The qed_bytes_to_clusters() function is normally used with size_t
lengths.  Consistency check used it with file size length and therefore
failed on 32-bit hosts when the image file is 4 GB or more.

Make qed_bytes_to_clusters() explicitly 64-bit and update consistency
check to keep 64-bit cluster counts.
Reported-by: NMichael Tokarev <mjt@tls.msk.ru>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Some commands are supposed to report a Not Ready Condition (i.e. they require
a medium to be present in order to execute successfully). Instead of
duplicating the check in each command implementation, let's add a flag and
check it before calling the command.

This patch only converts existing checks, it does not introduce new checks for
any of the other commands that can/should report a Not Ready Condition.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The disk size can only change when the medium is changed, and the change
callback takes care of updating s->nb_sectors in this case.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>

In preparation for a table of function pointers, factor each command out from
ide_atapi_cmd() into its own function.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Besides moving code, this patch only fixes some whitespace issues in the moved
code and makes all functions in atapi.c static which can be static.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

block_mig_state.total_time is currently the sum of the read request
latencies.  This is not very accurate because block migration uses aio and
so several requests can be submitted at once.  Bandwidth should be computed
with wall-clock time, not by adding the latencies.  In this case,
"total_time" has a higher value than it should, and so the computed
bandwidth is lower than it is in reality.  This means that migration can
take longer than it needs to.
However, we don't want to use pure wall-clock time here.  We are computing
bandwidth in the asynchronous phase, where the migration repeatedly wakes
up and sends some aio requests.  The computed bandwidth will be used for
synchronous transfer.
Signed-off-by: NAvishay Traeger <avishay@il.ibm.com>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

MMC-5 Table F.1 lists errors that can be thrown for the TEST_UNIT_READY
command.  Going from medium not ready to medium ready states is
communicated by throwing an error.

This adds the missing 'tray opened' event that we fail to report to
guests.  After doing this, older Linux guests properly revalidate a disc
on the change command.  HSM violation errors, which caused Linux guests
to do a soft-reset of the link, also go away:

ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
sr 1:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
         res 01/60:00:00:00:00/00:00:00:00:00/a0 Emask 0x3 (HSM violation)
ata2.00: status: { ERR }
ata2: soft resetting link
ata2.00: configured for MWDMA2
ata2: EH complete
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Acked-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Tested-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

QEMU can drop a backing file so that an image file no longer depends on
the backing file, but this feature has not been exposed in qemu-img.
This is useful in an image streaming usecase or when an image file has
been fully allocated and no reads can hit the backing file anymore.

Since the dropping the backing file can make the image unusable, only
allow this when the unsafe flag has been set.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Because the opengl library is only linked to for the lm32 target, we can
now safely enable opengl by default again.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

This patch is the first attempt to make configure more intelligent with
regard to how it links to libraries. It divides the softmmu libraries into
two lists, a general one and a list which depends on the target
architecture.
Signed-off-by: NMichael Walle <michael@walle.cc>
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Acked-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

* 'linux-user-for-upstream' of git://gitorious.org/qemu-maemo/qemu:
  linux-user: untie syscalls from UID16
  linux-user: add s390x to llseek list
  linux-user: add ioctl(SIOCGIWNAME, ...) support.
  linux-user: convert ioctl(SIOCGIFCONF, ...) result.
  linux-user: improve traces
  [v2] linux-user: bigger default stack

Work around a SPARC glibc bug which caused the epoll_create1 configure
test to wrongly claim that the function was present. Some versions of
SPARC glibc provided the function in the library but didn't declare
it in the include file; the result is that gcc warns about an implicit
declaration but a link succeeds. So we reference the function as a
value rather than a function call to induce a compile time error
if the declaration was not present.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBrad Hards <bradh@frogmouth.net>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Trace events cannot use %s in their format strings because trace
backends vary in how they can deference pointers (if at all).  Recording
const char * values is not meaningful if their contents are not recorded
too.

Change grlib trace events that rely on strings so that they communicate
similar information without using strings.

A follow-up patch explains this limitation and updates docs/tracing.txt.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Be greedy in matching the trailing "\)*" pattern.  Otherwise, all the
text in the trace string up to the last closed parenthesis is taken as
part of the prototype.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Quite a number of uid/gid related syscalls are only defined on systems
with USE_UID16 defined. This is apperently based on the idea that these
system calls would never be called on non-UID16 systems. Make these
syscalls available for all architectures that define them.

drop alpha hack to support selected UID16 syscalls. MIPS and PowerPC
were also defined as UID16, to get uid/gid syscalls available, drop
this error as well.

Change QEMU to reflect this.

Cc: Ulrich Hecht <uli@suse.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: NRiku Voipio <riku.voipio@iki.fi>

We keep a list of host architectures that do llseek with the same
syscall as lseek. S390x is one of them, so let's add it to the list.
Original-patch-by: NUlrich Hecht <uli@suse.de>
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NRiku Voipio <riku.voipio@iki.fi>

Allow to run properly following program from linux-user:

/* cc -o wifi wifi.c */

 #include <stdio.h>
 #include <sys/ioctl.h>
 #include <sys/types.h>
 #include <sys/socket.h>
 #include <linux/wireless.h>
 #include <netinet/in.h>
 #include <arpa/inet.h>
 #include <string.h>

int main(int argc, char **argv)
{
    int ret;
    struct ifreq req;
    struct sockaddr_in *addr;
    int s;

    if (argc != 2) {
        fprintf(stderr, "Need an interface name (like wlan0)\n");
	return 1;
    }

    s = socket( AF_INET, SOCK_DGRAM, 0 );
    if (s < 0) {
        perror("Cannot open socket");
        return 1;
    }
    strncpy(req.ifr_name, argv[1], sizeof(req.ifr_name));
    ret = ioctl( s, SIOCGIWNAME, &req );
    if (ret < 0) {
	fprintf(stderr, "No wireless extension\n");
        return 1;
    }

    printf("%s\n", req.ifr_name);
    printf("%s\n", req.ifr_newname);
    return 0;
}

$ ./wifi eth0
No wireless extension

$ ./wifi wlan0
wlan0
IEEE 802.11bg
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Signed-off-by: NRiku Voipio <riku.voipio@iki.fi>

The result needs to be converted as it is stored in an array of struct
ifreq and sizeof(struct ifreq) differs according to target and host
alignment rules.

This patch allows to execute correctly the following program on arm
and m68k:

 #include <stdio.h>
 #include <sys/ioctl.h>
 #include <net/if.h>
 #include <alloca.h>
 #include <string.h>
 #include <sys/socket.h>
 #include <netinet/in.h>
 #include <arpa/inet.h>

int main(void)
{
    int s, ret;
    struct ifconf ifc;
    int i;

    memset( &ifc, 0, sizeof( struct ifconf ) );
    ifc.ifc_len = 8 * sizeof(struct ifreq);
    ifc.ifc_buf = alloca(ifc.ifc_len);

    s = socket( AF_INET, SOCK_DGRAM, 0 );
    if (s < 0) {
        perror("Cannot open socket");
        return 1;
    }
    ret = ioctl( s, SIOCGIFCONF, &ifc );
    if (s < 0) {
        perror("ioctl() failed");
        return 1;
    }

    for (i = 0; i < ifc.ifc_len / sizeof(struct ifreq) ; i ++) {
        struct sockaddr_in *s;
        s = (struct sockaddr_in*)&ifc.ifc_req[i].ifr_addr;
        printf("%s\n", ifc.ifc_req[i].ifr_name);
        printf("%s\n", inet_ntoa(s->sin_addr));
    }
}
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Signed-off-by: NRiku Voipio <riku.voipio@iki.fi>

Add trace details for getpid(), kill(), _llseek(), rt_sigaction(),
rt_sigprocmask(), clone().
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Signed-off-by: NRiku Voipio <riku.voipio@iki.fi>

PTHREAD_STACK_MIN (16KB) is somewhat inadequate for a new stack for new
QEMU threads. Set new limit to 256K which should be enough, yet doesn't
increase memory pressure significantly.
Signed-off-by: NRiku Voipio <riku.voipio@nokia.com>
Reviewed-by: NNathan Froyd <froydnj@codesourcery.com>

net/slirp.c says:
    /* default settings according to historic slirp */
    struct in_addr net  = { .s_addr = htonl(0x0a000200) }; /* 10.0.2.0 */
    struct in_addr mask = { .s_addr = htonl(0xffffff00) }; /* 255.255.255.0 */
    struct in_addr host = { .s_addr = htonl(0x0a000202) }; /* 10.0.2.2 */
    struct in_addr dhcp = { .s_addr = htonl(0x0a00020f) }; /* 10.0.2.15 */
    struct in_addr dns  = { .s_addr = htonl(0x0a000203) }; /* 10.0.2.3 */

Which I think is not what the documentation says.
Signed-off-by: NBrad Hards <bradh@frogmouth.net>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

gcc can check the format string for correctness even when debugging output is
not enabled.
Have to make sure arguments are always available. They are optimized out if
unneeded.
Signed-off-by: NBenjamin Poirier <benjamin.poirier@gmail.com>
Cc: Igor V. Kovalenko <igor.v.kovalenko@gmail.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Removes double (( )) to make DEBUG_PRINT compatible with real function calls.
Change the name to DPRINTF to be consistent with other DPRINTF macros
throughout qemu.
Include the "RTL8139: " prefix in the macro. This changes some debug output
slightly since the prefix wasn't present on all lines.

Part of the change was done using the "coccinelle" tool with the following
small semantic match:
    @@ expression E; @@

    - DEBUG_PRINT((E))
    + DPRINTF(E)
Signed-off-by: NBenjamin Poirier <benjamin.poirier@gmail.com>
Cc: Igor V. Kovalenko <igor.v.kovalenko@gmail.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Prevents a compilation failure when DEBUG_RTL8139 is defined:

CC    libhw32/rtl8139.o
cc1: warnings being treated as errors
hw/rtl8139.c: In function ‘rtl8139_cplus_transmit_one’:
hw/rtl8139.c:1960: error: format ‘%8lx’ expects type ‘long unsigned int’, but argument 5 has type ‘target_phys_addr_t’
make[1]: *** [rtl8139.o] Error 1
Signed-off-by: NBenjamin Poirier <benjamin.poirier@gmail.com>
Cc: Igor V. Kovalenko <igor.v.kovalenko@gmail.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The REG_PC constant used in the ARM nwfpe code is fine in the kernel
but when used in qemu can clash with a definition in the host system
include files (in particular on Ubuntu Lucid SPARC, including signal.h
will define a REG_PC). Rename the constant to avoid this issue.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Correctly UNDEF for Neon VLD/VST "multiple structures" forms where the
align field is not valid.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Handle the UNDEF and UNPREDICTABLE cases for Neon "single element to
one lane" VLD and "single element from one lane" VST.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

This increase the correctness (precision, NaN values, corner cases) on
non-x86 machines, and add the possibility to handle the exception
correctly.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Use the new CPU86_LDouble <-> double conversion functions to make logarithmic
and trigonometric helpers working with softfloat.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Add functions to convert CPU86_LDouble to double and vice versa. They
are going to be used to implement logarithmic and trigonometric function
until softfloat implement them.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>