block_mig_state.reads is an int, and multiplying by BLOCK_SIZE yielded a
negative number, resulting in a negative bandwidth (running on a 32-bit
machine).  Change order to avoid.
Signed-off-by: NAvishay Traeger <avishay@il.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

We need to keep DIR register unchanged across migration, but currently it
depends on the media_changed flags from block layer. Since we do not
save/restore it and the bdrv_open() called in dest node may set the
media_changed flag when trying to open floppy image, guest driver may think the
floppy have changed after migration. To fix this, a new filed media_changed in
FDrive strcutre was introduced in order to save and restore the it from block
layer through pre_save/post_load callbacks.
Signed-off-by: NJason Wang <jasowang@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

We also change the way the file parameter is parsed so IPv6 IP
addresses can be used, e.g.: "drive=nbd:[::1]:5000"
Signed-off-by: NNick Thomas <nick@bytemark.co.uk>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This commit has the side-effect of making the qemu-nbd binary
capable of binding to IPv6 addresses. ("-b ::1", for instance).
block/nbd.c fails to parse IPv6 IP addresses correctly at this
point, but will work over IPv6 when given a hostname. It still
works over IPv4 as before.

We move the qemu-sockets object from the 'common' to the 'block'
list in the Makefile. The common list includes the block list,
so this is effectively a no-op for the rest of the code.

We also add 32-bit 'magic' attributes to nbd_(request|reply) to
facilitate calculating maximum request/response sizes later.
Signed-off-by: NNick Thomas <nick@bytemark.co.uk>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NNick Thomas <nick@bytemark.co.uk>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NNick Thomas <nick@bytemark.co.uk>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

factor out ide initialization to call drive_get(IF_IDE)
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This fixes the problem when qemu continues even if -drive specification
is somehow invalid, resulting in a mess.  Applicable for both current
master and for stable-0.14 (and the same issue exist 0.13 and 0.12 too).

The prob can actually be seriuos: when you start guest with two drives
and make an error in the specification of one of them, and the guest
has something like a raid array on the two drives, guest may start failing
that array or kick "missing" drives which may result in a mess - this is
what actually happened to me, I did't want a resync at all, and a resync
resulted in re-writing (and allocating) a 4TB virtual drive I used for
testing, which in turn resulted in my filesystem filling up and whole
thing failing badly.  Yes it was just testing VM, I experimented with
larger raid arrays, but the end result was quite, well, unexpected.
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>
Acked-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

bdrv_delete must not be called for a NULL BlockDriverState.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

This adds the basic infrastructure for supporting progress output
on the command line, as well as progress support for qemu-img commands
'rebase' and 'convert'.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The block layer caches the device size to avoid doing lseek(fd, 0,
SEEK_END) every time this value is needed.  For removable media the
device size becomes stale if a new medium is inserted.  This patch
simply prevents device size caching for removable media.

A smarter solution is to update the cached device size when a new medium
is inserted.  Given that there are currently bugs with CD-ROM media
change I do not want to implement that approach until we've gotten
things correct first.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

It can be handy to know when the guest locks/unlocks the CD-ROM tray.
This trace event makes that possible.
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

When removing a drive from the host-side via drive_del we currently have
the following path:

drive_del
qemu_aio_flush()
bdrv_close()    // zaps bs->drv, which makes any subsequent I/O get
                // dropped.  Works as designed
drive_uninit()
bdrv_delete()   // frees the bs.  Since the device is still connected to
                // bs, any subsequent I/O is a use-after-free.

The value of bs->drv becomes unpredictable on free.  As long as it
remains null, I/O still gets dropped, however it could become non-null
at any point after the free resulting SEGVs or other QEMU state
corruption.

To resolve this issue as simply as possible, we can chose to not
actually delete the BlockDriverState pointer.  Since bdrv_close()
handles setting the drv pointer to NULL, we just need to remove the
BlockDriverState from the QLIST that is used to enumerate the block
devices.  This is currently handled within bdrv_delete, so move this
into its own function, bdrv_make_anon().

The result is that we can now invoke drive_del, this closes the file
descriptors and sets BlockDriverState->drv to NULL which prevents futher
IO to the device, and since we do not free BlockDriverState, we don't
have to worry about the copy retained in the block devices.

We also don't attempt to remove the qdev property since we are no longer
deleting the BlockDriverState on drives with associated drives.  This
also allows for removing Drives with no devices associated either.
Reported-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NRyan Harper <ryanh@us.ibm.com>
Acked-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Bug fix: routines 'ioreq_runio_qemu_sync' and 'ioreq_runio_qemu_aio'
won't call 'ioreq_unmap' or 'ioreq_finish' on errors, leaving ioreq in
the blkdev->inflight list and a leak.
Signed-off-by: NFeiran Zheng <famcool@gmail.com>
Acked-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Standard autoconf scripts include a --version flag so people can easily
query things.  Add this to qemu's configure so it too can integrate with
build systems that have standard autotool helpers.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

CPU_QuadU isn't used on all targets, but there's no harm in defining the
typedef anyway. It only needs to be guarded by CONFIG_SOFTFLOAT, because
softfloat-native doesn't have a float128 type. This avoids the need for
every new target which uses CPU_QuadU to add itself to an #ifdef in
what ought to be target-agnostic code.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Make the Neon helper routines use the correct FP status from
the CPUEnv rather than using a dummy static one. This means
they will correctly handle denormals and NaNs and will set
FPSCR exception bits properly.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Use the global 'env' variable in the helper functions in iwmmxt_helper.c.
This means we don't need to pass env as an argument to them any more.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Use the global 'env' variable in the helper functions in neon_helper.c.
This means we don't need to pass env as an argument to them any more.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Build all files matching *_helper.c with HELPER_CFLAGS, not just
op_helper.c. This allows you to put target helper functions which
use the global 'env' variable in multiple source files.

This only affects the ARM target as all the other targets currently only
have op_helper.c.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

At one point, usb-ccid.c attempts to use a %lX format specifier to print
a uint64_t, which is only correct on some host platforms.  This patch
corrects the statement to use the stdint specified PRIX64 constant instead.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

This patch adds almost complete support for the Milkymist system-on-chip
(http://www.milkymist.org).

Additional to running bare metal applications, booting a linux kernel with
initrd is supported.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

This patch adds wrappers for easy creation of the qdev devices.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

This patch adds support for Milkymist's VGA framebuffer.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

This patch adds support for Milkymist's simple UART.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

This patch adds support for Milkymist's texture mapping unit. For fast
computation this model needs hardware accelerated 3D graphics support
(OpenGL). There is no graphical output, all computations belong to internal
framebuffers only.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

This patch introduce a new config option CONFIG_OPENGL.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

This patch adds support for Milkymist's System Controller core. The model
has the following features:
 - support for shutting down and restarting the board
 - provide two timers and GPIO
 - provide registers for system identification and reading the boards
   capabilities
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

This patch adds support for Milkymist's SoftUSB core. This model differ
from the real hardware in its functionality. The real hardware consits of a
tiny freely programmable microcontroller which controls the USB ports. For
simplicity reasons, this model emulates only keyboard and mouse input
devices, eg. input events translates directly to the corresponding expected
messages.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

This patch adds support for Milkymist's Programmable FPU.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

This patch adds support for Milkymist's minimal Ethernet MAC.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

This patch adds support for Milkymist's memory card core.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

This patch adds support for the Milkymist's High Performance Dynamic Memory
Controller. This is just a dumb model without any functionality. While the
real hardware acts for example as a bridge between software and hardware
for sending SDRAM commans, this model will only eat up these commands and
always returns the expected hardware states, eg. PLL locked etc.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

This patch adds support for the Milkymist AC97 compatible sound output and
input core.
Signed-off-by: NMichael Walle <michael@walle.cc>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

This reverts commit 9bcfc7da.

S390x uses the QuadU type, so let's enable it.
Signed-off-by: NUlrich Hecht <uli@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

S390x user emulation can do nptl. Reflect this in the configure script.
Signed-off-by: NUlrich Hecht <uli@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

This patch enables the instruction disassembler when using an
S390x target.
Signed-off-by: NUlrich Hecht <uli@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>