Introduce qemu_find_vlan_client_by_name for VLANClientState lookup based
on VLAN ID and client name. This is useful for monitor commands.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Push the smb state, smb_dir, into SlirpState and construct it in a way
that allows multiple smb instances (one per slirp stack). Remove the smb
directory on slirp cleanup instead of qemu termination. As VLAN clients
are also cleaned up on process termination, no feature is lost.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Make sure for invocations from the monitor that slirp_smb properly
reports errors and doesn't terminate qemu.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Instead of open-coding this, we can use the power of the shell to remove
the smb_dir on exit.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Once again this was a long journey to reach the destination: Allow to
instantiate slirp multiple times. But as in the past, the journey was
worthwhile, cleaning up, fixing and enhancing various parts of the user
space network stack along the way.

What is this particular change good for? Multiple slirps instances
allow separated user space networks for guests with multiple NICs. This
is already possible, but without any slirp support for the second
network, ie. without a chance to talk to that network from the host via
IP. We have a legacy guest system here that benefits from this slirp
enhancement, allowing us to run both of its NICs purely over
unprivileged user space IP stacks.

Another benefit of this patch is that it simply removes an artificial
restriction of the configuration space qemu is providing, avoiding
another source of surprises that users may face when playing with
possible setups.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Allocate the internal slirp state dynamically and provide and call
slirp_cleanup to properly release it after use. This patch finally
unbreaks slirp release and re-instantiation via host_net_* monitor
commands.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This now also exports the internal state to the slirp users in qemu,
returning it from slirp_init and expecting it along with service
invocations. Additionally provide an opaque value interface for the
callbacks from slirp into the qemu core.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The essence of this patch is to stuff (almost) all global variables of
the slirp stack into the structure Slirp. In this step, we still keep
the structure as global variable, directly accessible by the whole
stack. Changes to the external interface of slirp will be applied in
the following patches.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

link_up is true once slirp is initialized, so these check are really not
required.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Again lot of dead code. Remove it.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Slirp doesn't invoke slirp[_can]_output before it is initialized. The
motivation for these checks (3b7f5d47) no longer applies. So drop
them.

Note: slirp_vc will become invalid if the slirp stack is removed during
runtime. But this is no new bug and will be fixed later.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Avoid the need for slirp_is_inited by refactoring the protected
slirp_select_* functions. This also avoids the clearing of all fd sets
on select errors.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Drop redundant typecasts in both variants and remove the pointless
round-up in the UNIX version.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Currently, ip_id is always initialized to 0 on slirp startup (despite
the broken attempt to derive it from the clock). This is good for
reproducibility. But it is not preserved across save/restore. This patch
therefore drops the dead initialization code from ip_init and introduces
ip_id to the persistent slirp state.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

In order to prepare re-initialization and multi-instance slirp, factor
out init code that is of global scope and (at least for now) only need
to be run once.

This also fixes the potentially uninitialized use of our_addr in
get_dns_addr.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This changes the filename handling from a static buffer in tftp_session
for the client-provided name + prefix to a dynamically allocated buffer
that keeps the combined path in one place.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Specifically make the filename extraction more readable, and always
report errors back to the client.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The return code of tftp_send_error is not used, drop it. And also make
sure to always terminate the session.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Perform check for set prefix early (if it's not given, tftp is disabled)
and drop redundant second check.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

As agreed on the mailing list, there is no interest in keeping the
usually disabled slirp statistics in the tree. So this patch removes
them.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

After all its years inside the qemu tree, there is no point in keeping
the dead code paths of slirp. This patch is a first round of removing
usually commented out code parts. More cleanups need to follow (and
maybe finally a proper reindention).
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Break out sockstats from the slirp statistics and present them under the
new info category "usernet". This patch also improves the current output
/wrt proper reporting connection source and destination.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Required for pretty-printing.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Prevent that the users accidentally shoots down dynamic sockets. This
allows to remove looping for removals as there can now only be one
match.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Mark sockets that describe host forwardings. This is required for their
(and only their) proper deletion and for pretty-printing.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This prepares for adding flags to socket.so_state that must not be
removed during the lifetime of a socket.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Extend the hostfwd rule format so that the user can specify on which
host interface qemu should listen for incoming connections. If omitted,
binding will takes place against all interfaces.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Improve the monitor interface for adding and removing host forwarding
rules by splitting it up in two commands and rename them to hostfwd_add
and hostfwd_remove. Also split up the paths taken for legacy -redir
support and the monitor add command as the latter will be extended later
on.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

For UDP host forwardings, fport is not stable, every outgoing packet of
the redirection can modify it. Use getsockname instead to look up the
port that is actually used on the host side.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

With the internal IP configuration made more flexible, we can now
enhance the user interface. This patch adds a number of new options to
"-net user": net (address and mask), host, dhcpstart, dns and smbserver.
It also renames "redir" to "hostfwd" and "channel" to "guestfwd" in
order to (hopefully) clarify their meanings. The format of guestfwd is
extended so that the user can define not only the port but also the
virtual server's IP address the forwarding starts from.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The user mode IP stack is currently only minimally configurable /wrt to
its virtual IP addresses. This is unfortunate if some guest has a fixed
idea of which IP addresses to use.

Therefore this patch prepares the stack for fully configurable IP
addresses and masks. The user interface and default addresses remain
untouched in this step, they will be enhanced in the following patch.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

So far a couple of slirp-related parameters were expressed via
stand-alone command line options. This it inconsistent and unintuitive.
Moreover, it prevents both dynamically reconfigured (host_net_add/
delete) and multi-instance slirp.

This patch refactors the configuration by turning -smb, -redir, -tftp
and -bootp as well as -net channel into options of "-net user". The old
stand-alone command line options are still processed, but no longer
advertised. This allows smooth migration of management applications to
to the new syntax and also the extension of that syntax later in this
series.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

In order to parse multiple instances of the same param=value pair,
introduce get_next_param_value which can pass back to string parsing
position after reading a parameter value.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This reverts commit 1c6ed9f3.

It's redundant to slirp statistics, which are going to be split up /
reworked later on.

Conflicts:

	monitor.c
	net.c
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The socket faddr/fport is already updated a few lines below, so these
are completely redundant.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Hi all,
this patch implements zooming capabilities for the sdl interface.
A new sdl_zoom_blit function is added that is able to scale and blit a
portion of a surface into another.
This way we can enable SDL_RESIZABLE and have a real_screen surface with
a different size than the guest surface and let sdl_zoom_blit take care
of the problem.
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>