Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-33-armbru@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-32-armbru@redhat.com>

qmp_greeting() offers capabilities to the client, and
qmp_qmp_capabilities() accepts or denies capabilities requested by the
client.  The two compute the set of available capabilities
independently.  Not nice.

Clean this up as follows.  Compute available capabilities just once in
monitor_qmp_caps_reset(), and store them in Monitor member
qmp.capab_offered[].  Have qmp_greeting() and qmp_qmp_capabilities()
use that.  Both are now oblivious of capability details.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-31-armbru@redhat.com>

qobject_from_jsonf() aborts on error, unlike qobject_from_jsonv(),
which returns null.  Since all remaining users of qobject_from_jsonf()
cope fine with null, change it to return null.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-30-armbru@redhat.com>

There's just one use of qobject_from_jsonf() to parse a JSON object
left: timestamp_put().  Switch it to qdict_from_jsonf_nofail().
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-29-armbru@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-28-armbru@redhat.com>

monitor_qmp_respond() takes both a response object and an error
object.  If an error object is non-null, the response object must be
null, and the response is built from the error object.

Of the two callers, one always passes a null response object, and one
a null error object.  Move building the response object from the error
object to the latter, and drop the error object parameter.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-27-armbru@redhat.com>

get_qmp_greeting() returns a QDict * as QObject *.  It's caller
converts it right back.

Return QDict * instead.  While there, rename to qmp_greeting().
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-26-armbru@redhat.com>

monitor_json_emitter() and monitor_json_emitter_raw() are
unnecessarily general: they can send arbitrary JSON values, even
though we only ever use them for QMP, which may send only JSON
objects.

Specialize the argument from QObject * to QDict *, and rename to
qmp_queue_response(), qmp_send_response().

All callers but one lose an upcast.  The lone exception gains a
downcast; the next commit will get rid of it.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-25-armbru@redhat.com>

By using the more specific type, we get fewer downcasts.  The
downcasts are safe, but not obviously so, at least not locally.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-24-armbru@redhat.com>

All callers of qmp_build_error_object() duplicate the code to wrap it
in a response object.  Replace it by qmp_error_response() that
captures the duplicated code, including error_free().
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-23-armbru@redhat.com>

Many uses of qobject_from_jsonf() convert JSON objects.  Create new
convenience function qdict_from_jsonf_nofail() that includes the
conversion to QDict.  The next few commits will put it to use.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-22-armbru@redhat.com>

Wrapping global variables in a struct without a use for the wrapper
struct buys us nothing but longer lines.  Unwrap them.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-21-armbru@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-20-armbru@redhat.com>

handle_qmp_command() reports JSON syntax errors right away.  This is
wrong when OOB is enabled, because the errors can "jump the queue"
then.

The previous commit fixed the same bug for semantic errors, by
delaying the checking until dispatch.  We can't delay the checking, so
delay the reporting.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-19-armbru@redhat.com>

handle_qmp_command() reports certain errors right away.  This is wrong
when OOB is enabled, because the errors can "jump the queue" then, as
the previous commit demonstrates.

To fix, we need to delay errors until dispatch.  Do that for semantic
errors, mostly by reverting ill-advised parts of commit cf869d53
"qmp: support out-of-band (oob) execution".  Bonus: doesn't run
qmp_dispatch_check_obj() twice, once in handle_qmp_command(), and
again in do_qmp_dispatch().  That's also due to commit cf869d53.

The next commit will fix queue jumping for syntax errors.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-18-armbru@redhat.com>

When OOB is enabled, out-of-band commands are executed right away,
everything else is queued.  This lets out-of-band commands "jump the
queue".

However, certain errors are always reported right away, and therefore
can jump the queue even when the erroneous input does not request
out-of-band execution.  These errors are pretty unlikely to occur in
production, but it's wrong all the same.  Mark FIXME.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NPeter Xu <peterx@redhat.com>
Message-Id: <20180703085358.13941-17-armbru@redhat.com>

Change monitor_qmp_dispatch_one() to take its parameters unwrapped,
move monitor_resume() to the one caller that needs it, rename the
function to monitor_qmp_dispatch().
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-16-armbru@redhat.com>

monitor_qmp_dispatch_one() frees a QMPRequest manually, because it
needs to keep a reference to ->id.  Premature optimization.  Take an
additional reference so we can use qmp_request_free().
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-15-armbru@redhat.com>

Commit 71da4667 "monitor: separate QMP parser and dispatcher" moved
the handle_qmp_command tracepoint from handle_qmp_command() to
monitor_qmp_dispatch_one().  This delays tracing from enqueue time to
dequeue time.  Revert that.  Dequeue remains adequately visible via
tracepoint monitor_qmp_cmd_in_band.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-14-armbru@redhat.com>

Commit cf869d53 "qmp: support out-of-band (oob) execution" added a
general mechanism for command-independent arguments just for an
out-of-band flag:

    The "control" key is introduced to store this extra flag.  "control"
    field is used to store arguments that are shared by all the commands,
    rather than command specific arguments.  Let "run-oob" be the first.

However, it failed to reject unknown members of "control".  For
instance, in QMP command

    {"execute": "query-name", "id": 42, "control": {"crap": true}}

"crap" gets silently ignored.

Instead of fixing this, revert the general "control" mechanism
(because YAGNI), and do it the way I initially proposed, with key
"exec-oob".  Simpler code, simpler interface.

An out-of-band command

    {"execute": "migrate-pause", "id": 42, "control": {"run-oob": true}}

becomes

    {"exec-oob": "migrate-pause", "id": 42}
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-13-armbru@redhat.com>
[Commit message typo fixed]

Commit cf869d53 "qmp: support out-of-band (oob) execution"
accidentally made qemu-ga accept and ignore "control".  Fix that.

Out-of-band execution in a monitor that doesn't support it now fails
with

    {"error": {"class": "GenericError", "desc": "QMP input member 'control' is unexpected"}}

instead of

    {"error": {"class": "GenericError", "desc": "Please enable out-of-band first for the session during capabilities negotiation"}}

The old description is suboptimal when out-of-band cannot not be
enabled, or the command doesn't support out-of-band execution.

The new description is a bit unspecific, but it'll do.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-12-armbru@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-11-armbru@redhat.com>

Commit cf869d53 "qmp: support out-of-band (oob) execution" changed
how we check "id":

    Note that in the patch I exported qmp_dispatch_check_obj() to be
    used to check the request earlier, and at the same time allowed
    "id" field to be there since actually we always allow that.

The part after "and" is ill-advised: it makes qemu-ga accept and
ignore "id".  Revert.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-10-armbru@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-9-armbru@redhat.com>

Commit cf869d53 "qmp: support out-of-band (oob) execution" made
"id" mandatory for all commands when the client accepted capability
"oob".  This is rather onerous when you play with QMP by hand, and
unnecessarily so: only out-of-band commands need an ID for reliable
matching of response to command.

Revert that part of commit cf869d53 for now, but have documentation
advise on the need to use "id" with out-of-band commands.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-Id: <20180703085358.13941-8-armbru@redhat.com>
Reviewed-by: NDaniel P. Berrangé <berrange@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-7-armbru@redhat.com>

tests/qmp-test tests an out-of-band command overtaking a slow in-band
command.  To do that, it needs:

1. An in-band command that *reliably* takes long enough to be
   overtaken.

2. An out-of-band command to do the overtaking.

3. To avoid delays, a way to make the in-band command complete quickly
   after it was overtaken.

To satisfy these needs, commit 469638f9 provides the rather
peculiar oob-capable QMP command x-oob-test:

* With "lock": true, it waits for a global semaphore.

* With "lock": false, it signals the global semaphore.

To satisfy 1., the test runs x-oob-test in-band with "lock": true.
To satisfy 2. and 3., it runs x-oob-test out-of-band with "lock": false.

Note that waiting for a semaphore violates the rules for oob-capable
commands.  Running x-oob-test with "lock": true hangs the monitor
until you run x-oob-test with "lock": false on another monitor (which
you might not have set up).

Having an externally visible QMP command that may hang the monitor is
not nice.  Let's apply a little more ingenuity to the problem.  Idea:
have an existing command block on reading a FIFO special file, unblock
it by opening the FIFO for writing.

For 1., use

    {"execute": "blockdev-add",  "id": ID1,
     "arguments": {
        "driver": "blkdebug", "node-name": ID1, "config": FIFO,
        "image": { "driver": "null-co"}}}

where ID1 is an arbitrary string, and FIFO is the name of the FIFO.

For 2., use

    {"execute": "migrate-pause", "id": ID2, "control": {"run-oob": true}}

where ID2 is a different arbitrary string.  Since there's no migration
to pause, the command will fail, but that's fine; instant failure is
still a test of out-of-band responses overtaking in-band commands.

For 3., open FIFO for writing.

Drop QMP command x-oob-test.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-6-armbru@redhat.com>
[Error checking tweaked]

Events are broadcast to all monitors.  If another monitor's client has
a command with the same ID in flight, the event will incorrectly claim
that command was dropped.  This must be fixed before out-of-band
execution can graduate from "experimental".
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-5-armbru@redhat.com>

OOB documentation is spread over qmp-spec.txt sections 2.2.1
Capabilities and 2.3 Issuing Commands.  The amount of detail is a bit
distracting there.  Move the meat of the matter to new section 2.3.1
Out of band execution.

Throw in a few other improvements while there:

* 2.2 Server Greeting: Drop advice to search entire capabilities
  array; should be obvious.

* 3. QMP Examples

  - 3.1 Server Greeting: Update greeting to the one we expect for the
    release.  Now shows capability "oob".  Update qmp-intro.txt
    likewise.

  - 3.2 Capabilities negotiation: Show client accepting capability
    "oob".

  - 3.7 Out-of-band execution: New.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-4-armbru@redhat.com>
[Whitespace tidied up]

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-3-armbru@redhat.com>

Affects documentation and a few error messages.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <20180703085358.13941-2-armbru@redhat.com>

* IEC units series (Philippe)
* Hyper-V PV TLB flush (Vitaly)
* git archive detection (Daniel)
* host serial passthrough fix (David)
* NPT support for SVM emulation (Jan)
* x86 "info mem" and "info tlb" fix (Doug)

# gpg: Signature made Mon 02 Jul 2018 16:18:21 BST
# gpg:                using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg:                 aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4  E2F7 7E15 100C CD36 69B1
#      Subkey fingerprint: F133 3857 4B66 2389 866C  7682 BFFB D25F 78C7 AE83

* remotes/bonzini/tags/for-upstream: (50 commits)
  tcg: simplify !CONFIG_TCG handling of tb_invalidate_*
  i386/monitor.c: make addresses canonical for "info mem" and "info tlb"
  target-i386: Add NPT support
  serial: Open non-block
  bsd-user: Use the IEC binary prefix definitions
  linux-user: Use the IEC binary prefix definitions
  tests/crypto: Use the IEC binary prefix definitions
  vl: Use the IEC binary prefix definitions
  monitor: Use the IEC binary prefix definitions
  cutils: Do not include "qemu/units.h" directly
  hw/rdma: Use the IEC binary prefix definitions
  hw/virtio: Use the IEC binary prefix definitions
  hw/vfio: Use the IEC binary prefix definitions
  hw/sd: Use the IEC binary prefix definitions
  hw/usb: Use the IEC binary prefix definitions
  hw/net: Use the IEC binary prefix definitions
  hw/i386: Use the IEC binary prefix definitions
  hw/ppc: Use the IEC binary prefix definitions
  hw/mips: Use the IEC binary prefix definitions
  hw/mips/r4k: Constify params_size
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Assorted tlb and tb caching fixes

# gpg: Signature made Mon 02 Jul 2018 17:03:07 BST
# gpg:                using RSA key 64DF38E8AF7E215F
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>"
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A  05C0 64DF 38E8 AF7E 215F

* remotes/rth/tags/pull-tcg-20180702:
  cpu: Assert asidx_from_attrs return value in range
  accel/tcg: Avoid caching overwritten tlb entries
  accel/tcg: Don't treat invalid TLB entries as needing recheck
  accel/tcg: Correct "is this a TLB miss" check in get_page_addr_code()
  tcg: Define and use new tlb_hit() and tlb_hit_page() functions
  translate-all: fix locking of TBs whose two pages share the same physical page
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Merge remote-tracking branch 'remotes/kraxel/tags/seabios-1.11.2-20180702-pull-request' into staging

seabios: update to release 1.11.2, add/update configuration.
vgabios: remove (old unused lgpl'ed vgabios).
ramfb,bochs-display: use new vgabios roms.

# gpg: Signature made Mon 02 Jul 2018 16:42:06 BST
# gpg:                using RSA key 4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* remotes/kraxel/tags/seabios-1.11.2-20180702-pull-request:
  ramfb: enable vgabios
  bochs-display: enable vgabios
  seabios: update bios and vgabios binaries
  vgabios: remove submodule and build rules.
  seabios: enable ide dma
  seabios: add vga configs for bochs-display and ramfb
  seabios: update submodule to release 1.11.2
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add vgabios binary to fw_cfg vgaroms.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add vgabios binary to pci rom bar.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Adds two new vgabios binaries, for ramfb and bochs-display.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

It's the old, lgpl vgabios implementation.

Was left in as fallback when we switched to seavgabios, so we could
easily switch back in case we see regressions.  It's unused since years
now, reportedly doesn't even build, and lacks support for recently (and
not so recently) added display devices.

Zap it.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

QNX reportedly requires this to boot.
Should also speed up booting other guests.

Note: Upstream seabios defaults this to 'n' to due to known problems
on physical hardware (qemu not affected), and wouldn't flip the default
to 'y'.  So we adjust our local build config accordingly.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>