Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Fix temporary handling in cp15 tls register load/store.
Signed-off-by: NPaul Brook <paul@codesourcery.com>

This is a reimplementation of prior versions which adds
the ability to define cpu models for contemporary processors.
The added models are likewise selected via -cpu <name>,
and are intended to displace the existing convention
of "-cpu qemu64" augmented with a series of feature flags.

A primary motivation was determination of a least common
denominator within a given processor class to simplify guest
migration.  It is still possible to modify an arbitrary model
via additional feature flags however the goal here was to
make doing so unnecessary in typical usage.  The other
consideration was providing models names reflective of
current processors.  Both AMD and Intel have reviewed the
models in terms of balancing generality of migration vs.
excessive feature downgrade relative to released silicon.

This version of the patch replaces the prior hard wired
definitions with a configuration file approach for new
models.  Existing models are thus far left as-is but may
easily be transitioned to (or may be overridden by) the
configuration file representation.

Proposed new model definitions are provided here for current
AMD and Intel processors.  Each model consists of a name
used to select it on the command line (-cpu <name>), and a
model_id which corresponds to a least common denominator
commercial instance of the processor class.

A table of names/model_ids may be queried via "-cpu ?model":

        :
    x86       Opteron_G3  AMD Opteron 23xx (Gen 3 Class Opteron)
    x86       Opteron_G2  AMD Opteron 22xx (Gen 2 Class Opteron)
    x86       Opteron_G1  AMD Opteron 240 (Gen 1 Class Opteron)
    x86          Nehalem  Intel Core i7 9xx (Nehalem Class Core i7)
    x86           Penryn  Intel Core 2 Duo P9xxx (Penryn Class Core 2)
    x86           Conroe  Intel Celeron_4x0 (Conroe/Merom Class Core 2)
        :

Also added is "-cpu ?dump" which exhaustively outputs all config
data for all defined models, and "-cpu ?cpuid" which enumerates
all qemu recognized CPUID feature flags.

The pseudo cpuid flag 'check' when added to the feature flag list
will warn when feature flags (either implicit in a cpu model or
explicit on the command line) would have otherwise been quietly
unavailable to a guest:

    # qemu-system-x86_64 ... -cpu Nehalem,check
    warning: host cpuid 0000_0001 lacks requested flag 'sse4.2|sse4_2' [0x00100000]
    warning: host cpuid 0000_0001 lacks requested flag 'popcnt' [0x00800000]

A similar 'enforce' pseudo flag exists which in addition
to the above causes qemu to error exit if requested flags are
unavailable.

Configuration data for a cpu model resides in the target config
file which by default will be installed as:

    /usr/local/etc/qemu/target-<arch>.conf

The format of this file should be self explanatory given the
definitions for the above six models and essentially mimics
the structure of the static x86_def_t x86_defs.

Encoding of cpuid flags names now allows aliases for both the
configuration file and the command line which reconciles some
Intel/AMD/Linux/Qemu naming differences.

This patch was tested relative to qemu.git.
Signed-off-by: Njohn cooper <john.cooper@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

v1 -> v2  coding style changes

Add a tty close callback. Right now if a guest device that is connected
to a tty-based chardev in the host is removed, the tty is not closed.
With this patch it is closed.

Example use case is connecting an emulated USB serial cable in the guest
to ttyS0 of the host using the monitor command:

usb_add serial::/dev/ttyS0

and then removing the device with:

usb_del serial::/dev/ttyS0
Signed-off-by: NDavid Ahern <daahern@cisco.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

o Implement receive overrun status.  The FreeBSD uart driver
   relies on this status in it's probe routine to determine the size
   of the FIFO supported.
 o As per the 16550 spec, do not overwrite the RX FIFO on an RX overrun.
 o Do not allow TX or RX FIFO overruns to increment the data valid count
   beyond the size of the FIFO.
 o For reads of the IIR register, only clear the "TX holding register
   emtpy interrupt" if the read reports this interrupt.  This is required
   by the specification and avoids losing TX interrupts when other,
   higher priority interrupts (usually RX) are reported first.
Signed-off-by: NJustin T. Gibbs <gibbs@FreeBSD.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: Nmalc <av1474@comtv.ru>

Use rwhandler to simplify apb_pci.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

pci_data_write ignores high 8 bit in address,
so there seems to be no need to set them
in apb_pci.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

cc1: warnings being treated as errors
/src/qemu/hw/pl181.c: In function 'pl181_fifo_run':
/src/qemu/hw/pl181.c:185: error: 'value' may be used uninitialized in this function
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: Nmalc <av1474@comtv.ru>

Signed-off-by: Nmalc <av1474@comtv.ru>

Acked-by: N"Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

The qemu_ld32s op is only defined if TCG_TARGET_REG_BITS == 64.
Signed-off-by: NJay Foad <jay.foad@gmail.com>
Signed-off-by: Nmalc <av1474@comtv.ru>

The PL181 data transfer loop incorrectly terminates after the last FIFO
word is popped, discarding the last 3 bytes of data on a write transfer.
Signed-off-by: NPaul Brook <paul@codesourcery.com>

With SIG_IPI blocked vcpu loop exit notification happens via -EAGAIN
from KVM_RUN.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Change the way the internal qemu signal, used for communication between
iothread and vcpus, is handled.

Block and consume it with sigtimedwait on the outer vcpu loop, which
allows more precise timing control.

Change from standard signal (SIGUSR1) to real-time one, so multiple
signals are not collapsed.

Set the signal number on KVM's in-kernel allowed sigmask.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

In KVM mode the global mutex is released when vcpus are executing,
which means acquiring the fairness mutex is not required.

Also for KVM there is one thread per vcpu, so tcg_has_work is meaningless.

Add a new qemu_wait_io_event_common function to hold common code
between TCG/KVM.
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Otherwise a vcpu thread can run the sigchild handler causing
waitpid() from iothread to fail.
Signed-off-by: NMarcelo Tosatti <mtosa...@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Remove all references to KVM_CR3_CACHE as it was never implemented.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This should explain a lot of the weird breakages of upstream KVM we've
seen recently (actually we should have seen it much earlier):

Stop translating eflags into TCG format when in kvm mode as we never
translate it back and rather sync this broken state into the kernel.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

CRISv10 cores (unlike v32) do not take any interrupts while delayed
jumps are pending (delay slots).
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

brk insns while in user mode raise priv insn exceptions.
This commit makes gdbserver work on linux guests.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@petalogix.com>

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@petalogix.com>

Use 32-bit arithmetic for the address offset calculation to fix a
build failure on 32-bit hosts.
Signed-off-by: NJay Foad <jay.foad@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

On 32-bit hosts op_qemu_ld32s is unused. Remove it to fix the
following assertion failure:

qemu-alpha: tcg/tcg.c:1055:
tcg_add_target_add_op_defs: Assertion `tcg_op_defs[op].used' failed.
Signed-off-by: NJay Foad <jay.foad@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Previously ORC was always implemented by tcg-op.h with
an explicit NOT opcode.  Allow a target implementation.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Previously ANDC was always implemented by tcg-op.h with
an explicit NOT opcode.  Allow a target implementation.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The fallback implementation of "ret = arg1 ^ -1" isn't ideal
because of the extra tcg op to load the minus one.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The fallback implementation of "ret = 0 - arg1" isn't ideal,
first because of the extra tcg op to load the zero, and second
because we fail to handle zero as %g0 for arg1 of the sub.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

/src/qemu/hw/ide/core.c: In function 'ide_drive_pre_save':
/src/qemu/hw/ide/core.c:2740: warning: comparison is always false due to limited range of data type
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

/src/qemu/net.c: In function `net_check_clients':
/src/qemu/net.c:1287: warning: `has_nic' might be used uninitialized in this function
/src/qemu/net.c:1287: warning: `has_host_dev' might be used uninitialized in this function
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: Nmalc <av1474@comtv.ru>