- 29 7月, 2013 7 次提交
-
-
由 Paul Burton 提交于
This preserves the final sector of the pflash which is used by YAMON to hold environment variables. If the endianness of the environment data is swapped then YAMON will fail to load environment variables from pflash. Signed-off-by: NPaul Burton <paul.burton@imgtec.com> Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Paul Burton 提交于
The SPD EEPROM specifies the amount of memory present in the system and thus its correct contents can only be known at runtime. Calculating parts of the data on init allows the data to accurately reflect the amount of target memory present and allow YAMON to boot with an arbitrary amount of SDRAM. Where possible the SPD data will favor indicating 2 banks of SDRAM rather than 1. For example the default 128MB of target memory will be represented as 2x64MB banks rather than 1x128MB bank. This allows versions of MIPS BIOS code (such as YAMON 2.22 and older) to boot despite a bug preventing them from handling a single bank of SDRAM with the Galileo GT64120 system controller emulated by QEMU. Signed-off-by: NPaul Burton <paul.burton@imgtec.com> Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Paul Burton 提交于
Rather than modifying the BIOS code at its original location, copy it for the 0x1fc00000 region & modify the copy. This means the original ROM code is correctly readable at 0x1e000010 whilst the MIPS revision is readable at 0x1fc00010. Additionally the code previously operated on target memory which would later be overwritten by the BIOS image upon CPU reset if the -bios argument was used to specify the BIOS image. This led to the written MIPS revision being lost. Copying using rom_copy when -bios is used fixes this issue. Signed-off-by: NPaul Burton <paul.burton@imgtec.com> Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Paul Burton 提交于
If the target is little endian (mipsel) then the BIOS image endianness is swapped so that the big endian BIOS binaries commonly produced can be loaded correctly. When using the -bios argument the BIOS is loaded using load_image_targphys, however this doesn't perform the load to target memory immediately. Instead it loads the BIOS file into a struct Rom which will later be written to target memory upon reset. However the endianness conversion was being performed before this, on init, and operating on the target memory which at this point is blank & will later be overwritten by the (big endian) BIOS image. Correct this by operating on the data referenced by struct Rom rather than the target memory when the -bios argument is used. Signed-off-by: NPaul Burton <paul.burton@imgtec.com> Signed-off-by: NLeon Alrae <leon.alrae@imgtec.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Andreas Färber 提交于
Signed-off-by: NAndreas Färber <afaerber@suse.de> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 James Hogan 提交于
When a branch delay slot contains another branch instruction, the code generated raises an exception, however since is_branch==1, handle_delay_slot() doesn't get called immediately. This means ctx->bstate isn't set to BS_BRANCH, and the decoder continues decoding until a non-branch instruction is found. If the first branch was a branch likely instruction then each instruction after it generates code for the unlikely case, to go to the next tb starting after the delay slot. This results in multiple goto_tb tcg ops being generated with the same exit number. When debug is enabled this hits: tcg-op.h:2589: tcg_gen_goto_tb: Assertion `(tcg_ctx.goto_tb_issue_mask & (1 << idx)) == 0' failed. This is fixed by removing is_branch entirely, and calling handle_delay_slot() if (ctx.hflags & MIPS_HFLAG_BMASK) was set prior to the current instruction being decoded. This still prevents handle_delay_slot() being called immediately after a branch but allows it to still be called after a branch within a delay slot. Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Signed-off-by: NYongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Petar Jovanovic 提交于
Multiplication of Q15 fractional halfword vectors was incorrect in the previous implementation of mipsdsp_rndq15_mul_q15_q15. It failed to take element signs into account. This change fixes it, and it adds a test case for it. The change also removes unnecessary cast in the function mipsdsp_mul_q15_q15_overflowflag21(). Signed-off-by: NPetar Jovanovic <petar.jovanovic@imgtec.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
- 27 7月, 2013 33 次提交
-
-
由 Anthony Liguori 提交于
QOM CPUState refactorings * Fix cpu_memory_rw_debug() breakage in s390x KVM * Replace final CPUArchState in sysemu/kvm.h * Introduce model subclasses for XtensaCPU * Introduce CPUClass::gdb_num[_core]_regs * Introduce CPUClass::gdb_core_xml_file * Introduce CPUClass::gdb_{read,write}_register() * Propagate CPUState further in gdbstub # gpg: Signature made Fri 26 Jul 2013 05:04:28 PM CDT using RSA key ID 3E7E013F # gpg: Can't check signature: public key not found # By Andreas Färber (23) and others # Via Andreas Färber * afaerber/tags/qom-cpu-for-anthony: (25 commits) cpu: Introduce CPUClass::gdb_core_xml_file for GDB_CORE_XML target-cris: Factor out CPUClass::gdb_read_register() hook for v10 cpu: Introduce CPUClass::gdb_{read,write}_register() gdbstub: Replace GET_REG*() macros with gdb_get_reg*() functions target-xtensa: Move cpu_gdb_{read,write}_register() target-lm32: Move cpu_gdb_{read,write}_register() target-s390x: Move cpu_gdb_{read,write}_register() target-alpha: Move cpu_gdb_{read,write}_register() target-cris: Move cpu_gdb_{read,write}_register() target-microblaze: Move cpu_gdb_{read,write}_register() target-sh4: Move cpu_gdb_{read,write}_register() target-openrisc: Move cpu_gdb_{read,write}_register() target-mips: Move cpu_gdb_{read,write}_register() target-m68k: Move cpu_gdb_{read,write}_register() target-arm: Move cpu_gdb_{read,write}_register() target-sparc: Move cpu_gdb_{read,write}_register() target-ppc: Move cpu_gdb_{read,write}_register() target-i386: Move cpu_gdb_{read,write}_register() cpu: Introduce CPUState::gdb_num_regs and CPUClass::gdb_num_core_regs gdbstub: Drop dead code in cpu_gdb_{read,write}_register() ...
-
由 Andreas Färber 提交于
Replace the GDB_CORE_XML define in gdbstub.c with a CPUClass field. Use first_cpu for qSupported and qXfer:features:read: for now. Add a stub for xml_builtin. Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
由 Andreas Färber 提交于
Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
由 Andreas Färber 提交于
Completes migration of target-specific code to new target-*/gdbstub.c. Acked-by: Michael Walle <michael@walle.cc> (for lm32) Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa) Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
由 Andreas Färber 提交于
This avoids polluting the global namespace with a non-prefixed macro and makes it obvious in the call sites that we return. Semi-automatic conversion using, e.g., sed -i 's/GET_REGL(/return gdb_get_regl(mem_buf, /g' target-*/gdbstub.c followed by manual tweaking for sparc's GET_REGA() and Coding Style. Acked-by: Michael Walle <michael@walle.cc> (for lm32) Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa) Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
由 Andreas Färber 提交于
Acked-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
由 Andreas Färber 提交于
Acked-by: NMichael Walle <michael@walle.cc> Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
由 Andreas Färber 提交于
Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
由 Andreas Färber 提交于
Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
由 Andreas Färber 提交于
Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
由 Andreas Färber 提交于
Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
由 Andreas Färber 提交于
Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
由 Andreas Färber 提交于
Reviewed-by: NJia Liu <proljc@gmail.com> Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
由 Mark Cave-Ayland 提交于
Currently the graphics resolution for TCX is fixed at 1024x768, however other framebuffers are capable of supporting additional resolutions. Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk> CC: Anthony Liguori <aliguori@us.ibm.com> CC: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
# By Kevin Wolf (16) and Ian Main (2) # Via Kevin Wolf * kwolf/for-anthony: Add tests for sync modes 'TOP' and 'NONE' Implement sync modes for drive-backup. Implement qdict_flatten() blockdev: Split up 'cache' option blockdev: Rename 'readonly' option to 'read-only' qcow2: Use dashes instead of underscores in options blockdev: Rename I/O throttling options for QMP QemuOpts: Add qemu_opt_unset() block: Allow "driver" option on the top level qapi: Anonymous unions qapi.py: Maintain a list of union types qapi: Add consume argument to qmp_input_get_object() qapi: Flat unions with arbitrary discriminator qapi: Add visitor for implicit structs docs: Document QAPI union types qapi-visit.py: Implement 'base' for unions qapi-visit.py: Split off generate_visit_struct_fields() qapi-types.py: Implement 'base' for unions Message-id: 1374870032-31672-1-git-send-email-kwolf@redhat.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Eduardo Otubo 提交于
v3 update: - reincluding getrlimit(), it is used by Xen. v2 update: - reincluding setrlimit(), it is used by Xen. Signed-off-by: NEduardo Otubo <otubo@linux.vnet.ibm.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Message-id: 1374518017-10424-3-git-send-email-otubo@linux.vnet.ibm.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Eduardo Otubo 提交于
v2 update: - set libseccomp 2.1.0 as requirement on configure script. Since libseccomp 2.0 there's no need to check the architecture type anymore. Signed-off-by: NEduardo Otubo <otubo@linux.vnet.ibm.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Message-id: 1374518017-10424-2-git-send-email-otubo@linux.vnet.ibm.com Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
由 Andreas Färber 提交于
Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
由 Andreas Färber 提交于
Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
由 Andreas Färber 提交于
Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
由 Andreas Färber 提交于
Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
由 Andreas Färber 提交于
Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
由 Andreas Färber 提交于
CPUState::gdb_num_regs replaces num_g_regs. CPUClass::gdb_num_core_regs replaces NUM_CORE_REGS. Allows building gdb_register_coprocessor() for xtensa, too. As a side effect this should fix coprocessor register numbering for SMP. Acked-by: Michael Walle <michael@walle.cc> (for lm32) Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa) Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
由 Andreas Färber 提交于
GET_REG*() macros include a return statement, thus no need for break. Acked-by: Michael Walle <michael@walle.cc> (for lm32) Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
由 Andreas Färber 提交于
Add braces, replace tabs, remove trailing whitespace, drop space before parenthesis and place break etc. below case statements. Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
由 Andreas Färber 提交于
Register a CPU type per core registered. Save the XtensaConfig in XtensaCPUClass and copy it from there to CPUXtensaState, to avoid touching every env->config access for now. Prepares for storing per-class GDB register count. Acked-by: NMax Filippov <jcmvbkbc@gmail.com> Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
由 Christian Borntraeger 提交于
Commit f17ec444 exec: Change cpu_memory_rw_debug() argument to CPUState missed to update s390x KVM code, breaking the build. Let's fix it up. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
由 Stefan Weil 提交于
Passing a CPUState pointer instead of a CPUArchState pointer eliminates the last target dependent data type in sysemu/kvm.h. It also simplifies the code. Signed-off-by: NStefan Weil <sw@weilnetz.de> Acked-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
由 Andreas Färber 提交于
This fixes a mismerge in 874ec3c5. Acked-by: NRiku Voipio <riku.voipio@iki.fi> Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
由 Ian Main 提交于
This patch adds tests for sync modes top and none. Test for 'TOP' is separated out as it requires a backing file. Also added a test for invalid format. Signed-off-by: NIan Main <imain@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Ian Main 提交于
This patch adds sync-modes to the drive-backup interface and implements the FULL, NONE and TOP modes of synchronization. FULL performs as before copying the entire contents of the drive while preserving the point-in-time using CoW. NONE only copies new writes to the target drive. TOP copies changes to the topmost drive image and preserves the point-in-time using CoW. For sync mode TOP are creating a new target image using the same backing file as the original disk image. Then any new data that has been laid on top of it since creation is copied in the main backup_run() loop. There is an extra check in the 'TOP' case so that we don't bother to copy all the data of the backing file as it already exists in the target. This is where the bdrv_co_is_allocated() is used to determine if the data exists in the topmost layer or below. Also any new data being written is intercepted via the write_notifier hook which ends up calling backup_do_cow() to copy old data out before it gets overwritten. For mode 'NONE' we create the new target image and only copy in the original data from the disk image starting from the time the call was made. This preserves the point in time data by only copying the parts that are *going to change* to the target image. This way we can reconstruct the final image by checking to see if the given block exists in the new target image first, and if it does not, you can get it from the original image. This is basically an optimization allowing you to do point-in-time snapshots with low overhead vs the 'FULL' version. Since there is no old data to copy out the loop in backup_run() for the NONE case just calls qemu_coroutine_yield() which only wakes up after an event (usually cancel in this case). The rest is handled by the before_write notifier which again calls backup_do_cow() to write out the old data so it can be preserved. Signed-off-by: NIan Main <imain@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Kevin Wolf 提交于
qdict_flatten(): For each nested QDict with key x, all fields with key y are moved to this QDict and their key is renamed to "x.y". This operation is applied recursively for nested QDicts. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com>
-