actually the code
    if (ret == -ENODEV || ret == -ENOSYS || ret == -EOPNOTSUPP ||
        ret == -ENOTTY) {
        ret = -ENOTSUP;
    }
is present twice and will be added a couple more times. Create helper
for this.

CC: Kevin Wolf <kwolf@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Peter Lieven <pl@kamp.de>
CC: Fam Zheng <famz@redhat.com>
Signed-off-by: NDenis V. Lunev <den@openvz.org>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NPeter Lieven <pl@kamp.de>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

(With the previous atapi_dma flag recovery)
If migration happens between the ATAPI command being written and the
bmdma being started, the DMA is dropped.  Eventually the guest times
out and recovers, but that can take many seconds.
(This is rare, on a pingpong reading the CD continuously I hit
this about ~1/30-1/50 migrates)

I don't think we've got enough state to be able to recover safely
at this point, so I throw a 'medium error, no seek complete'
that I'm assuming guests will try and recover from an apparently
dirty CD.

OK, it's a hack, the real solution is probably to push a lot of
ATAPI state into the migration stream, but this is a fix that
works with no stream changes. Tested only on Linux (both RHEL5
(pre-libata) and RHEL7).
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

If a migration happens just after the guest has kicked
off an ATAPI command and kicked off DMA, we lose the atapi_dma
flag, and the destination tries to complete the command as PIO
rather than DMA.  This upsets Linux; modern libata based kernels
stumble and recover OK, older kernels end up passing bad data
to userspace.
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

# gpg: Signature made Fri 06 Feb 2015 14:10:40 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/net-pull-request:
  monitor: more accurate completion for host_net_remove()
  net: del hub port when peer is deleted
  net: remove the wrong comment in net_init_hubport()
  monitor: print hub port name during info network
  rtl8139: simplify timer logic
  MAINTAINERS: add Jason Wang as net subsystem maintainer
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Current completion for host_net_remove will show hub ports and clients
that were not peered with hub ports. Fix this.

Cc: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NJason Wang <jasowang@redhat.com>
Message-id: 1422860798-17495-4-git-send-email-jasowang@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

We should del hub port when peer is deleted since it will not be reused
and will only be freed during exit.
Signed-off-by: NJason Wang <jasowang@redhat.com>
Message-id: 1422860798-17495-3-git-send-email-jasowang@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Not only nic could be the one to peer.
Signed-off-by: NJason Wang <jasowang@redhat.com>
Message-id: 1422860798-17495-2-git-send-email-jasowang@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NJason Wang <jasowang@redhat.com>
Message-id: 1422860798-17495-1-git-send-email-jasowang@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Pavel Dovgalyuk reports that TimerExpire and the timer are not restored
correctly on the receiving end of migration.

It is not clear to me whether this is really the case, but we can take
the occasion to get rid of the complicated code that computes PCSTimeout
on the fly upon changes to IntrStatus/IntrMask.  Just always keep a
timer running, it will fire every ~130 seconds at most if the interrupt
is masked with TimerInt != 0.

This makes rtl8139_set_next_tctr_time idempotent (when the virtual clock
is stopped between two calls, as is the case during migration).

Tested with Frediano's qtest.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-id: 1421765099-26190-1-git-send-email-pbonzini@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

# gpg: Signature made Fri 06 Feb 2015 13:45:06 GMT using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg:                 aka "Stefan Hajnoczi <stefanha@gmail.com>"

* remotes/stefanha/tags/tracing-pull-request:
  trace: Print PID and time in stderr traces
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

When debugging migration it's useful to know the PID of
each trace message so you can figure out if it came from the source
or the destination.

Printing the time makes it easy to do latency measurements or timings
between trace points.
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Message-id: 1421746875-9962-1-git-send-email-dgilbert@redhat.com
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

migration/next for 20150205

# gpg: Signature made Thu 05 Feb 2015 16:17:08 GMT using RSA key ID 5872D723
# gpg: Can't check signature: public key not found

* remotes/juanquintela/tags/migration/20150205:
  fix mc146818rtc wrong subsection name to avoid vmstate_subsection_load() fail
  Tracify migration/rdma.c
  Add migration stream analyzation script
  migration: Append JSON description of migration stream
  qemu-file: Add fast ftell code path
  QJSON: Add JSON writer
  Print errors in some of the early migration failure cases.
  Migration: Add lots of trace events
  savevm: Convert fprintf to error_report
  vmstate-static-checker: update whitelist
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

coverity: Improve and extend model

# gpg: Signature made Thu 05 Feb 2015 16:20:49 GMT using RSA key ID EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"

* remotes/armbru/tags/pull-cov-model-2015-02-05:
  MAINTAINERS: Add myself as Coverity model maintainer
  coverity: Model g_free() isn't necessarily free()
  coverity: Model GLib string allocation partially
  coverity: Improve model for GLib memory allocation
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

fix mc146818rtc wrong subsection name to avoid vmstate_subsection_load() fail
during incoming migration or loadvm.
Signed-off-by: NZhang Haoyu <zhanghy@sangfor.com.cn>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>

Turn all the D/DD/DDDPRINTFs into trace events
Turn most of the fprintf(stderr, into error_report
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

This patch adds a python tool to the scripts directory that can read
a dumped migration stream if it contains the JSON description of the
device states. I constructs a human readable JSON stream out of it.

It's very simple to use:

  $ qemu-system-x86_64
    (qemu) migrate "exec:cat > mig"
  $ ./scripts/analyze_migration.py -f mig
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

One of the annoyances of the current migration format is the fact that
it's not self-describing. In fact, it's not properly describing at all.
Some code randomly scattered throughout QEMU elaborates roughly how to
read and write a stream of bytes.

We discussed an idea during KVM Forum 2013 to add a JSON description of
the migration protocol itself to the migration stream. This patch
adds a section after the VM_END migration end marker that contains
description data on what the device sections of the stream are composed of.

This approach is backwards compatible with any QEMU version reading the
stream, because QEMU just stops reading after the VM_END marker and ignores
any data following it.

With an additional external program this allows us to decipher the
contents of any migration stream and hopefully make migration bugs easier
to track down.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

For ftell we flush the output buffer to ensure that we don't have anything
lingering in our internal buffers. This is a very safe thing to do.

However, with the dynamic size measurement that the dynamic vmstate
description will bring this would turn out quite slow.

Instead, we can fast path this specific measurement and just take the
internal buffers into account when telling the kernel our position.

I'm sure I overlooked some corner cases where this doesn't work, so
instead of tuning the safe, existing version, this patch adds a fast
variant of ftell that gets used by the dynamic vmstate description code
which isn't critical when it fails.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

To support programmatic JSON assembly while keeping the code that generates it
readable, this patch introduces a simple JSON writer. It emits JSON serially
into a buffer in memory.

The nice thing about this writer is its simplicity and low memory overhead.
Unlike the QMP JSON writer, this one does not need to spawn QObjects for every
element it wants to represent.

This is a prerequisite for the migration stream format description generator.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Mostly on the load side, so that when we get a complaint about
a migration failure we can figure out what it didn't like.
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Convert a bunch of fprintfs to error_reports
Signed-off-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Commit 22382bb9 renamed the
'hw_cursor_x' and 'hw_cursor_y' fields in cirrus_vga.  Update the static
checker's whitelist to allow matching against the old and new names.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Memory allocated with GLib needs to be freed with GLib.  Freeing it
with free() instead of g_free() is a common error.  Harmless when
g_free() is a trivial wrapper around free(), which is commonly the
case.  But model the difference anyway.

In a local scan, this flags four ALLOC_FREE_MISMATCH.  Requires
--enable ALLOC_FREE_MISMATCH, because the checker is still preview.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>

Without a model, Coverity can't know that the result of g_strdup()
needs to be fed to g_free().

One way to get such a model is to scan GLib, build a derived model
file with cov-collect-models, and use that when scanning QEMU.
Unfortunately, the Coverity Scan service we use doesn't support that.

Thus, we're stuck with the other way: write a user model.  Doing that
for all of GLib is hardly practical.  I'm doing it for the "String
Utility Functions" we actually use that return dynamically allocated
strings.

In a local scan, this flags 20 additional RESOURCE_LEAKs.  The ones I
checked look genuine.

It also loses a NULL_RETURNS about ppce500_init() using
qemu_find_file() without error checking.  I don't understand why.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>

In current versions of GLib, g_new() may expand into g_malloc_n().
When it does, Coverity can't see the memory allocation, because we
don't model g_malloc_n().  Similarly for g_new0(), g_renew(),
g_try_new(), g_try_new0(), g_try_renew().

Model g_malloc_n(), g_malloc0_n(), g_realloc_n().  Model
g_try_malloc_n(), g_try_malloc0_n(), g_try_realloc_n() by adding
indeterminate out of memory conditions on top.

To avoid undue duplication, replace the existing models for g_malloc()
& friends by trivial wrappers around g_malloc_n() & friends.

In a local scan, this flags four additional RESOURCE_LEAKs and one
NULL_RETURNS.

The NULL_RETURNS is a false positive: Coverity can now see that
g_try_malloc(l1_sz * sizeof(uint64_t)) in
qcow2_check_metadata_overlap() may return NULL, but is too stupid to
recognize that a loop executing l1_sz times won't be entered then.

Three out of the four RESOURCE_LEAKs appear genuine.  The false
positive is in ppce500_prep_device_tree(): the pointer dies, but a
pointer to a struct member escapes, and we get the pointer back for
freeing with container_of().  Too funky for Coverity.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>

target-arm queue:
 * refactor/clean up armv7m_init()
 * some initial cleanup in the direction of supporting 64-bit EL3
 * fix broken synchronization of registers between QEMU and KVM
   for 32-bit ARM hosts (which among other things broke memory
   access via gdbstub)
 * fix flush-to-zero handling in FMULX, FRECPS, FRSQRTS and FRECPE
 * don't crash QEMU for UNPREDICTABLE BFI insns in A32 encoding
 * explain why virt board's device-to-transport mapping code is
   the way it is
 * implement mmu_idx values which match the architectural
   distinctions, and introduce the concept of a translation
   regime to get_phys_addr() rather than incorrectly looking
   at the current CPU state
 * update to upstream VIXL 1.7 (gives us correct code addresses
   when dissassembling pc-relative references)
 * sync system register state between KVM and QEMU for 64-bit ARM
 * support virtio on big-endian guests by implementing the
   "which endian is the guest now?" CPU method

# gpg: Signature made Thu 05 Feb 2015 14:02:16 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"

* remotes/pmaydell/tags/pull-target-arm-20150205: (28 commits)
  target-arm: fix for exponent comparison in recpe_f64
  target-arm: Guest cpu endianness determination for virtio KVM ARM/ARM64
  target-arm: KVM64: Get and Sync up guest register state like kvm32.
  disas/arm-a64.cc: Tell libvixl correct code addresses
  disas/libvixl: Update to upstream VIXL 1.7
  target-arm: Fix brace style in reindented code
  target-arm: Reindent ancient page-table-walk code
  target-arm: Use mmu_idx in get_phys_addr()
  target-arm: Pass mmu_idx to get_phys_addr()
  target-arm: Split AArch64 cases out of ats_write()
  target-arm: Don't define any MMU_MODE*_SUFFIXes
  target-arm: Use correct mmu_idx for unprivileged loads and stores
  target-arm: Define correct mmu_idx values and pass them in TB flags
  target-arm/translate-a64: Fix wrong mmu_idx usage for LDT/STT
  target-arm: Make arm_current_el() return sensible values for M profile
  cpu_ldst.h: Allow NB_MMU_MODES to be 7
  hw/arm/virt: explain device-to-transport mapping in create_virtio_devices()
  target-arm: check that LSB <= MSB in BFI instruction
  target-arm: Squash input denormals in FRECPS and FRSQRTS
  Fix FMULX not squashing denormalized inputs when FZ is set.
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

f64 exponent in HELPER(recpe_f64) should be compared to 2045 rather than 1023
(FPRecipEstimate in ARMV8 spec). This fixes incorrect underflow handling when
flushing denormals to zero in the FRECPE instructions operating on 64-bit
values.
Signed-off-by: NIldar Isaev <ild@inbox.ru>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This patch implements a fucntion pointer "virtio_is_big_endian"
from "CPUClass" structure for arm/arm64.
Function arm_cpu_is_big_endian() is added to determine and
return the guest cpu endianness to virtio.
This is required for running cross endian guests with virtio on ARM/ARM64.
Signed-off-by: NPranavkumar Sawargaonkar <pranavkumar@linaro.org>
Message-id: 1423130382-18640-3-git-send-email-pranavkumar@linaro.org
[PMM: check CPSR_E in env->cpsr_uncached, not env->pstate.]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This patch adds:
1. Call write_kvmstate_to_list() and write_list_to_cpustate()
   in kvm_arch_get_registers() to sync guest register state.
2. Call write_list_to_kvmstate() in kvm_arch_put_registers()
   to sync guest register state.

These changes are already there for kvm32 in target-arm/kvm32.c.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPranavkumar Sawargaonkar <pranavkumar@linaro.org>
Message-id: 1423130382-18640-2-git-send-email-pranavkumar@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

disassembling relative branches in code which doesn't reside at
what the guest CPU would think its execution address is. Use
the new MapCodeAddress() API to tell libvixl where the code is
from the guest CPU's point of view so it can get the target
addresses right.

Previous disassembly:

0x0000000040000000:  580000c0      ldr x0, pc+24 (addr 0x7f6cb7020434)
0x0000000040000004:  aa1f03e1      mov x1, xzr
0x0000000040000008:  aa1f03e2      mov x2, xzr
0x000000004000000c:  aa1f03e3      mov x3, xzr
0x0000000040000010:  58000084      ldr x4, pc+16 (addr 0x7f6cb702042c)
0x0000000040000014:  d61f0080      br x4

Fixed disassembly:
0x0000000040000000:  580000c0      ldr x0, pc+24 (addr 0x40000018)
0x0000000040000004:  aa1f03e1      mov x1, xzr
0x0000000040000008:  aa1f03e2      mov x2, xzr
0x000000004000000c:  aa1f03e3      mov x3, xzr
0x0000000040000010:  58000084      ldr x4, pc+16 (addr 0x40000020)
0x0000000040000014:  d61f0080      br x4
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1422274779-13359-3-git-send-email-peter.maydell@linaro.org

Update our copy of libvixl to upstream's 1.7 release.
This includes upstream's fix for the issue we had a local
patch for in commit 94cc44a9.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1422274779-13359-2-git-send-email-peter.maydell@linaro.org

This patch fixes the brace style in the code reindented in the
previous commit.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NGreg Bellows <greg.bellows@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

A few of the oldest parts of the page-table-walk code have broken indent
(either hardcoded tabs or two-spaces). Reindent these sections.

For ease of review, this patch does not touch the brace style and
so is a whitespace-only change.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NGreg Bellows <greg.bellows@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

Now we have the mmu_idx in get_phys_addr(), use it correctly to
determine the behaviour of virtual to physical address translations,
rather than using just an is_user flag and the current CPU state.

Some TODO comments have been added to indicate where changes will
need to be made to add EL2 and 64-bit EL3 support.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NGreg Bellows <greg.bellows@linaro.org>

Make all the callers of get_phys_addr() pass it the correct
mmu_idx rather than just a simple "is_user" flag. This includes
properly decoding the AT/ATS system instructions; we include the
logic for handling all the opc1/opc2 cases because we'll need
them later for supporting EL2/EL3, even if we don't have the
regdef stanzas yet.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NGreg Bellows <greg.bellows@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

Instead of simply reusing ats_write() as the handler for both AArch32
and AArch64 address translation operations, use a different function
for each with the common code in a third function. This is necessary
because the semantics for selecting the right translation regime are
different; we are only getting away with sharing currently because
we don't support EL2 and only support EL3 in AArch32.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NGreg Bellows <greg.bellows@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

target-arm doesn't use any of the MMU-mode specific cpu ldst
accessor functions. Suppress their generation by not defining
any of the MMU_MODE*_SUFFIX macros. ("user" and "kernel" are
too simplistic as descriptions of indexes 0 and 1 anyway.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NGreg Bellows <greg.bellows@linaro.org>
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>

The MMU index to use for unprivileged loads and stores is more
complicated than we currently implement:
 * for A64, it should be "if at EL1, access as if EL0; otherwise
   access at current EL"
 * for A32/T32, it should be "if EL2, UNPREDICTABLE; otherwise
   access as if at EL0".

In both cases, if we want to make the access for Secure EL0
this is not the same mmu_idx as for Non-Secure EL0.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NGreg Bellows <greg.bellows@linaro.org>