to exynos4210_pwm_info.instance_init
and drop the SysBusDeviceClass::init
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: Nxiaoqiang zhao <zxq_yx_007@163.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

assign exynos4210_mct_init to exynos4210_mct_info.instance_init
and drop the SysBusDeviceClass::init
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: Nxiaoqiang zhao <zxq_yx_007@163.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

assign DeviceClass::vmsd instead of using vmstate_register function
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: Nxiaoqiang zhao <zxq_yx_007@163.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

* assign icp_pit_init to icp_pit_info.instance_init
* split the old SysBus init function into an instance_init
  and a Device realize function
* use DeviceClass::realize instead of SysBusDeviceClass::init
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: Nxiaoqiang zhao <zxq_yx_007@163.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Some of these errors may be harmless (e.g. probing unimplemented
commands, or issuing CMD12 in the wrong state), and may also be quite
frequent. Spamming the standard error output isn't desirable in such
cases.
Reviewed-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Signed-off-by: NAndrew Baumann <Andrew.Baumann@microsoft.com>
Message-id: 1454902521-21164-4-git-send-email-Andrew.Baumann@microsoft.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The SD spec for ACMD41 says that a zero argument is an "inquiry"
ACMD41, which does not start initialisation and is used only for
retrieving the OCR. However, Tianocore EDK2 (UEFI) has a bug [1]: it
first sends an inquiry (zero) ACMD41. If that first request returns an
OCR value with the power up bit (0x80000000) set, it assumes the card
is ready and continues, leaving the card in the wrong state. (My
assumption is that this works on hardware, because no real card is
immediately powered up upon reset.)

This change models a delay of 0.5ms from the first ACMD41 to the power
being up. However, it also immediately sets the power on upon seeing a
non-zero (non-enquiry) ACMD41. This speeds up UEFI boot, it should
also account for guests that simply delay after card reset and then
issue an ACMD41 that they expect will succeed.

[1] https://github.com/tianocore/edk2/blob/master/EmbeddedPkg/Universal/MmcDxe/MmcIdentification.c#L279
(This is the loop starting with "We need to wait for the MMC or SD
card is ready")
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrew Baumann <Andrew.Baumann@microsoft.com>
Message-id: 1454902521-21164-3-git-send-email-Andrew.Baumann@microsoft.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>