We automatically delete blockdev host parts on unplug of the guest
device.  Too much magic, but we can't change that now.

The delete happens early in the guest device teardown, before the
connection to the host part is severed.  Thus, the guest part's
pointer to the host part dangles for a brief time.  No actual harm
comes from this, but we'll catch such dangling pointers a few commits
down the road.  Clean up the dangling pointers by delaying the
automatic deletion until the guest part's pointer is gone.

Device usb-storage deliberately makes two qdev properties refer to the
same drive, because it automatically creates a second device.  Again,
too much magic we can't change now.  Multiple references worked okay
before, but now free_drive() dies for the second one.  Zap the extra
reference.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

To fix https://bugs.launchpad.net/qemu/+bug/597402 where qemu fails to
call unlink() on temporary snapshots due to bs->is_temporary getting clobbered
in bdrv_open_common() after being set in bdrv_open() which calls the former.

We don't need to initialize bs->is_temporary in bdrv_open_common().
Signed-off-by: NRyan Harper <ryanh@us.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Unused since commit 6ced55a5.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

All callers of ide_create_drive() ignore its value.  Currently
harmless, because it fails only when qdev_init() fails, which fails
only when ide_drive_initfn() fails, which never fails.

Brittle.  Change it to die instead of silently ignoring failure.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

None of its callers checks for failure.  scsi_hot_add() can crash
because of that:

(qemu) drive_add 4 if=scsi,format=host_device,file=/dev/sg1
scsi-generic: scsi generic interface too old
Segmentation fault (core dumped)

Fix all callers, not just scsi_hot_add().
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Before the raw/file split we used to allow filenames with colons for host
device only.  While this was more by accident than by design people rely
on it, so we need to bring it back.

So move the host device probing to be before the protocol detection
again.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

People were wondering why qemu-img check failed after they tried to preallocate
a large qcow2 file and ran out of disk space.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

i386 cpuid.c currently claims XSAVE is supported in the CPUID filter,
but that's not true: Only FXSAVE is supported. Remove that bit
from the filter.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

ssse3 uses tables with only two entries per op, but it is indexed
with b1 which can contain variables upto 3. This happens when ssse3
or sse4 are used with REP* prefixes.

Add boundary checking for this case.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NChih-Min Chao <cmchao@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NChih-Min Chao <cmchao@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NChih-Min Chao <cmchao@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Remove generated qemu-options.def at "make distclean".
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

QMP/qmp-commands.txt is a generated file.
Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

We were ignoring REX_B while special-casing NOP, i.e. xchg eax,eax.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Loongson CPU uses a load to zero register for prefetch.
Emulate it as a NOP.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

scanf calls must not use PRI constants, they have probably the wrong size and
corrupt memory. We could replace them by SCN ones, but strtol is simpler than
scanf here anyway. While at it, also fix the parsers to reject garbage after
the number ("4096xyz" was accepted before).
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Richard Henderson <rth@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NShahar Havivi <shaharh@redhat.com>
Acked-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NShahar Havivi <shaharh@redhat.com>
Acked-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Commit 50e32ea8 changed the behaviour
for the return type of net_client_init() when a nic type with no init
method was specified. 'none' is one such nic type. Instead of returning
0, which gets interpreted as an index into the nd_table[] array, we
switched to returning -1, which signifies an error as well.

That broke VM start with '-net none'. Testing was only done with the
monitor command 'pci_add', which doesn't fail.

The correct fix would still be to return 0+ values from
net_client_init() only when the return value can be used as an index to
refer to an entry in nd_table[]. With the current code, callers can
erroneously poke into nd_table[0] when -net nic is used, which can lead
to badness.

However, this commit just returns to the previous behaviour before the
offending commit.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

We currently only clear SVM_EVTINJ_VALID after successful interrupt
delivery. This apparently does not match real hardware which clears the
whole event_inj field on every vmexit, including unsuccessful interrupt
delivery.
Reported-by: NErik van der Kouwe <vdkouwe@cs.vu.nl>
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The commit 8e65b7c0 introduced
expire_time of UHCIState. But expire_time is not in vmstate, the
second uhci_frame_timer will not be fired immediately after loadvm.
Signed-off-by: NTeLeMan <geleman@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: Ncmchao <cmchao@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: Ncmchao <cmchao@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: Ncmchao <cmchao@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: Ncmchao <cmchao@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: Ncmchao <cmchao@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: Ncmchao <cmchao@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: Ncmchao <cmchao@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: Ncmchao <cmchao@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: Ncmchao <cmchao@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: Ncmchao <cmchao@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: Ncmchao <cmchao@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: Ncmchao <cmchao@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

For all i, ports_map[i] is used in and only in the i-th iteration.
Replace the dynamic array by a scalar variable.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Acked-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Acked-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

This patch avoids handling write watchpoints on read-only memory access.
It also breaks the searching loop for watchpoint once the setup for
handling watchpoint later is done.
Signed-off-by: NJun Koi <junkoi2004@gmail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>