We should not use cpu_to_le16() here, instead each of device/function
value is stored in a 8 byte field.
Signed-off-by: NPeter Xu <peterx@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

ACPI Spec 6.0 introduces IO Remapping Table Structure. This patch
introduces the definitions required to describe the IO relationship
between the PCIe root complex and the ITS.

This conforms to:
"IO Remapping Table System Software on ARM Platforms",
Document number: ARM DEN 0049B, October 2015.
Signed-off-by: NPrem Mallappa <prem.mallappa@broadcom.com>
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NAndrew Jones <drjones@redhat.com>
Message-id: 1476707466-14300-2-git-send-email-eric.auger@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

ACPI Spec 6.0 introduces GIC Interrupt Translation Service Structure.
Here we add the definition of the Structure.
Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org>
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Message-id: 1474616617-366-8-git-send-email-eric.auger@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

To enable interrupt remapping for intel IOMMU device, each IOAPIC device
in the system reported via ACPI MADT must be explicitly enumerated under
one specific remapping hardware unit. This patch adds the root-complex
IOAPIC into the default DMAR device.

Please refer to VT-d spec 8.3.1.1 for more information.
Signed-off-by: NPeter Xu <peterx@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

In ACPI 5.1 Errata, it adds GIC version in GIC distributor structure.
This is useful for guest kernel to identify which version GIC hardware
is. Update GIC distributor structure and present GIC version in MADT
table.
Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: NAndrew Jones <drjones@redhat.com>
Message-id: 1465960955-17388-1-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

ACPI spec says that Proximity Domain is an "Integer that represents
the proximity domain to which the processor belongs". So define it as a
uint32_t.

Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: NAndrew Jones <drjones@redhat.com>
Message-id: 1461667229-9216-4-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: NAndrew Jones <drjones@redhat.com>
Message-id: 1461667229-9216-3-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add gic_version to VirtMachineState, set it to value of the option
and pass it around where necessary. Instantiate devices and fdt
nodes according to the choice.

max_cpus for virt machine increased to 123 (calculated from redistributor
space available in the memory map). GICv2 compatibility check happens
inside arm_gic_common_realize().

ITS region is added to the memory map too, however currently it not used,
just reserved.
Signed-off-by: NPavel Fedin <p.fedin@samsung.com>
Tested-by: NAshok kumar <ashoks@broadcom.com>
[PMM: Added missing cpu_to_le* calls, thanks to Shannon Zhao]
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add GICv2m description in ACPI MADT table, so guest can use MSI when
booting with ACPI.
Signed-off-by: NShannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: NAndrew Jones <drjones@redhat.com>
Tested-by: NAndrew Jones <drjones@redhat.com>
Message-id: 1434676210-2276-1-git-send-email-shannon.zhao@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

SPCR is the Serial Port Console Redirection Table. See the document
linked from http://uefi.org/acpi. For serial port types, "Interface
Type", see the documentation for the Debug Port Table 2 (DBG2).
Signed-off-by: NAndrew Jones <drjones@redhat.com>
Tested-by: NShannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Message-id: 1433929959-29530-2-git-send-email-drjones@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add a TPM2 ACPI table if a TPM 2 is used in the backend.
Also add an SSDT for the TPM 2.

Rename tpm_find() to tpm_get_version() and have this function
return the version of the TPM found, TPMVersion_Unspec if
no TPM is found. Use the version number to build version
specific ACPI tables.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

ACPI v5.1 defines GTDT for ARM devices as a place to describe timer
related information in the system. The Arch Timer interrupts must
be provided for GTDT.
Signed-off-by: NShannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Message-id: 1432522520-8068-11-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

MADT describes GIC enabled ARM platforms. The GICC and GICD
subtables are used to define the GIC regions.
Signed-off-by: NShannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Message-id: 1432522520-8068-10-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

In the case of mach virt, it is used to set the Hardware Reduced bit
and enable PSCI SMP booting through HVC. So ignore FACS and FADT
points to DSDT.

Update the header definitions for FADT taking into account the new
additions of ACPI v5.1 in `include/hw/acpi/acpi-defs.h`
Signed-off-by: NShannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org>
Message-id: 1432522520-8068-9-git-send-email-zhaoshenglong@huawei.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The ACPI related header file acpi-defs.h, includes definitions that
apply on other architectures as well. Move it in `include/hw/acpi/`
to sanely include it from other architectures.
Signed-off-by: NAlvise Rigo <a.rigo@virtualopensystems.com>
Signed-off-by: NShannon Zhao <zhaoshenglong@huawei.com>
Signed-off-by: NShannon Zhao <shannon.zhao@linaro.org>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Expose Intel IOMMU to the BIOS. If object of TYPE_INTEL_IOMMU_DEVICE exists,
add DMAR table to ACPI RSDT table. For now the DMAR table indicates that there
is only one hardware unit without INTR_REMAP capability on the platform.
Signed-off-by: NLe Tan <tamlokveer@gmail.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Add an SSDT ACPI table for the TPM device.
Add a TCPA table for BIOS logging area when a TPM is being used.

The latter follows this spec here:

http://www.trustedcomputinggroup.org/files/static_page_files/DCD4188E-1A4B-B294-D050A155FB6F7385/TCG_ACPIGeneralSpecification_PublicReview.pdf

This patch has Michael Tsirkin's patches folded in.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>

when using signature for table ID, we forgot to byte-swap it.
signatures are really ASCII strings, let's treat them as such.
While at it, get rid of most of _SIGNATURE macros.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

This adds C code for generating ACPI tables at runtime,
imported from seabios git tree
    commit 51684b7ced75fb76776e8ee84833fcfb6ecf12dd

Although ACPI tables come from a system BIOS on real hw,
it makes sense that the ACPI tables are coupled with the
virtual machine, since they have to abstract the x86 machine to
the OS's.

This is widely desired as a way to avoid the churn
and proliferation of QEMU-specific interfaces
associated with ACPI tables in bios code.

Notes:
As BIOS can reprogram devices prior to loading
ACPI tables, we pre-format ACPI tables but defer loading
hardware configuration there until tables are loaded.

The code structure was intentionally kept as close
to the seabios original as possible, to simplify
comparison and making sure we didn't lose anything
in translation.

Minor code duplication results, to help ensure there are no functional
regressions, I think it's better to merge it like this and do more code
changes in follow-up patches.

Cross-version compatibility concerns have been addressed:
    ACPI tables are exposed to guest as FW_CFG entries.
    When running with -M 1.5 and older, this patch disables ACPI
    table generation, and doesn't expose ACPI
    tables to guest.

    As table content is likely to change over time,
    the following measures are taken to simplify
    cross-version migration:
    - All tables besides the RSDP are packed in a single FW CFG entry.
      This entry size is currently 23K. We round it up to 64K
      to avoid too much churn there.
    - Tables are placed in special ROM blob (not mapped into guest memory)
      which is automatically migrated together with the guest, same
      as BIOS code.
    - Offsets where hardware configuration is loaded in ACPI tables
      are also migrated, this is in case future ACPI changes make us
      rearrange the tables in memory.

This patch reuses some code from SeaBIOS, which was originally under
LGPLv2 and then relicensed to GPLv3 or LGPLv3, in QEMU under GPLv2+. This
relicensing has been acked by all contributors that had contributed to the
code since the v2->v3 relicense. ACKs approving the v2+ relicensing are
listed below. The list might include ACKs from people not holding
copyright on any parts of the reused code, but it's better to err on the
side of caution and include them.

Affected SeaBIOS files (GPLv2+ license headers added)
<http://thread.gmane.org/gmane.comp.bios.coreboot.seabios/5949>:

 src/acpi-dsdt-cpu-hotplug.dsl
 src/acpi-dsdt-dbug.dsl
 src/acpi-dsdt-hpet.dsl
 src/acpi-dsdt-isa.dsl
 src/acpi-dsdt-pci-crs.dsl
 src/acpi.c
 src/acpi.h
 src/ssdt-misc.dsl
 src/ssdt-pcihp.dsl
 src/ssdt-proc.dsl
 tools/acpi_extract.py
 tools/acpi_extract_preprocess.py

Each one of the listed people agreed to the following:

> If you allow the use of your contribution in QEMU under the
> terms of GPLv2 or later as proposed by this patch,
> please respond to this mail including the line:
>
> Acked-by: Name <email address>
Acked-by: NGerd Hoffmann <kraxel@redhat.com>
Acked-by: NJan Kiszka <jan.kiszka@siemens.com>
Acked-by: NJason Baron <jbaron@akamai.com>
Acked-by: NDavid Woodhouse <David.Woodhouse@intel.com>
Acked-by: NGleb Natapov <gleb@redhat.com>
Acked-by: NMarcelo Tosatti <mtosatti@redhat.com>
Acked-by: NDave Frodin <dave.frodin@se-eng.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Acked-by: NKevin O'Connor <kevin@koconnor.net>
Acked-by: NLaszlo Ersek <lersek@redhat.com>
Acked-by: NKenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Acked-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Acked-by: NMagnus Christensson <magnus.christensson@intel.com>
Acked-by: NHu Tao <hutao@cn.fujitsu.com>
Acked-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Tested-by: NGerd Hoffmann <kraxel@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Tested-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>