Use of a do/while(0) control flow in order to permit an early break
is an unusual paradigm, and triggers a false positive with a planned
future syntax check against 'while (0);'.  Rewrite the code to use a
goto instead.  This patch temporarily keeps an extra level of
indentation to highlight the change; the next patch cleans it up.
Signed-off-by: NEric Blake <eblake@redhat.com>
Message-Id: <20171201232433.25193-4-eblake@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

It is more typical to provide the ';' by the caller of a macro
than to embed it in the macro itself; this is because syntax
highlight engines can get confused if a macro is called without
a semicolon before the closing '}'.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20171201232433.25193-3-eblake@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

For a couple of macros in pcnet.c, we have to provide a new scope
to avoid compiler warnings about declarations in the middle of a
switch statement that aren't in a sub-scope.  But use of
'do { ... } while (0);' merely to provide that new scope is arcane
overkill, compared to just using '{ ... }'.
Signed-off-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Message-Id: <20171201232433.25193-2-eblake@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

entry is moved from list but is not freed.
Signed-off-by: Nlinzhecheng <linzhecheng@huawei.com>

Message-Id: <20171225024704.19540-1-linzhecheng@huawei.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Except for round-robin TCG, every other accelerator is using more or
less the same code around qemu_wait_io_event_common.  The exception
is HAX, which also has to eat the dummy APC that is queued by
qemu_cpu_kick_thread.

We can add the SleepEx call to qemu_wait_io_event under "if
(!tcg_enabled())", since that is the condition that is used in
qemu_cpu_kick_thread, and unify the function for KVM, HAX, HVF and
multi-threaded TCG.  Single-threaded TCG code can also be simplified
since it is only used in the round-robin, sleep-if-all-CPUs-idle case.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This patch adds saving and restoring of the icount warp
timers in the vmstate.
It is needed because there timers affect the virtual clock value.
Therefore determinism of the execution in icount record/replay mode
depends on determinism of the timers.
Signed-off-by: NPavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NPavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>

This introduces the qemu-gdb command "qemu timers" which will dump the
state of the main timers in the system.
Signed-off-by: NAlex Bennée <alex.bennee@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add a simple helper to dump lock state.
Signed-off-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This ensures that x86_cpu_dump_state shows registers with the correct
size.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

x86_update_hflags reference env->efer which is updated in hax_get_msrs,
so it has to be called after hax_get_msrs. This fix the bug that sometimes
dump_state show 32 bits regs even in 64 bits mode.
Signed-off-by: NTao Wu <lepton@google.com>
Message-Id: <20180110195056.85403-3-lepton@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Change to use x86_update_hflags instead of keeping another copy
at hax side. This also fix bug like HF_CPL_MASK should be SS.DPL,
not CS.DPL.
Signed-off-by: NTao Wu <lepton@google.com>
Message-Id: <20180110195056.85403-2-lepton@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

We will share the same code for hax/kvm.
Signed-off-by: NTao Wu <lepton@google.com>
Message-Id: <20180110195056.85403-1-lepton@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The raspi2 machine supports loading firmware images, so we can easily
load a small test sequence as raw binary blob here to test the UART.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Message-Id: <1512031988-32490-8-git-send-email-thuth@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Now that moxiesim supports the -bios parameter, we can check this machine
in the boot-serial tester, too, by supplying a mini bios that only writes
'T' characters to the UART.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Message-Id: <1512031988-32490-7-git-send-email-thuth@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This adds two simple TCG + UART tests for the microblaze boards,
one in big endian mode, and one in little endian mode.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Message-Id: <1512031988-32490-5-git-send-email-thuth@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

scsi_write_same_complete() can retry the write if the request was
unaligned.  Make sure to release the AioContext when that code path is
taken!

This patch fixes a hang when QEMU terminates after an unaligned WRITE
SAME request has been processed with dataplane.  The hang occurs because
iothread_stop_all() cannot acquire the AioContext lock that was leaked
by the IOThread in scsi_write_same_complete().

Fixes: b9e413dd ("block: explicitly acquire aiocontext in aio callbacks that need it").
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: qemu-stable@nongnu.org
Reported-by: NCong Li <coli@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20180104142502.15175-1-stefanha@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Spotted thanks to ASAN:

==25226==ERROR: AddressSanitizer: global-buffer-overflow on address 0x556715a1f120 at pc 0x556714b6f6b1 bp 0x7ffcdfac1360 sp 0x7ffcdfac1350
READ of size 1 at 0x556715a1f120 thread T0
    #0 0x556714b6f6b0 in init_disasm /home/elmarco/src/qemu/disas/s390.c:219
    #1 0x556714b6fa6a in print_insn_s390 /home/elmarco/src/qemu/disas/s390.c:294
    #2 0x55671484d031 in monitor_disas /home/elmarco/src/qemu/disas.c:635
    #3 0x556714862ec0 in memory_dump /home/elmarco/src/qemu/monitor.c:1324
    #4 0x55671486342a in hmp_memory_dump /home/elmarco/src/qemu/monitor.c:1418
    #5 0x5567148670be in handle_hmp_command /home/elmarco/src/qemu/monitor.c:3109
    #6 0x5567148674ed in qmp_human_monitor_command /home/elmarco/src/qemu/monitor.c:613
    #7 0x556714b00918 in qmp_marshal_human_monitor_command /home/elmarco/src/qemu/build/qmp-marshal.c:1704
    #8 0x556715138a3e in do_qmp_dispatch /home/elmarco/src/qemu/qapi/qmp-dispatch.c:104
    #9 0x556715138f83 in qmp_dispatch /home/elmarco/src/qemu/qapi/qmp-dispatch.c:131
    #10 0x55671485cf88 in handle_qmp_command /home/elmarco/src/qemu/monitor.c:3839
    #11 0x55671514e80b in json_message_process_token /home/elmarco/src/qemu/qobject/json-streamer.c:105
    #12 0x5567151bf2dc in json_lexer_feed_char /home/elmarco/src/qemu/qobject/json-lexer.c:323
    #13 0x5567151bf827 in json_lexer_feed /home/elmarco/src/qemu/qobject/json-lexer.c:373
    #14 0x55671514ee62 in json_message_parser_feed /home/elmarco/src/qemu/qobject/json-streamer.c:124
    #15 0x556714854b1f in monitor_qmp_read /home/elmarco/src/qemu/monitor.c:3881
    #16 0x556715045440 in qemu_chr_be_write_impl /home/elmarco/src/qemu/chardev/char.c:172
    #17 0x556715047184 in qemu_chr_be_write /home/elmarco/src/qemu/chardev/char.c:184
    #18 0x55671505a8e6 in tcp_chr_read /home/elmarco/src/qemu/chardev/char-socket.c:440
    #19 0x5567150943c3 in qio_channel_fd_source_dispatch /home/elmarco/src/qemu/io/channel-watch.c:84
    #20 0x7fb90292b90b in g_main_dispatch ../glib/gmain.c:3182
    #21 0x7fb90292c7ac in g_main_context_dispatch ../glib/gmain.c:3847
    #22 0x556715162eca in glib_pollfds_poll /home/elmarco/src/qemu/util/main-loop.c:214
    #23 0x556715163001 in os_host_main_loop_wait /home/elmarco/src/qemu/util/main-loop.c:261
    #24 0x5567151631fa in main_loop_wait /home/elmarco/src/qemu/util/main-loop.c:515
    #25 0x556714ad6d3b in main_loop /home/elmarco/src/qemu/vl.c:1950
    #26 0x556714ade329 in main /home/elmarco/src/qemu/vl.c:4865
    #27 0x7fb8fe5c9009 in __libc_start_main (/lib64/libc.so.6+0x21009)
    #28 0x5567147af4d9 in _start (/home/elmarco/src/qemu/build/s390x-softmmu/qemu-system-s390x+0xf674d9)

0x556715a1f120 is located 32 bytes to the left of global variable 'char_hci_type_info' defined in '/home/elmarco/src/qemu/hw/bt/hci-csr.c:493:23' (0x556715a1f140) of size 104
0x556715a1f120 is located 8 bytes to the right of global variable 's390_opcodes' defined in '/home/elmarco/src/qemu/disas/s390.c:860:33' (0x556715a15280) of size 40600

This fix is based on Andreas Arnez <arnez@linux.vnet.ibm.com> upstream
commit:
https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commitdiff;h=9ace48f3d7d80ce09c5df60cccb433470410b11b

2014-08-19  Andreas Arnez  <arnez@linux.vnet.ibm.com>

       * s390-dis.c (init_disasm): Simplify initialization of
       opc_index[].  This also fixes an access after the last element
       of s390_opcodes[].
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180104160523.22995-19-marcandre.lureau@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Spotted thanks to ASAN.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180104160523.22995-18-marcandre.lureau@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The coroutine is not finished by the time the test ends, resulting in
ASAN warning:

==7005==ERROR: LeakSanitizer: detected memory leaks

Direct leak of 312 byte(s) in 1 object(s) allocated from:
    #0 0x7fd35290fa38 in __interceptor_calloc (/lib64/libasan.so.4+0xdea38)
    #1 0x7fd3506c5f75 in g_malloc0 ../glib/gmem.c:124
    #2 0x55994af03e47 in qemu_coroutine_new /home/elmarco/src/qemu/util/coroutine-ucontext.c:144
    #3 0x55994aefed99 in qemu_coroutine_create /home/elmarco/src/qemu/util/qemu-coroutine.c:76
    #4 0x55994ac1eb50 in verify_entered_step_1 /home/elmarco/src/qemu/tests/test-coroutine.c:80
    #5 0x55994af03c75 in coroutine_trampoline /home/elmarco/src/qemu/util/coroutine-ucontext.c:119
    #6 0x7fd34ec02bef  (/lib64/libc.so.6+0x50bef)

Do not yield() to let the coroutine terminate.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20180104160523.22995-17-marcandre.lureau@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Direct leak of 913 byte(s) in 43 object(s) allocated from:
    #0 0x55880a15df60 in __interceptor_malloc (/home/elmarco/src/qq/build/tests/qmp-test+0x110f60)
    #1 0x7f3f20fd098f in _IO_vasprintf (/lib64/libc.so.6+0x8098f)
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180104160523.22995-15-marcandre.lureau@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Direct leak of 160 byte(s) in 4 object(s) allocated from:
    #0 0x55ed7678cda8 in calloc (/home/elmarco/src/qq/build/x86_64-softmmu/qemu-system-x86_64+0x797da8)
    #1 0x7f3f5e725f75 in g_malloc0 /home/elmarco/src/gnome/glib/builddir/../glib/gmem.c:124
    #2 0x55ed778aa3a7 in query_option_descs /home/elmarco/src/qq/util/qemu-config.c:60:16
    #3 0x55ed778aa307 in get_drive_infolist /home/elmarco/src/qq/util/qemu-config.c:140:19
    #4 0x55ed778a9f40 in qmp_query_command_line_options /home/elmarco/src/qq/util/qemu-config.c:254:36
    #5 0x55ed76d4868c in qmp_marshal_query_command_line_options /home/elmarco/src/qq/build/qmp-marshal.c:3078:14
    #6 0x55ed77855dd5 in do_qmp_dispatch /home/elmarco/src/qq/qapi/qmp-dispatch.c:104:5
    #7 0x55ed778558cc in qmp_dispatch /home/elmarco/src/qq/qapi/qmp-dispatch.c:131:11
    #8 0x55ed768b592f in handle_qmp_command /home/elmarco/src/qq/monitor.c:3840:11
    #9 0x55ed7786ccfe in json_message_process_token /home/elmarco/src/qq/qobject/json-streamer.c:105:5
    #10 0x55ed778fe37c in json_lexer_feed_char /home/elmarco/src/qq/qobject/json-lexer.c:323:13
    #11 0x55ed778fdde6 in json_lexer_feed /home/elmarco/src/qq/qobject/json-lexer.c:373:15
    #12 0x55ed7786cd83 in json_message_parser_feed /home/elmarco/src/qq/qobject/json-streamer.c:124:12
    #13 0x55ed768b559e in monitor_qmp_read /home/elmarco/src/qq/monitor.c:3882:5
    #14 0x55ed77714f29 in qemu_chr_be_write_impl /home/elmarco/src/qq/chardev/char.c:167:9
    #15 0x55ed77714fde in qemu_chr_be_write /home/elmarco/src/qq/chardev/char.c:179:9
    #16 0x55ed7772ffad in tcp_chr_read /home/elmarco/src/qq/chardev/char-socket.c:440:13
    #17 0x55ed7777113b in qio_channel_fd_source_dispatch /home/elmarco/src/qq/io/channel-watch.c:84:12
    #18 0x7f3f5e71d90b in g_main_dispatch /home/elmarco/src/gnome/glib/builddir/../glib/gmain.c:3182
    #19 0x7f3f5e71e7ac in g_main_context_dispatch /home/elmarco/src/gnome/glib/builddir/../glib/gmain.c:3847
    #20 0x55ed77886ffc in glib_pollfds_poll /home/elmarco/src/qq/util/main-loop.c:214:9
    #21 0x55ed778865fd in os_host_main_loop_wait /home/elmarco/src/qq/util/main-loop.c:261:5
    #22 0x55ed77886222 in main_loop_wait /home/elmarco/src/qq/util/main-loop.c:515:11
    #23 0x55ed76d2a4df in main_loop /home/elmarco/src/qq/vl.c:1995:9
    #24 0x55ed76d1cb4a in main /home/elmarco/src/qq/vl.c:4914:5
    #25 0x7f3f555f6039 in __libc_start_main (/lib64/libc.so.6+0x21039)
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <20180104160523.22995-14-marcandre.lureau@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

ASAN complains about:

==8856==ERROR: AddressSanitizer: stack-buffer-overflow on address 0x7ffd8a1fe168 at pc 0x561136cb4451 bp 0x7ffd8a1fe130 sp 0x7ffd8a1fd8e0
READ of size 16 at 0x7ffd8a1fe168 thread T0
    #0 0x561136cb4450 in __asan_memcpy (/home/elmarco/src/qq/build/tests/test-crypto-ivgen+0x110450)
    #1 0x561136d2a6a7 in qcrypto_ivgen_essiv_calculate /home/elmarco/src/qq/crypto/ivgen-essiv.c:83:5
    #2 0x561136d29af8 in qcrypto_ivgen_calculate /home/elmarco/src/qq/crypto/ivgen.c:72:12
    #3 0x561136d07c8e in test_ivgen /home/elmarco/src/qq/tests/test-crypto-ivgen.c:148:5
    #4 0x7f77772c3b04 in test_case_run /home/elmarco/src/gnome/glib/builddir/../glib/gtestutils.c:2237
    #5 0x7f77772c3ec4 in g_test_run_suite_internal /home/elmarco/src/gnome/glib/builddir/../glib/gtestutils.c:2321
    #6 0x7f77772c3f6d in g_test_run_suite_internal /home/elmarco/src/gnome/glib/builddir/../glib/gtestutils.c:2333
    #7 0x7f77772c3f6d in g_test_run_suite_internal /home/elmarco/src/gnome/glib/builddir/../glib/gtestutils.c:2333
    #8 0x7f77772c3f6d in g_test_run_suite_internal /home/elmarco/src/gnome/glib/builddir/../glib/gtestutils.c:2333
    #9 0x7f77772c4184 in g_test_run_suite /home/elmarco/src/gnome/glib/builddir/../glib/gtestutils.c:2408
    #10 0x7f77772c2e0d in g_test_run /home/elmarco/src/gnome/glib/builddir/../glib/gtestutils.c:1674
    #11 0x561136d0799b in main /home/elmarco/src/qq/tests/test-crypto-ivgen.c:173:12
    #12 0x7f77756e6039 in __libc_start_main (/lib64/libc.so.6+0x21039)
    #13 0x561136c13d89 in _start (/home/elmarco/src/qq/build/tests/test-crypto-ivgen+0x6fd89)

Address 0x7ffd8a1fe168 is located in stack of thread T0 at offset 40 in frame
    #0 0x561136d2a40f in qcrypto_ivgen_essiv_calculate /home/elmarco/src/qq/crypto/ivgen-essiv.c:76

  This frame has 1 object(s):
    [32, 40) 'sector.addr' <== Memory access at offset 40 overflows this variable
HINT: this may be a false positive if your program uses some custom stack unwind mechanism or swapcontext
      (longjmp and C++ exceptions *are* supported)
SUMMARY: AddressSanitizer: stack-buffer-overflow (/home/elmarco/src/qq/build/tests/test-crypto-ivgen+0x110450) in __asan_memcpy
Shadow bytes around the buggy address:
  0x100031437bd0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  0x100031437be0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  0x100031437bf0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  0x100031437c00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  0x100031437c10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
=>0x100031437c20: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00[f3]f3 f3
  0x100031437c30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  0x100031437c40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  0x100031437c50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  0x100031437c60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  0x100031437c70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Shadow byte legend (one shadow byte represents 8 application bytes):
  Addressable:           00
  Partially addressable: 01 02 03 04 05 06 07
  Heap left redzone:       fa
  Freed heap region:       fd
  Stack left redzone:      f1
  Stack mid redzone:       f2
  Stack right redzone:     f3
  Stack after return:      f5
  Stack use after scope:   f8
  Global redzone:          f9
  Global init order:       f6
  Poisoned by user:        f7
  Container overflow:      fc
  Array cookie:            ac
  Intra object redzone:    bb
  ASan internal:           fe
  Left alloca redzone:     ca
  Right alloca redzone:    cb

It looks like the rest of the code copes with ndata being larger than
sizeof(sector), so limit the memcpy() range.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>
Message-Id: <20180104160523.22995-13-marcandre.lureau@redhat.com>
Tested-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Direct leak of 12 byte(s) in 2 object(s) allocated from:
    #0 0x7f50d403c850 in malloc (/lib64/libasan.so.4+0xde850)
    #1 0x7f50d1ddf98f in vasprintf (/lib64/libc.so.6+0x8098f)
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180104160523.22995-12-marcandre.lureau@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Fixes leaks such as:

Direct leak of 2 byte(s) in 1 object(s) allocated from:
    #0 0x7eff58beb850 in malloc (/lib64/libasan.so.4+0xde850)
    #1 0x7eff57942f0c in g_malloc ../glib/gmem.c:94
    #2 0x7eff579431cf in g_malloc_n ../glib/gmem.c:331
    #3 0x7eff5795f6eb in g_strdup ../glib/gstrfuncs.c:363
    #4 0x55db720f1d46 in readline_hist_add /home/elmarco/src/qq/util/readline.c:258
    #5 0x55db720f2d34 in readline_handle_byte /home/elmarco/src/qq/util/readline.c:387
    #6 0x55db71539d00 in monitor_read /home/elmarco/src/qq/monitor.c:3896
    #7 0x55db71f9be35 in qemu_chr_be_write_impl /home/elmarco/src/qq/chardev/char.c:167
    #8 0x55db71f9bed3 in qemu_chr_be_write /home/elmarco/src/qq/chardev/char.c:179
    #9 0x55db71fa013c in fd_chr_read /home/elmarco/src/qq/chardev/char-fd.c:66
    #10 0x55db71fe18a8 in qio_channel_fd_source_dispatch /home/elmarco/src/qq/io/channel-watch.c:84
    #11 0x7eff5793a90b in g_main_dispatch ../glib/gmain.c:3182
    #12 0x7eff5793b7ac in g_main_context_dispatch ../glib/gmain.c:3847
    #13 0x55db720af3bd in glib_pollfds_poll /home/elmarco/src/qq/util/main-loop.c:214
    #14 0x55db720af505 in os_host_main_loop_wait /home/elmarco/src/qq/util/main-loop.c:261
    #15 0x55db720af6d6 in main_loop_wait /home/elmarco/src/qq/util/main-loop.c:515
    #16 0x55db7184e0de in main_loop /home/elmarco/src/qq/vl.c:1995
    #17 0x55db7185e956 in main /home/elmarco/src/qq/vl.c:4914
    #18 0x7eff4ea17039 in __libc_start_main (/lib64/libc.so.6+0x21039)

(while at it, use g_new0(ReadLineState), it's a bit easier to read)
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180104160523.22995-11-marcandre.lureau@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Note that data_dir[] will now point to allocated strings.

Fixes:
Direct leak of 16 byte(s) in 1 object(s) allocated from:
    #0 0x7f1448181850 in malloc (/lib64/libasan.so.4+0xde850)
    #1 0x7f1446ed8f0c in g_malloc ../glib/gmem.c:94
    #2 0x7f1446ed91cf in g_malloc_n ../glib/gmem.c:331
    #3 0x7f1446ef739a in g_strsplit ../glib/gstrfuncs.c:2364
    #4 0x55cf276439d7 in main /home/elmarco/src/qq/vl.c:4311
    #5 0x7f143dfad039 in __libc_start_main (/lib64/libc.so.6+0x21039)
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <20180104160523.22995-10-marcandre.lureau@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

/public/qobject_is_equal_conversion: OK

=================================================================
==14396==ERROR: LeakSanitizer: detected memory leaks

Direct leak of 56 byte(s) in 1 object(s) allocated from:
    #0 0x7f07682c5850 in malloc (/lib64/libasan.so.4+0xde850)
    #1 0x7f0767d12f0c in g_malloc ../glib/gmem.c:94
    #2 0x7f0767d131cf in g_malloc_n ../glib/gmem.c:331
    #3 0x562bd767371f in do_test_equality /home/elmarco/src/qq/tests/check-qobject.c:49
    #4 0x562bd7674a35 in qobject_is_equal_dict_test /home/elmarco/src/qq/tests/check-qobject.c:267
    #5 0x7f0767d37b04 in test_case_run ../glib/gtestutils.c:2237
    #6 0x7f0767d37ec4 in g_test_run_suite_internal ../glib/gtestutils.c:2321
    #7 0x7f0767d37f6d in g_test_run_suite_internal ../glib/gtestutils.c:2333
    #8 0x7f0767d38184 in g_test_run_suite ../glib/gtestutils.c:2408
    #9 0x7f0767d36e0d in g_test_run ../glib/gtestutils.c:1674
    #10 0x562bd7674e75 in main /home/elmarco/src/qq/tests/check-qobject.c:327
    #11 0x7f0766009039 in __libc_start_main (/lib64/libc.so.6+0x21039)
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180104160523.22995-9-marcandre.lureau@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add a new test with --enable-debug using clang/asan/ubsan, remove
--enable-debug from test-clang & test-mingw.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180104160523.22995-7-marcandre.lureau@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Build fedora image with ASAN/UBSan support.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180104160523.22995-6-marcandre.lureau@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When --enable-debug is turned on, configure doesn't set -O level, and
uses default compiler -O0 level, which is slow.

Instead, use -Og if supported by the compiler (optimize debugging
experience), or -O1 (keeps code somewhat debuggable and works around
compiler bugs).

Unfortunately, gcc has many false-positive maybe-uninitialized
errors with Og and O1 (f27 gcc 7.2.1 20170915):

/home/elmarco/src/qemu/hw/ipmi/isa_ipmi_kcs.c: In function ‘ipmi_kcs_ioport_read’:
/home/elmarco/src/qemu/hw/ipmi/isa_ipmi_kcs.c:279:12: error: ‘ret’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
     return ret;
            ^~~
cc1: all warnings being treated as errors
make: *** [/home/elmarco/src/qemu/rules.mak:66: hw/ipmi/isa_ipmi_kcs.o] Error 1
make: *** Waiting for unfinished jobs....
/home/elmarco/src/qemu/hw/ide/ahci.c: In function ‘ahci_populate_sglist’:
/home/elmarco/src/qemu/hw/ide/ahci.c:903:58: error: ‘tbl_entry_size’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
         if ((off_idx == -1) || (off_pos < 0) || (off_pos > tbl_entry_size)) {
                                                 ~~~~~~~~~^~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make: *** [/home/elmarco/src/qemu/rules.mak:66: hw/ide/ahci.o] Error 1
/home/elmarco/src/qemu/hw/display/qxl.c: In function ‘qxl_add_memslot’:
/home/elmarco/src/qemu/hw/display/qxl.c:1397:52: error: ‘pci_start’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
     memslot.virt_end   = virt_start + (guest_end   - pci_start);
                                       ~~~~~~~~~~~~~^~~~~~~~~~~~
/home/elmarco/src/qemu/hw/display/qxl.c:1389:9: error: ‘pci_region’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
         qxl_set_guest_bug(d, "%s: pci_region = %d", __func__, pci_region);
         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors

There seems to be a long list of related bugs in upstream GCC, some of
them are being fixed very recently:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=24639

For now, let's workaround it by using Wno-maybe-uninitialized (gcc-only).
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180104160523.22995-5-marcandre.lureau@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

$ make print-CFLAGS
CFLAGS=-fsanitize=address -Og -g

Trick from various sources:
https://stackoverflow.com/questions/16467718/how-to-print-out-a-variable-in-makefile
https://www.cmcrossroads.com/article/printing-value-makefile-variableSigned-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <20180104160523.22995-4-marcandre.lureau@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Move generic make flags in MAKEFLAGS (SUBDIR_MAKEFLAGS is more qemu specific).

Use --quiet to silence make 'is up to date' message.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-Id: <20180104160523.22995-3-marcandre.lureau@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When linking qemu-ga under some configuration (when gthread-2.0.pc
doesn't have -pthread, as happening atm with meson build), you may
have this linking issue:

/usr/bin/ld: libqemuutil.a(qemu-thread-posix.o): undefined reference to symbol 'pthread_setname_np@@GLIBC_2.12'
/usr/lib64/libpthread.so.0: error adding symbols: DSO missing from command line

Make sure qemu-ga links with the pthread library, by adding correct
flags to libs_qga.

This is really a QEMU bug, because it's QEMU code that's using pthread
functions, and so we must explicitly link against pthreads. The bug
was just masked by the fact that often some pkg-config or another for
one of our dependencies will add -pthread to the link line anyway.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-Id: <20180104160523.22995-2-marcandre.lureau@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

It's a replacement of g_timeout_add[_seconds]() for chardevs.  Chardevs
now can have dedicated gcontext, we should always bind chardev tasks
onto those gcontext rather than the default main context.  Since there
are quite a few of g_timeout_add[_seconds]() callers, a new function
qemu_chr_timeout_add_ms() is introduced.

One thing to mention is that, terminal3270 is still always running on
main gcontext.  However let's convert that as well since it's still part
of chardev codes and in case one day we'll miss that when we move it out
of main gcontext too.

Also, convert all the timers from GSource tags into GSource pointers.
Gsource tag IDs and g_source_remove()s can only work with default
gcontext, while now these GSources can logically be attached to other
contexts.  So let's use explicit g_source_destroy() plus another
g_source_unref() to remove a timer.

Note: when in the timer handler, we don't need the g_source_destroy()
any more since that'll be done automatically if the timer handler
returns false (and that's what all the current handlers do).

Yet another note: in pty_chr_rearm_timer() we take special care for
ms=1000.  This patch merged the two cases into one.
Signed-off-by: NPeter Xu <peterx@redhat.com>
Message-Id: <20180104141835.17987-4-peterx@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The idle task will be attached to main gcontext even if the chardev
backend is running in another gcontext.  Fix the only caller by
extending the g_idle_add() logic into the more powerful
g_source_attach().  It's basically g_idle_add_full() implementation, but
with the chardev's gcontext passed in.
Signed-off-by: NPeter Xu <peterx@redhat.com>
Message-Id: <20180104141835.17987-3-peterx@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

In commit 6bbb6c06 ("chardev: use per-dev context for
io_add_watch_poll", 2017-09-22) all the chardev watches are converted to
use per-chardev gcontext to support chardev to be run outside default
main thread.  However that's still missing one call from the frontend
code.  Touch that up.
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: NPeter Xu <peterx@redhat.com>
Message-Id: <20180104141835.17987-2-peterx@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Certain PMU-related MSRs are not supported for CPUs with PMU
architecture below version 2. KVM rejects any access to them (see
intel_is_valid_msr_idx routine in KVM), and QEMU fails on the following
assertion:

  kvm_put_msrs: Assertion `ret == cpu->kvm_msr_buf->nmsrs' failed.

QEMU also could fail if KVM exposes less fixed counters then 3. It could
happen if host system run inside another hypervisor, which is tweaking
PMU-related CPUID. To prevent possible fail, number of fixed counters now is
obtained in the same way as number of GP counters.
Reviewed-by: NRoman Kagan <rkagan@virtuozzo.com>
Signed-off-by: NJan Dakinevich <jan.dakinevich@virtuozzo.com>
Message-Id: <1514383466-7257-1-git-send-email-jan.dakinevich@virtuozzo.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

HPET saves its state by calculating the current time and recovers timer
offset using this calculated value. But these calculations include
divisions and multiplications. Therefore the timer state cannot be recovered
precise enough.
This patch introduces saving of the original value of the offset to
preserve the determinism of the timer.
Signed-off-by: NPavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: NMaria Klimushenkova <maria.klimushenkova@ispras.ru>
Reviewed-by: NJuan Quintela <quintela@redhat.com>

--
v3: Added compat property for correct migration.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When -no-acpi option is used with Q35 machine type, no guest ACPI is
built, but the ACPI device is still created, so only checking the
presence of ACPI device before memory plug/unplug is not enough in
such cases. Check whether ACPI is disabled globally in addition and
fail memory plug/unplug if it's disabled.
Signed-off-by: NHaozhong Zhang <haozhong.zhang@intel.com>
Message-Id: <20171222015120.31730-1-haozhong.zhang@intel.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

scsi_disk_emulate_command passes in_buf == NULL when sent a REQUEST
SENSE command.  Check for in_len == 0 before dereferencing in_buf.

Fixes: f68d98b2Reported-by: NRoman Kagan <rkagan@virtuozzo.com>
Tested-by: NRoman Kagan <rkagan@virtuozzo.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add the property to the device model, then parse it by calling
blkconf_apply_backend_options().

In addition to blk_set_perm(), the called function also handles error
options and wce. For error options we've already checked that the
default values are used, for wce we don't have the option either so it
is always the default (true). In other words there is no change of
behavior in these regards.
Signed-off-by: NFam Zheng <famz@redhat.com>
Message-Id: <20171205151553.7834-1-famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>