- 18 6月, 2015 3 次提交
-
-
由 Peter Maydell 提交于
Update OpenBIOS images # gpg: Signature made Wed Jun 17 20:06:06 2015 BST using RSA key ID AE0F321F # gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" * remotes/mcayland/tags/qemu-openbios-signed: Update OpenBIOS images Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Leon Alrae 提交于
Include linux/vfio.h after sys/ioctl.h, just like in hw/vfio/common.c. Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com> Acked-by: NAlex Williamson <alex.williamson@redhat.com> Message-id: 1434544500-22405-1-git-send-email-leon.alrae@imgtec.com Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Mark Cave-Ayland 提交于
Update OpenBIOS images to SVN r1340 built from submodule. Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
-
- 17 6月, 2015 32 次提交
-
-
由 Peter Maydell 提交于
Patch queue for s390 - 2015-06-17 This is a special one. Two awesome features in one pull request: - CCW support for TCG - Watchpoint support for TCG To celebrate this, we also switch the default machine model from s390-virtio to s390-ccw and give users a fully working s390x model again! # gpg: Signature made Wed Jun 17 11:42:26 2015 BST using RSA key ID 03FEDC60 # gpg: Good signature from "Alexander Graf <agraf@suse.de>" # gpg: aka "Alexander Graf <alex@csgraf.de>" * remotes/agraf/tags/signed-s390-for-upstream: (26 commits) s390x: Switch to s390-ccw machine as default target-s390x: PER: add Breaking-Event-Address register target-s390x: PER instruction-fetch nullification event support target-s390x: PER store-using-real-address event support target-s390x: PER storage-alteration event support translate-all: fix watchpoints if retranslation not possible target-s390x: PER instruction-fetch event support target-s390x: PER successful-branching event support target-s390x: basic PER event handling target-s390x: add get_per_in_range function target-s390x: add get_per_atmid function target-s390x: add PER related constants target-s390x: mvc_fast_memmove: access memory through softmmu target-s390x: mvc_fast_memset: access memory through softmmu target-s390x: function to adjust the length wrt page boundary softmmu: provide tlb_vaddr_to_host function for user mode target-s390x: wire up I/O instructions in TCG mode target-s390x: wire up DIAG REIPL in TCG mode target-s390x: wire up DIAG IPL in TCG mode target-s390x: fix s390_cpu_initial_reset ... Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Alexander Graf 提交于
We now finally have TCG support for the basic set of instructions necessary to run the s390-ccw machine. That means in any aspect possible that machine type is now superior to the legacy s390-virtio machine. Switch over to the ccw machine as default. That way people don't get a halfway broken machine with the s390x target. Signed-off-by: NAlexander Graf <agraf@suse.de> Reviewed-by: NAurelien Jarno <aurelien@aurel32.net> Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Aurelien Jarno 提交于
This patch adds support for PER Breaking-Event-Address register. Like real hardware, it save the current PSW address when the PSW address is changed by an instruction. We have to take care of optimizations QEMU does, a branch to the next instruction is still a branch. This register is copied to low core memory when a program exception happens. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Aurelien Jarno 提交于
For the instruction-fetch nullification event, we just reuse the existing instruction-fetch code and trigger the exception immediately in that case. There is no need to save the CPU state in the TCG code as it has been saved by the previous instruction before calling the per_check_exception helper. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Aurelien Jarno 提交于
This PER event happens each time the STURA or STURG instructions are used. As they use helpers, we can just save the event in the PER code there, if enabled. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Aurelien Jarno 提交于
For the PER storage-alteration event we can use the QEMU watchpoint infrastructure. When PER is enabled or PER control register changed we enable the corresponding watchpoints. When a watchpoint arises we can save the event. Unfortunately the current code does not provide the address space used to trigger the watchpoint. For now we assume it comes from the default ASC. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Aurelien Jarno 提交于
The tb_check_watchpoint function currently assumes that all memory access is done either directly through the TCG code or through an helper which knows its return address. This is obviously wrong as the helpers use cpu_ldxx/stxx_data functions to access the memory. Instead of aborting in that case, don't try to retranslate the code, but assume that the CPU state (and especially the program counter) has been saved before calling the helper. Then invalidate the TB based on this address. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Aurelien Jarno 提交于
For the PER instruction-fetch, we can't use the QEMU breakpoint infrastructure as it triggers for a single address and not a full address range, and as it actually stop before the instruction and not before. We therefore call an helper with the just fetched instruction address, which check if the address is within the PER address range. If it is the case, an event is recorded and will be signaled through an exception. Note that we implement here the PER-3 behaviour, that is an invalid opcode is not considered as an instruction fetch. Without PER-3 this behavious is undefined. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Aurelien Jarno 提交于
For the PER successful-branching event support, we can't rely on any QEMU infrastucture. We therefore call an helper in all places where a branch can be taken. We have to pay attention to the branch to next case, as it's still a taken branch. We don't need to care about the cases using goto_tb, as we have disabled them in the previous patch. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Aurelien Jarno 提交于
This patch add basic support to generate PER exceptions. It adds two fields to the cpu structure to record for the PER address and PER code & ATMID values. When an exception is triggered and a PER event is pending, the two PER values are copied to the lowcore area. At the end of an instruction, an helper is checking for a possible pending PER event and triggers an exception in that case. For that to work with branches, we need to disable TB chaining when PER is activated. Fortunately it's already in the TB flags. Finally in case of a SERVICE CALL exception, we need to trigger the PER exception immediately after. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Aurelien Jarno 提交于
This function checks if an address is in between the PER starting address and the PER ending address, taking care of a possible address range loop. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Aurelien Jarno 提交于
This function returns the ATMID field that is stored in the per_perc_atmid lowcore entry. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Aurelien Jarno 提交于
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Aurelien Jarno 提交于
mvc_fast_memmove is bypassing the softmmu functions, getting the physical source and destination addresses using the mmu_translate function and accessing the corresponding physical memory. This prevents watchpoints to work correctly. Instead use the tlb_vaddr_to_host function to get the host addresses corresponding to the guest source and destination addresses through the softmmu code and fallback to the byte level code in case the corresponding address are not in the QEMU TLB or being examined through a watchpoint. As a bonus it works even for area crossing pages by splitting the are into chunks contained in a single page, bringing some performances improvements. We can therefore remove the 8-byte loads/stores method, as it is now quite unlikely to be used. At the same time change the name of the function to fast_memmove as it's not specific to mvc and use the same argument order as the C memmove function. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Aurelien Jarno 提交于
mvc_fast_memset is bypassing the softmmu functions, getting the physical address using the mmu_translate function and accessing the corresponding physical memory. This prevents watchpoints to work correctly. Instead use the tlb_vaddr_to_host function to get the host address corresponding to the guest address through the softmmu code and fallback to the byte level code in case the corresponding address is not in the QEMU TLB or being examined through a watchpoint. As a bonus it works even for area crossing pages by splitting the are into chunks contained in a single page, bringing some performances improvements. At the same time change the name of the function to fast_memset as it's not specific to mvc and use the same argument order as the C memset function. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Aurelien Jarno 提交于
This patch adds a function to adjust the length of a transfer so that it doesn't cross a page boundary in softmmu mode. It does nothing in user mode. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Aurelien Jarno 提交于
To avoid to many #ifdef in target code, provide a tlb_vaddr_to_host for both user and softmmu modes. In the first case the function always succeed and just call the g2h function. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
The code handling the I/O instructions for KVM decodes the instruction itself. In TCG mode also pass the full instruction word to the helpers. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Aurelien Jarno 提交于
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Aurelien Jarno 提交于
DIAG IPL is already implemented for KVM, but not wired from TCG. For that change the format of the instruction so that we can get R1 and R3 numbers in addition to the function code. The diag function can change plenty of things, including CC, so we should enter with a static CC. Also it doesn't set the value of general register 2 to 0 as in the current code. We also need to exit the CPU loop after a reset, which means a new PSW. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Aurelien Jarno 提交于
The s390_cpu_initial_reset function zeroes a big part of the CPU state structure, including CPU_COMMON, and thus the QEMU TLB structure. As they should not be initialized with zeroes only, we need to call the tlb_flush to initialize it correctly. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Aurelien Jarno 提交于
env->io_index[] should be set to -1 during CPU reset to mark the I/O interrupt queue as empty. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Aurelien Jarno 提交于
env->ext_index should be initialized to -1 to mark the external interrupt queue as emtpy. This should not be done in s390_cpu_initfn as all the interrupt fields are later reset to 0 by the memset in s390_cpu_initial_reset or s390_cpu_full_reset. Move the initialization there. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Aurelien Jarno 提交于
In TCG mode we should store the CC value in env->cc_op. However do it inconditionnaly because: - the tcg_enabled function is not inlined - it's probably faster to always store the value, especially given it is likely in the same cache line than env->psw.mask. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Aurelien Jarno 提交于
This remove the corresponding error messages in TCG mode, and allow to simplify the s390_assign_subch_ioeventfd() function. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
The ioinst_schib_valid gets a SCHIB in guest endianness, we should byteswap the fields we access. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Aurelien Jarno 提交于
The I/O-Interruption Subclass field corresponds to bits 2 to 5 (BE notation) of the Interruption-Identification Word. The value should be shift by 27 instead of 24. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Peter Maydell 提交于
update seabios to release 1.8.2 add vgabios for virtio-vga # gpg: Signature made Wed Jun 17 08:34:22 2015 BST using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-seabios-1.8.2-20150617-1: update seabios and vgabios binaries tag our seabios builds update seabios submodule to release 1.8.2 Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
VirtFS update: * Fix for virtfs-proxy-helper crash * Gracefully handle the error condition on input validation in virtfs-proxy-helper # gpg: Signature made Tue Jun 16 16:21:28 2015 BST using RSA key ID 04C4E23A # gpg: Good signature from "Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 4846 9DE7 1860 360F A6E9 968C DE41 A4FE 04C4 E23A * remotes/kvaneesh/tags/for-upstream-signed: virtfs-proxy-helper: fail gracefully if socket path is too long virtfs-proxy-helper: add missing long option terminator Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
git shortlog rel-1.8.1..rel-1.8.2 ================================= Gerd Hoffmann (1): vga: rework virtio-vga support Kevin O'Connor (5): vgabios: Add config option for assembler fixups vgabios: Emulate "leal" instruction build: Support "make VERSION=xyz" to override the default build version build: CONFIG_VGA_FIXUP_ASM should depend on CONFIG_BUILD_VGABIOS vgabios: On bda_save_restore() the saved vbe_mode also has flags in it Paolo Bonzini (1): smm: ignore bits 16,18-31 of SMM revision ID Vladimir Serbinenko (1): ahci: Ignore max_ports. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 16 6月, 2015 5 次提交
-
-
由 Stefan Hajnoczi 提交于
Replace the assertion check with graceful failure when the socket path is too long. Programs should not crash on invalid input. Print an error message and exit properly. Cc: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
-
由 Stefan Hajnoczi 提交于
The getopt_long(3) long options array must have a zeroed terminator. This patch solves a segmentation fault when an unknown command-line option is encountered: $ fsdev/virtfs-proxy-helper --help Segmentation fault (core dumped) Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
-
由 Peter Maydell 提交于
virtio-gpu: pci support bits and virtio-vga. # gpg: Signature made Mon Jun 15 13:55:19 2015 BST using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-vga-20150615-1: virtio-vga: add vgabios configuration virtio-vga: add '-vga virtio' support virtio-vga: add virtio gpu device with vga compatibility virtio-gpu-pci: add virtio pci support virtio-gpu: fix error message Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Peter Maydell 提交于
linux-user patches for 2.4 softfreeze second spin with ioctl patch refreshed # gpg: Signature made Tue Jun 16 08:03:14 2015 BST using RSA key ID DE3C9BC0 # gpg: Good signature from "Riku Voipio <riku.voipio@iki.fi>" # gpg: aka "Riku Voipio <riku.voipio@linaro.org>" * remotes/riku/tags/pull-linux-user-20150616: linux-user: ioctl() command type is int linux-user: fix the breakpoint inheritance in spawned threads linux-user: use __get_user and __put_user in cmsg conversions linux-user: Fix length handling in host_to_target_cmsg linux-user: Use abi_ulong for TARGET_ELF_PAGESTART linux-user: Allocate thunk size dynamically Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
-
由 Laurent Vivier 提交于
When executing a 64bit target chroot on 64bit host, the ioctl() command can mismatch. It seems the previous commit doesn't solve the problem in my case: 9c6bf9c7 linux-user: Fix ioctl cmd type mismatch on 64-bit targets For example, a ppc64 chroot on an x86_64 host: bash-4.3# ls Unsupported ioctl: cmd=0x80087467 Unsupported ioctl: cmd=0x802c7415 The origin of the problem is in syscall.c:do_ioctl(). static abi_long do_ioctl(int fd, abi_long cmd, abi_long arg) In this case (ppc64) abi_long is long (on the x86_64), and cmd = 0x0000000080087467 then if (ie->target_cmd == cmd) target_cmd is int, so target_cmd = 0x80087467 and to compare an int with a long, the sign is extended to 64bit, so the comparison is: if (0xffffffff80087467 == 0x0000000080087467) which doesn't match whereas it should. This patch uses int in the case of the target command type instead of abi_long. Signed-off-by: NLaurent Vivier <laurent@vivier.eu> Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>
-