- 25 8月, 2017 1 次提交
-
-
由 Max Reitz 提交于
The bs->exact_filename field may not be sufficient to store the full blkdebug node filename. In this case, we should not generate a filename at all instead of an unusable one. Cc: qemu-stable@nongnu.org Reported-by: NQu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by: NMax Reitz <mreitz@redhat.com> Message-id: 20170613172006.19685-2-mreitz@redhat.com Reviewed-by: NAlberto Garcia <berto@igalia.com> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NMax Reitz <mreitz@redhat.com> (cherry picked from commit de81d72d) Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
-
- 04 8月, 2017 6 次提交
-
-
由 Eric Blake 提交于
Make it easier to simulate various unusual hardware setups (for example, recent commits 3482b9bc and b8d0a980 affect the Dell Equallogic iSCSI with its 15M preferred and maximum unmap and write zero sizing, or b2f95fee deals with the Linux loopback block device having a max_transfer of 64k), by allowing blkdebug to wrap any other device with further restrictions on various alignments. Signed-off-by: NEric Blake <eblake@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com> Message-id: 20170429191419.30051-9-eblake@redhat.com Signed-off-by: NMax Reitz <mreitz@redhat.com> (cherry picked from commit 430b26a8) * prereq for 81c219acSigned-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
-
由 Eric Blake 提交于
Rather than store into a local variable, then copy to the struct if the value is valid, then reporting errors otherwise, it is simpler to just store into the struct and report errors if the value is invalid. This however requires that the struct store a 64-bit number, rather than a narrower type. Likewise, setting a sane errno value in ret prior to the sequence of parsing and jumping to out: on error makes it easier for the next patch to add a chain of similar checks. Signed-off-by: NEric Blake <eblake@redhat.com> Message-id: 20170429191419.30051-8-eblake@redhat.com Reviewed-by: NMax Reitz <mreitz@redhat.com> Signed-off-by: NMax Reitz <mreitz@redhat.com> (cherry picked from commit 3dc834f8) * prereq for 81c219acSigned-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
-
由 Eric Blake 提交于
In order to test the effects of artificial geometry constraints on operations like write zero or discard, we first need blkdebug to manage these actions. It also allows us to inject errors on those operations, just like we can for read/write/flush. We can also test the contract promised by the block layer; namely, if a device has specified limits on alignment or maximum size, then those limits must be obeyed (for now, the blkdebug driver merely inherits limits from whatever it is wrapping, but the next patch will further enhance it to allow specific limit overrides). This patch intentionally refuses to service requests smaller than the requested alignments; this is because an upcoming patch adds a qemu-iotest to prove that the block layer is correctly handling fragmentation, but the test only works if there is a way to tell the difference at artificial alignment boundaries when blkdebug is using a larger-than-default alignment. If we let the blkdebug layer always defer to the underlying layer, which potentially has a smaller granularity, the iotest will be thwarted. Tested by setting up an NBD server with export 'foo', then invoking: $ ./qemu-io qemu-io> open -o driver=blkdebug blkdebug::nbd://localhost:10809/foo qemu-io> d 0 15M qemu-io> w -z 0 15M Pre-patch, the server never sees the discard (it was silently eaten by the block layer); post-patch it is passed across the wire. Likewise, pre-patch the write is always passed with NBD_WRITE (with 15M of zeroes on the wire), while post-patch it can utilize NBD_WRITE_ZEROES (for less traffic). Signed-off-by: NEric Blake <eblake@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com> Message-id: 20170429191419.30051-7-eblake@redhat.com Signed-off-by: NMax Reitz <mreitz@redhat.com> (cherry picked from commit 63188c24) * prereq for 81c219acSigned-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
-
由 Eric Blake 提交于
Rather than repeat the logic at each caller of checking if a Rule exists that warrants an error injection, fold that logic into inject_error(); and rename it to rule_check() for legibility. This will help the next patch, which adds two more callers that need to check rules for the potential of injecting errors. Signed-off-by: NEric Blake <eblake@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com> Message-id: 20170429191419.30051-6-eblake@redhat.com Signed-off-by: NMax Reitz <mreitz@redhat.com> (cherry picked from commit d157ed5f) * prereq for 81c219acSigned-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
-
由 Eric Blake 提交于
Commits 04ed95f4 and 1a62d0ac updated the block layer to auto-fragment any I/O to fit within device boundaries. Additionally, when using a minimum alignment of 4k, we want to ensure the block layer does proper read-modify-write rather than requesting I/O on a slice of a sector. Let's enforce that the contract is obeyed when using blkdebug. For now, blkdebug only allows alignment overrides, and just inherits other limits from whatever device it is wrapping, but a future patch will further enhance things. Signed-off-by: NEric Blake <eblake@redhat.com> Reviewed-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com> Message-id: 20170429191419.30051-5-eblake@redhat.com Signed-off-by: NMax Reitz <mreitz@redhat.com> (cherry picked from commit e0ef4395) * prereq for 81c219acSigned-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
-
由 Max Reitz 提交于
For one thing, this allows us to drop the error message generation from qemu-img.c and blockdev.c and instead have it unified in bdrv_truncate(). Signed-off-by: NMax Reitz <mreitz@redhat.com> Message-id: 20170328205129.15138-3-mreitz@redhat.com Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NMax Reitz <mreitz@redhat.com> (cherry picked from commit ed3d2ec9) * prereq for 698bdfa0Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
-
- 01 8月, 2017 3 次提交
-
-
由 Eric Blake 提交于
We now have macros in place to make it less verbose to add a scalar to QDict and QList, so use them. Patch created mechanically via: spatch --sp-file scripts/coccinelle/qobject.cocci \ --macro-file scripts/cocci-macro-file.h --dir . --in-place then touched up manually to fix a couple of '?:' back to original spacing, as well as avoiding a long line in monitor.c. Signed-off-by: NEric Blake <eblake@redhat.com> Reviewed-by: NMarkus Armbruster <armbru@redhat.com> Message-Id: <20170427215821.19397-7-eblake@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Reviewed-by: NAlberto Garcia <berto@igalia.com> Signed-off-by: NMarkus Armbruster <armbru@redhat.com> (cherry picked from commit 46f5ac20) * prereq for fc0932fdSigned-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
-
由 Eric Blake 提交于
We have macros in place to make it less verbose to add a subtype of QObject to both QDict and QList. While we have made cleanups like this in the past (see commit fcfcd8ff, for example), having it be automated by Coccinelle makes it easier to maintain. Patch created mechanically via: spatch --sp-file scripts/coccinelle/qobject.cocci \ --macro-file scripts/cocci-macro-file.h --dir . --in-place then I verified that no manual touchups were required. Signed-off-by: NEric Blake <eblake@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Reviewed-by: NAlberto Garcia <berto@igalia.com> Reviewed-by: NMarkus Armbruster <armbru@redhat.com> Message-Id: <20170427215821.19397-5-eblake@redhat.com> Signed-off-by: NMarkus Armbruster <armbru@redhat.com> (cherry picked from commit de6e7951) Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
-
由 Max Reitz 提交于
The block layer takes care of removing the bs->file child if the block driver's bdrv_open()/bdrv_file_open() implementation fails. The block driver therefore does not need to do so, and indeed should not unless it sets bs->file to NULL afterwards -- because if this is not done, the bdrv_unref_child() in bdrv_open_inherit() will dereference the freed memory block at bs->file afterwards, which is not good. We can now decide whether to add a "bs->file = NULL;" after each of the offending bdrv_unref_child() invocations, or just drop them altogether. The latter is simpler, so let's do that. Cc: qemu-stable <qemu-stable@nongnu.org> Signed-off-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com> (cherry picked from commit de234897) Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
-
- 01 3月, 2017 1 次提交
-
-
由 Kevin Wolf 提交于
All callers will have to request permissions for all of their child nodes. Block drivers that act as simply filters can use the default implementation of .bdrv_child_perm(). Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com> Acked-by: NFam Zheng <famz@redhat.com>
-
- 24 2月, 2017 1 次提交
-
-
由 Kevin Wolf 提交于
Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com>
-
- 21 2月, 2017 1 次提交
-
-
由 Paolo Bonzini 提交于
Keep the coroutine on the same AioContext. Without this change, there would be a race between yielding the coroutine and reentering it. While the race cannot happen now, because the code only runs from a single AioContext, this will change with multiqueue support in the block layer. While doing the change, replace custom bottom half with aio_co_schedule. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NFam Zheng <famz@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Reviewed-by: NDaniel P. Berrange <berrange@redhat.com> Message-id: 20170213135235.12274-10-pbonzini@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
- 09 1月, 2017 1 次提交
-
-
由 Kevin Wolf 提交于
This enables byte granularity requests for blkdebug, and at the same time gets us rid of another user of the BDS-level AIO emulation. Note that unless align=512 is specified, this can behave subtly different from the old behaviour because bdrv_co_preadv/pwritev don't have to perform alignment adjustments any more. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com>
-
- 07 10月, 2016 1 次提交
-
-
由 Paolo Bonzini 提交于
This simplifies bottom half handlers by removing calls to qemu_bh_delete and thus removing the need to stash the bottom half pointer in the opaque datum. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 15 8月, 2016 1 次提交
-
-
由 Max Reitz 提交于
Store the configuration file's filename so it can later be used in bdrv_refresh_filename() without having to directly access the options QDict which may contain a value of a non-string type. Signed-off-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NJeff Cody <jcody@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 13 7月, 2016 1 次提交
-
-
由 Paolo Bonzini 提交于
In practice the entry argument is always known at creation time, and it is confusing that sometimes qemu_coroutine_enter is used with a non-NULL argument to re-enter a coroutine (this happens in block/sheepdog.c and tests/test-coroutine.c). So pass the opaque value at creation time, for consistency with e.g. aio_bh_new. Mostly done with the following semantic patch: @ entry1 @ expression entry, arg, co; @@ - co = qemu_coroutine_create(entry); + co = qemu_coroutine_create(entry, arg); ... - qemu_coroutine_enter(co, arg); + qemu_coroutine_enter(co); @ entry2 @ expression entry, arg; identifier co; @@ - Coroutine *co = qemu_coroutine_create(entry); + Coroutine *co = qemu_coroutine_create(entry, arg); ... - qemu_coroutine_enter(co, arg); + qemu_coroutine_enter(co); @ entry3 @ expression entry, arg; @@ - qemu_coroutine_enter(qemu_coroutine_create(entry), arg); + qemu_coroutine_enter(qemu_coroutine_create(entry, arg)); @ reentry @ expression co; @@ - qemu_coroutine_enter(co, NULL); + qemu_coroutine_enter(co); except for the aforementioned few places where the semantic patch stumbled (as expected) and for test_co_queue, which would otherwise produce an uninitialized variable warning. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Reviewed-by: NFam Zheng <famz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 05 7月, 2016 4 次提交
-
-
由 Kevin Wolf 提交于
Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com> Acked-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Kevin Wolf 提交于
Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com> Acked-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Eric Blake 提交于
It makes more sense to have ALL block size limit constraints in the same struct. Improve the documentation while at it. Simplify a couple of conditionals, now that we have audited and documented that request_alignment is always non-zero. Signed-off-by: NEric Blake <eblake@redhat.com> Reviewed-by: NFam Zheng <famz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Eric Blake 提交于
We want to eventually stick request_alignment alongside other BlockLimits, but first, we must ensure it is populated at the same time as all other limits, rather than being a special case that is set only when a block is first opened. Note that when the user does not provide "align", then we were defaulting to bs->request_alignment - but at this stage in the initialization, that was always 512. We were also rejecting an explicit "align":0 from the user; this patch now allows that, as an explicit request for the default alignment (which may not always be 512 in the future). qemu-iotests 77 is particularly sensitive to the fact that we can specify an artificial alignment override in blkdebug, and that override must continue to work even when limits are refreshed on an already open device. Signed-off-by: NEric Blake <eblake@redhat.com> Reviewed-by: NFam Zheng <famz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 23 3月, 2016 2 次提交
-
-
由 Veronia Bahaa 提交于
Move declarations out of qemu-common.h for functions declared in utils/ files: e.g. include/qemu/path.h for utils/path.c. Move inline functions out of qemu-common.h and into new files (e.g. include/qemu/bcd.h) Signed-off-by: NVeronia Bahaa <veroniabahaa@gmail.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Markus Armbruster 提交于
Commit 57cb38b3 included qapi/error.h into qemu/osdep.h to get the Error typedef. Since then, we've moved to include qemu/osdep.h everywhere. Its file comment explains: "To avoid getting into possible circular include dependencies, this file should not include any other QEMU headers, with the exceptions of config-host.h, compiler.h, os-posix.h and os-win32.h, all of which are doing a similar job to this file and are under similar constraints." qapi/error.h doesn't do a similar job, and it doesn't adhere to similar constraints: it includes qapi-types.h. That's in excess of 100KiB of crap most .c files don't actually need. Add the typedef to qemu/typedefs.h, and include that instead of qapi/error.h. Include qapi/error.h in .c files that need it and don't get it now. Include qapi-types.h in qom/object.h for uint16List. Update scripts/clean-includes accordingly. Update it further to match reality: replace config.h by config-target.h, add sysemu/os-posix.h, sysemu/os-win32.h. Update the list of includes in the qemu/osdep.h comment quoted above similarly. This reduces the number of objects depending on qapi/error.h from "all of them" to less than a third. Unfortunately, the number depending on qapi-types.h shrinks only a little. More work is needed for that one. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> [Fix compilation without the spice devel packages. - Paolo] Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 20 1月, 2016 1 次提交
-
-
由 Peter Maydell 提交于
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 18 12月, 2015 2 次提交
-
-
由 Kevin Wolf 提交于
Just reopening the children (as block.c does now) is enough. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NAlberto Garcia <berto@igalia.com>
-
由 Kevin Wolf 提交于
In order to decide whether a blkdebug: filename can be produced or a json: one is necessary, blkdebug checked whether bs->options had more options than just "config", "x-image" or "image" (the latter including nested options). That doesn't work well when generic block layer options are present. This patch passes an option QDict to the driver that contains only driver-specific options, i.e. the options for the general block layer as well as child nodes are already filtered out. Works much better this way. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NAlberto Garcia <berto@igalia.com>
-
- 17 12月, 2015 2 次提交
-
-
由 Eric Blake 提交于
Now that we guarantee the user doesn't have any enum values beginning with a single underscore, we can use that for our own purposes. Renaming ENUM_MAX to ENUM__MAX makes it obvious that the sentinel is generated. This patch was mostly generated by applying a temporary patch: |diff --git a/scripts/qapi.py b/scripts/qapi.py |index e6d014b..b862ec9 100644 |--- a/scripts/qapi.py |+++ b/scripts/qapi.py |@@ -1570,6 +1570,7 @@ const char *const %(c_name)s_lookup[] = { | max_index = c_enum_const(name, 'MAX', prefix) | ret += mcgen(''' | [%(max_index)s] = NULL, |+// %(max_index)s | }; | ''', | max_index=max_index) then running: $ cat qapi-{types,event}.c tests/test-qapi-types.c | sed -n 's,^// \(.*\)MAX,s|\1MAX|\1_MAX|g,p' > list $ git grep -l _MAX | xargs sed -i -f list The only things not generated are the changes in scripts/qapi.py. Rejecting enum members named 'MAX' is now useless, and will be dropped in the next patch. Signed-off-by: NEric Blake <eblake@redhat.com> Message-Id: <1447836791-369-23-git-send-email-eblake@redhat.com> Reviewed-by: NJuan Quintela <quintela@redhat.com> [Rebased to current master, commit message tweaked] Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
-
由 Eric Blake 提交于
No need to keep two separate enums, where editing one is likely to forget the other. Now that we can specify a qapi enum prefix, we don't even have to change the bulk of the uses. get_event_by_name() could perhaps be replaced by qapi_enum_parse(), but I left that for another day. CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: NEric Blake <eblake@redhat.com> Message-Id: <1447836791-369-20-git-send-email-eblake@redhat.com> Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
-
- 02 12月, 2015 1 次提交
-
-
由 Michael S. Tsirkin 提交于
make check always outputs warnings, this is not nice. Disable blkdebug warnings under qtest. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Message-id: 1448883874-17933-1-git-send-email-mst@redhat.com Signed-off-by: NMax Reitz <mreitz@redhat.com>
-
- 16 10月, 2015 2 次提交
-
-
由 Fam Zheng 提交于
The word "backing file" nowadays refers to the backing_hd in the external snapshot sense (i.e. bs->backing_hd), instead of the file sense (bs->file). Correct the comment to use the right term. Signed-off-by: NFam Zheng <famz@redhat.com> Reviewed-by: NAlberto Garcia <berto@igalia.com> Reviewed-by: NEric Blake <eblake@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Kevin Wolf 提交于
This patch removes the temporary duplication between bs->file and bs->file_child by converting everything to BdrvChild. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NAlberto Garcia <berto@igalia.com> Reviewed-by: NFam Zheng <famz@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
-
- 12 6月, 2015 1 次提交
-
-
由 Kevin Wolf 提交于
Instead of letting every caller of bdrv_open() determine the right flags for its child node manually and pass them to the function, pass the parent node and the role of the newly opened child (like backing file, protocol layer, etc.). Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com>
-
- 09 6月, 2015 3 次提交
-
-
由 Markus Armbruster 提交于
Cc: Kevin Wolf <kwolf@redhat.com> Cc: qemu-block@nongnu.org Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Acked-by: NKevin Wolf <kwolf@redhat.com>
-
由 Markus Armbruster 提交于
Retain the function value for now, to permit selective conversion of its callers. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Acked-by: NKevin Wolf <kwolf@redhat.com>
-
由 Markus Armbruster 提交于
When the argument is non-zero, qemu_opts_foreach() stops on callback returning non-zero, and returns that value. When the argument is zero, it doesn't stop, and returns the bit-wise inclusive or of all the return values. Funky :) The callers that pass zero could just as well pass one, because their callbacks can't return anything but zero: * qemu_add_globals()'s callback qdev_add_one_global() * qemu_config_write()'s callback config_write_opts() * main()'s callbacks default_driver_check(), drive_enable_snapshot(), vnc_init_func() Drop the parameter, and always stop. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Acked-by: NKevin Wolf <kwolf@redhat.com>
-
- 28 4月, 2015 1 次提交
-
-
由 Kevin Wolf 提交于
This is, amongst others, required for qemu-iotests 033 to run as intended on VHDX, which uses explicit bdrv_truncate() calls to bs->file when allocating new blocks. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NJeff Cody <jcody@redhat.com>
-
- 10 3月, 2015 1 次提交
-
-
由 John Snow 提交于
Background: The blkdebug scripts are currently engineered so that when a debug event occurs, a prefilter browses a master list of parsed rules for a certain event and adds them to an "active list" of rules to be used for the forthcoming action, provided the events and state numbers match. Then, once the request is received, the last active rule is used to inject an error if certain parameters match. This active list is cleared every time the prefilter injects a new rule for the first time during a debug event. The "once" rule currently causes the error injection, if it is triggered, to only clear the active list. This is insufficient for preventing future injections of the same rule. Remedy: This patch /deletes/ the rule from the list that the prefilter browses, so it is gone for good. In V2, we remove only the rule of interest from the active list instead of allowing the "once" rule to clear the entire list of active rules. Impact: This affects iotests 026. Several ENOSPC tests that used "once" can be seen to have output that shows multiple failure messages. After this patch, the error messages tend to be smaller and less severe, but the injection can still be seen to be working. I have patched the expected output to expect the smaller error messages. Signed-off-by: NJohn Snow <jsnow@redhat.com> Message-id: 1423257977-25630-1-git-send-email-jsnow@redhat.com Reviewed-by: NMax Reitz <mreitz@redhat.com> Signed-off-by: NMax Reitz <mreitz@redhat.com> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 10 12月, 2014 1 次提交
-
-
由 Max Reitz 提交于
Instead of actually recreating the options from scratch, just reuse the options given for creating the BDS, which are the configuration file name and additional options. In case there are no additional options we can thus create a plain filename. This obviously results in a different output for qemu-iotest 099 which exactly tests this filename generation. Fix it up as well. Signed-off-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Message-id: 1415697825-26678-2-git-send-email-mreitz@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 03 11月, 2014 1 次提交
-
-
由 Max Reitz 提交于
bdrv_make_empty() is currently only called if the current image represents an external snapshot that has been committed to its base image; it is therefore unlikely to have internal snapshots. In this case, bdrv_make_empty() can be greatly sped up by emptying the L1 and refcount table (while having the dirty flag set, which only works for compat=1.1) and creating a trivial refcount structure. If there are snapshots or for compat=0.10, fall back to the simple implementation (discard all clusters). [Applied s/clusters/cluster/ typo fix suggested by Eric Blake --Stefan] Signed-off-by: NMax Reitz <mreitz@redhat.com> Reviewed-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com> Message-id: 1414159063-25977-4-git-send-email-mreitz@redhat.com Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
- 20 10月, 2014 1 次提交
-
-
由 Markus Armbruster 提交于
I'll use it with block backends shortly, and the name is going to fit badly there. It's a block layer thing anyway, not just a block driver thing. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Reviewed-by: NMax Reitz <mreitz@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-