- 20 7月, 2012 10 次提交
-
-
由 Juan Quintela 提交于
We split it into 2 functions, foo_live_iterate, and foo_live_complete. At this point, we only remove the bits that are for the other stage, functionally this is equivalent to previous code. Signed-off-by: NJuan Quintela <quintela@redhat.com>
-
由 Juan Quintela 提交于
This patch splits stage 1 to its own function for both save_live users, ram and block. It is just a copy of the function, removing the parts of the other stages. Optimizations would came later. Signed-off-by: NJuan Quintela <quintela@redhat.com>
-
由 Juan Quintela 提交于
Enable the creation of a method to tell migration if that section is active and should be migrate. We use it for blk-migration, that is normally not active. We don't create the method for RAM, as setups without RAM are very strange O:-) Signed-off-by: NJuan Quintela <quintela@redhat.com>
-
由 Juan Quintela 提交于
Intead of abusing stage with value -1. Signed-off-by: NJuan Quintela <quintela@redhat.com>
-
由 Juan Quintela 提交于
It was used only once, just unfold. Signed-off-by: NJuan Quintela <quintela@redhat.com>
-
由 Juan Quintela 提交于
It was used only once, just unfold. Signed-off-by: NJuan Quintela <quintela@redhat.com>
-
由 Juan Quintela 提交于
Notice that the live migration users never unregister, so no problem about freeing the ops structure. Signed-off-by: NJuan Quintela <quintela@redhat.com>
-
由 Juan Quintela 提交于
This would make easier to add more operations in the next patches. Signed-off-by: NJuan Quintela <quintela@redhat.com>
-
由 Anthony Liguori 提交于
This reverts commit 50497292 which broke the build for ARM. I don't think this change is necessary. If I'm wrong, please recommit this changeset with an appropriate fix for ARM. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Jan Kiszka 提交于
[ The following text is in the "ISO-8859-1" character set. ] [ Your display is set for the "KOI8-R" character set. ] [ Some special characters may be displayed incorrectly. ] Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Nmalc <av1474@comtv.ru>
-
- 19 7月, 2012 5 次提交
-
-
由 Anthony Liguori 提交于
* kwolf/for-anthony: (41 commits) fdc-test: Clean up a bit fdc-test: introduce test_relative_seek fdc: fix relative seek qemu-iotests: Valgrind support coroutine-ucontext: Help valgrind understand coroutines qemu-io: Fix memory leaks hw/block-common: Factor out fall back to legacy -drive cyls=... blockdev: Don't limit DriveInfo serial to 20 characters hw/block-common: Factor out fall back to legacy -drive serial=... hw/block-common: Move BlockConf & friends from block.h Relax IDE CHS limits from 16383,16,63 to 65535,16,255 blockdev: Drop redundant CHS validation for if=ide hd-geometry: Compute BIOS CHS translation in one place qtest: Test we don't put hard disk info into CMOS for a CD-ROM ide pc: Put hard disk info into CMOS only for hard disks block: Geometry and translation hints are now useless, purge them qtest: Cover qdev property for BIOS CHS translation ide: qdev property for BIOS CHS translation qdev: New property type chs-translation qdev: Collect private helpers in one place ...
-
由 Anthony Liguori 提交于
* qemu-kvm/uq/master: virtio: move common irqfd handling out of virtio-pci virtio: move common ioeventfd handling out of virtio-pci event_notifier: add event_notifier_set_handler memory: pass EventNotifier, not eventfd ivshmem: wrap ivshmem_del_eventfd loops with transaction ivshmem: use EventNotifier and memory API event_notifier: add event_notifier_init_fd event_notifier: remove event_notifier_test event_notifier: add event_notifier_set apic: Defer interrupt updates to VCPU thread apic: Reevaluate pending interrupts on LVT_LINT0 changes apic: Resolve potential endless loop around apic_update_irq kvm: expose tsc deadline timer feature to guest kvm_pv_eoi: add flag support kvm: Don't abort on kvm_irqchip_add_msi_route()
-
由 Anthony Liguori 提交于
* qmp/queue/qmp: qapi: Convert getfd and closefd qapi: input_type_enum(): fix error message qmp: dump-guest-memory: improve schema doc
-
由 Anthony Liguori 提交于
* kraxel/bios.2: Add vgabios build rules to roms/Makefile
-
由 Anthony Liguori 提交于
* kraxel/usb.57: ehci: improve expire time calculation ehci: implement Interrupt Threshold Control support ehci: raise irq in the frame timer uhci: initialize expire_time when loading v1 vmstate usb: add usb attached scsi emulation scsi: add free_request callback
-
- 18 7月, 2012 7 次提交
-
-
由 Anthony Liguori 提交于
34bb443e broke the build but in a subtle way. The patch on the ML was actually based on the 1.1.1 stable branch (accidentally). When I merged it from the ML, the fuzzing got resolved in a such a way that the newly introduced Makefile dependency on GENERATED_HEADERS got lost (that was not in 1.1.1). The dist bits also got duplicated (but this is just cosmetic). Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
Let's stop screwing up releases by having a script do the work that Anthony's fat fingers can't seem to get right. Cc: Michael Roth <mdroth@linux.vnet.ibm.com> Reviewed-by: NEric Blake <eblake@redhat.com> Tested-by: NMichael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Michal Novotny 提交于
The description for set_password and expire_password commands is incomplete. This patch fixes the man page that is being generated to match the real behaviour of these functions. Signed-off-by: NMichal Novotny <minovotn@redhat.com> Signed-off-by: NMichal Novotny <minovotn@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Michal Novotny 提交于
This patch improves the description of -nodefaults QEMU command line option by adding more information what is being disabled using this command. Signed-off-by: NMichal Novotny <minovotn@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Michal Novotny 提交于
This is the patch to improve description for -{read|write}config functions. Signed-off-by: NMichal Novotny <minovotn@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Christian Borntraeger 提交于
qdev_prop_set_string uses object_property_set_str, which takes a const char * for the value. Lets propagate the constness into qdev_prop_set_string. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Stefan Weil 提交于
Although the rule also allows 'an' for historical reasons, 'a' is more common because 'h' is pronounced. Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NStefan Weil <sw@weilnetz.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 17 7月, 2012 18 次提交
-
-
由 Kevin Wolf 提交于
Readability of the test code has suffered as the test case evolved. This should improve it a bit again. Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Pavel Hrdina 提交于
Signed-off-by: NPavel Hrdina <phrdina@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Pavel Hrdina 提交于
Signed-off-by: NPavel Hrdina <phrdina@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Kevin Wolf 提交于
check -valgrind wraps all qemu-io calls with valgrind. This makes it a bit easier to debug problems that occur somewhere deep in a test case. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Kevin Wolf 提交于
valgrind tends to get confused and report false positives when you switch stacks and don't tell it about it. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Kevin Wolf 提交于
Almost all callers of create_iovec() forgot to destroy the qiov when the request has completed. Signed-off-by: NKevin Wolf <kwolf@redhat.com> Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
-
由 Markus Armbruster 提交于
Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Markus Armbruster 提交于
All current users (IDE, SCSI and virtio-blk) happen to share this 20 characters limit. Still, it should be left to device models. They already enforce their limits. They have to, as the DriveInfo limit only affects legacy -drive serial=..., not the qdev properties. usb-storage, which doesn't limit serial number length, also uses DriveInfo for -usbdevice. But that doesn't provide access to DriveInfo serial. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Markus Armbruster 提交于
Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Markus Armbruster 提交于
This stuff doesn't belong to block layer, and was put there only because a better home didn't exist then. Now it does. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Markus Armbruster 提交于
New limits straight from ATA4 6.2 Register delivered data transfer command sector addressing. I figure the old sector limit 63 was blindly copied from the BIOS int 13 limit. Doesn't apply to the hardware. No idea where the old cylinder limit comes from. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Markus Armbruster 提交于
Leave it to ide_init_drive(). Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Markus Armbruster 提交于
Currently, it is split between hd_geometry_guess() and pc_cmos_init_late(). Confusing. info qtree shows the result of the former. Also confusing. Fold the part done in pc_cmos_init_late() into hd_geometry_guess(). Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Markus Armbruster 提交于
Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Markus Armbruster 提交于
In particular, don't set disk type and geometry when a CD-ROM on bus ide.0 has media during CMOS initialization. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Markus Armbruster 提交于
There are two producers of these hints: drive_init() on behalf of -drive, and hd_geometry_guess(). The only consumer of the hint is hd_geometry_guess(). The callers of hd_geometry_guess() call it only when drive_init() didn't set the hints. Therefore, drive_init()'s hints are never used. Thus, hd_geometry_guess() only ever sees hints it produced itself in a prior call. Only the first call computes something, subsequent calls just repeat the first call's results. However, hd_geometry_guess() is never called more than once: the device models don't, and the block device is destroyed on unplug. Thus, dropping the repeat feature doesn't break anything now. If a block device wasn't destroyed on unplug and could be reused with a new device, then repeating old results would be wrong. Thus, dropping the repeat feature prevents future breakage. This renders the hints unused. Purge them from the block layer. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Markus Armbruster 提交于
Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
由 Markus Armbruster 提交于
This isn't quite orthodox. CHS translation is firmware configuration, communicated via the RTC's CMOS RAM, not a property of the disk. But it's best to treat it just like geometry anyway. Maintain backward compatibility exactly like for geometry: fall back to DriveInfo's translation, set with -drive trans=... Bonus: info qtree now shows the translation. Except when it shows "auto": that's resolved by pc_cmos_init_late(). To be addressed shortly. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-