A pending vmstop request is also a reason to leave the inner main loop.
So far we ignored it, and pending stop requests issued over VCPU threads
were simply ignored.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

If some I/O operation ends up calling qemu_system_reset_request in VCPU
context, we record this and inform the io-thread, but we do not
terminate the VCPU loop. This can lead to fairly unexpected behavior if
the triggering reset operation is supposed to work synchronously.

Fix this for TCG (when run in deterministic I/O mode) by setting the
VCPU on stop and issuing a cpu_exit. KVM requires some more work on its
VCPU loop.

[ ported from qemu-kvm ]
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

If we call qemu_cpu_kick more than once before the target was able to
process the signal, pthread_kill will fail, and qemu will abort. Prevent
this by avoiding the redundant signal.

This logic can be found in qemu-kvm as well.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Initialize the field queue_size, dropped by
91c9e091.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Ignore failure with hpet device creation.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Compile vmmouse in hwlib. Ignore failure if vmmouse device can't be
created.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Convert to qdev, also add a proper reset function.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Allow failure with vmware_vga device creation and use standard
VGA instead.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Turn vmsvga_init into an inline function.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

1) Move GPIO-related functionality to qdev. Now one can use directly
qdev_get_gpio_in()/qdev_connect_gpio_out() on max7310 devices.

2) Make reset to be called through qdev.reset callback.
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

Seceral files contained onnecessary dependencies on hw/pxa.h header.
Drop unused references.
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

These two fields were added as a part of ARMv7 support patch (back in
2007), were never used by any code, so can be dropped.
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

Remove a stray #include <stdio.h> from the middle of neon_helper.c:
it was harmless but pointless since we include stdio.h at the top
of the file anyway.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Add uses of the float32/float64 boxing and unboxing macros so that
the ARM linux-user targets will compile with USE_SOFTFLOAT_STRUCT_TYPES
enabled.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Make softfloat compile with USE_SOFTFLOAT_STRUCT_TYPES defined, by
adding and using new macros const_float16(), const_float32() and
const_float64() so you can use array initializers in an array of
float16/float32/float64 whether the types are bare or wrapped in the
structs.

[aurelien@aurel32.net: do the same for float16]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The Neon half-precision conversion operations (VCVT.F16.F32 and
VCVT.F32.F16) use ARM standard floating-point arithmetic, unlike
the VFP versions (VCVTB and VCVTT).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Silence the NaNs that may result from half-precision conversion,
as we do for the other conversions.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Correctly handle NaNs in float16_to_float32(), by defining and
using a float16ToCommonNaN() function, as we do with the other formats.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Fix various bugs in the single-to-half-precision conversion code:
 * input NaNs not correctly converted in IEEE mode
   (fixed by defining and using a commonNaNToFloat16())
 * wrong values returned when converting NaN/Inf into non-IEEE
   half precision value
 * wrong values returned for conversion of values which are
   on the boundary between denormal and zero for the half
   precision format
 * zeroes not correctly identified
 * excessively large results in non-IEEE mode should
   generate InvalidOp, not Overflow
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Honour the default_nan_mode flag when doing conversions between
different floating point formats, as well as when returning a NaN from
a two-operand floating point function. This corrects the behaviour
of float<->double conversions on both ARM and SH4.
Signed-off-by: NChristophe Lyon <christophe.lyon@st.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Add a float16 type to softfloat, rather than using bits16 directly.
Also add the missing functions float16_is_quiet_nan(),
float16_is_signaling_nan() and float16_maybe_silence_nan(),
which are needed for the float16 conversion routines.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

This function is only used within exec.c, so no need to make it public.
Signed-off-by: NTristan Gingold <gingold@adacore.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@petalogix.com>

* 'linux-user-for-upstream' of git://gitorious.org/qemu-maemo/qemu:
  linux-user: fix for loopmount ioctl
  linux-user: fix build errors for mmap2-only ports
  user: speed up init_paths a bit
  linux-user: implement sched_{g,s}etaffinity
  linux-user/FLAT: allow targets to override FLAT processing
  linux-user/FLAT: fix auto-stack sizing
  linux-user: decode MAP_{UNINITIALIZED,EXECUTABLE} in strace
  linux-user: add ppoll syscall support
  linux-user/elfload: add FDPIC support
  linux-user: fix sizeof handling for getsockopt
  linux-user: Fix possible realloc memory leak
  linux-user: Add support for -version option

Signed-off-by: NChristophe Lyon <christophe.lyon@st.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Fix bit mask used when widening the result of shift on narrow input.
Signed-off-by: NChristophe Lyon <christophe.lyon@st.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

MIPS FPU instructions should start with a clean softfpu status. This
is done for the arithmetic operations and cvt instructions, but not
for round, trunc, ceil and floor.
Signed-off-by: NChris Dearman <chris@mips.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>