- 22 7月, 2011 4 次提交
-
-
由 Michael Roth 提交于
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@gmail.com>
-
由 Michael Roth 提交于
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@gmail.com>
-
由 Michael Roth 提交于
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@gmail.com>
-
由 Anthony Liguori 提交于
GLib is an extremely common library that has a portable thread implementation along with tons of other goodies. GLib and GObject have a fantastic amount of infrastructure we can leverage in QEMU including an object oriented programming infrastructure. Short term, it has a very nice thread pool implementation that we could leverage in something like virtio-9p. It also has a test harness implementation that this series will use. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@gmail.com>
-
- 14 6月, 2011 1 次提交
-
-
由 Alon Levy 提交于
No flag to configure is required. Instead, added a libcacard.la target that is not built by default, only when requested explicitly via: mkdir build cd build ../configure make libcacard.la make install-libcacard Uses libtool to do actual linking of object files and shared library, and installing. Tested only under linux, but supposed to work on other systems as well. If libtool isn't found you get a message complaining about that, only at build time (since it is not a default target I did not add a message at configure time). New build artifacts: .libs subdirectories (at <buildroot> and <buildroot>/libcacard) *.lo files (at same locations as the respective o files) Added %.lo : %.c rule that uses libtool. Updated clean rule to clean up those artifacts. Added specific rule to call dtrace with libtool wrapper (note that because of a current upstream dtrace bug fixed by systemtap b1568fd85 commit the -fPIC flag isn't actually passed on. still current dtrace+libtool produced object links fine). If libtool is missing any of the following targets will complain and exit 1: any subdir: *.lo root and libcacard: libcacard.la, libcacard-instsall Tested to link and load with all tracing backends.
-
- 08 6月, 2011 1 次提交
-
-
由 Anthony Liguori 提交于
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 03 6月, 2011 1 次提交
-
-
由 Alexander Graf 提交于
We don't install mpc8544ds.dtb, which means that -M mpc8544ds doesn't work when installed. Fix it by installing the file. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 01 6月, 2011 1 次提交
-
-
由 Alon Levy 提交于
No flag to configure is required. Instead, added a libcacard.la target that is not built by default, only when requested explicitly via: mkdir build cd build ../configure make libcacard.la make install-libcacard Uses libtool to do actual linking of object files and shared library, and installing. Tested only under linux, but supposed to work on other systems as well. If libtool isn't found you get a message complaining about that, only at build time (since it is not a default target I did not add a message at configure time). New build artifacts: .libs subdirectories (at <buildroot> and <buildroot>/libcacard) *.lo files (at same locations as the respective o files) Added %.lo : %.c rule that uses libtool. Updated clean rule to clean up those artifacts. Added specific rule to call dtrace with libtool wrapper (note that because of a current upstream dtrace bug fixed by systemtap b1568fd85 commit the -fPIC flag isn't actually passed on. still current dtrace+libtool produced object links fine). If libtool is missing any of the following targets will complain and exit 1: any subdir: *.lo root and libcacard: libcacard.la, libcacard-instsall Tested to link and load with all tracing backends.
-
- 08 5月, 2011 1 次提交
-
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Cc: qemu-trivial@nongnu.org Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
-
- 19 4月, 2011 1 次提交
-
-
由 Alex Williamson 提交于
And add missing ROMs to tarbin build target. Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
-
- 16 4月, 2011 1 次提交
-
-
由 Brad Hards 提交于
Signed-off-by: NBrad Hards <bradh@frogmouth.net> Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
-
- 02 4月, 2011 4 次提交
-
-
由 Robert Relyea 提交于
libcacard emulates a Common Access Card (CAC) which is a standard for smartcards. It is used by the emulated ccid card introduced in a following patch. Docs are available in docs/libcacard.txt Signed-off-by: NAlon Levy <alevy@redhat.com> --- changes from v24->v25: * Fix out of tree builds. * Fix build with linux-user targets. changes from v23->v24: (Jes Sorensen review 2) * Makefile.target: use obj-$(CONFIG_*) += * remove unrequired includes, include qemu-common before qemu-thread * required adding #define NO_NSPR_10_SUPPORT (harmless) changes from v22->v23: * configure fixes: (reported by Stefan Hajnoczi) * test a = b, not a == b (second isn't portable) * quote $source_path in case it contains spaces - this doesn't really help since there are many other places that need similar fixes, not introduced by this patch. changes from v21->v22: * fix configure to not link libcacard if nss not found (reported by Stefan Hajnoczi) * fix vscclient linkage with simpletrace backend (reported by Stefan Hajnoczi) * card_7816.c: add missing break in ERROR_DATA_NOT_FOUND (reported by William van de Velde) changes from v20->v21: (Jes Sorensen review) * use qemu infrastructure: qemu-thread, qemu-common (qemu_malloc and qemu_free), error_report * assert instead of ASSERT * cosmetic fixes * use strpbrk and isspace * add --disable-nss --enable-nss here, instead of in the final patch. * split vscclient, passthru and docs to following patches. changes from v19->v20: * checkpatch.pl changes from v15->v16: Build: * don't erase self with distclean * fix make clean after make distclean * Makefile: make vscclient link quiet Behavioral: * vcard_emul_nss: load coolkey in more situations * vscclient: * use hton,ntoh * send init on connect, only start vevent thread on response * read payload after header check, before type switch * remove Reconnect * update for vscard_common changes, empty Flush implementation Style/Whitespace: * fix wrong variable usage * remove unused variable * use only C style comments * add copyright header * fix tabulation Signed-off-by: NAlon Levy <alevy@redhat.com> libcacard: fix out of tree builds
-
由 Alon Levy 提交于
-
由 David Gibson 提交于
Currently, the emulated pSeries machine requires the use of the -kernel parameter in order to explicitly load a guest kernel. This means booting from the virtual disk, cdrom or network is not possible. This patch addresses this limitation by inserting a within-partition firmware image (derived from the "SLOF" free Open Firmware project). If -kernel is not specified, qemu will now load the SLOF image, which has access to the qemu boot device list through the device tree, and can boot from any of the usual virtual devices. In order to support the new firmware, an extension to the emulated machine/hypervisor is necessary. Unlike Linux, which expects multi-CPU entry to be handled kexec() style, the SLOF firmware expects only one CPU to be active at entry, and to use a hypervisor RTAS method to enable the other CPUs one by one. This patch also implements this 'start-cpu' method, so that SLOF can start the secondary CPUs and marshal them into the kexec() holding pattern ready for entry into the guest OS. Linux should, and in the future might directly use the start-cpu method to enable initially disabled CPUs, but for now it does require kexec() entry. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NDavid Gibson <dwg@au1.ibm.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 David Gibson 提交于
On pSeries machines, operating systems can instantiate "RTAS" (Run-Time Abstraction Services), a runtime component of the firmware which implements a number of low-level, infrequently used operations. On logical partitions under a hypervisor, many of the RTAS functions require hypervisor privilege. For simplicity, therefore, hypervisor systems typically implement the in-partition RTAS as just a tiny wrapper around a hypercall which actually implements the various RTAS functions. This patch implements such a hypercall based RTAS for our emulated pSeries machine. A tiny in-partition "firmware" calls a new hypercall, which looks up available RTAS services in a table. Signed-off-by: NDavid Gibson <dwg@au1.ibm.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 16 3月, 2011 1 次提交
-
-
由 Michal Simek 提交于
Add the first Microblaze little endian platform. Platform uses uart16550, axi ethernet, timer, intc. Signed-off-by: NMichal Simek <monstr@monstr.eu> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@petalogix.com>
-
- 21 1月, 2011 1 次提交
-
-
由 Blue Swirl 提交于
Move build and user scripts into scripts directory. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 09 12月, 2010 1 次提交
-
-
由 Gerd Hoffmann 提交于
Just compiled from vgabios git repo @ git.qemu.org, copyed over and committed. Also added to the list of blobs in the Makefile. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
- 27 11月, 2010 2 次提交
-
-
由 Paul Brook 提交于
Allow default configs to be split into several files. Signed-off-by: NPaul Brook <paul@codesourcery.com>
-
由 Paul Brook 提交于
Teach Makefile that cmd.o depends on a generated header (specifically config-host.h). Signed-off-by: NPaul Brook <paul@codesourcery.com>
-
- 22 11月, 2010 1 次提交
-
-
由 Stefan Weil 提交于
Patching the rom data during load (in qemu) now also supports i82801 (which had no rom file). We only need a single rom file for the whole device family, so remove the second one which is no longer needed. Cc: Markus Armbruster <armbru@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
- 21 11月, 2010 3 次提交
-
-
由 Luiz Capitulino 提交于
Commit b152aa84 broke the unit-tests build, fix it. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Daniel P. Berrange 提交于
This introduces a new tracing backend that targets the SystemTAP implementation of DTrace userspace tracing. The core functionality should be applicable and standard across any DTrace implementation on Solaris, OS-X, *BSD, but the Makefile rules will likely need some small additional changes to cope with OS specific build requirements. This backend builds a little differently from the other tracing backends. Specifically there is no 'trace.c' file, because the 'dtrace' command line tool generates a '.o' file directly from the dtrace probe definition file. The probe definition is usually named with a '.d' extension but QEMU uses '.d' files for its external makefile dependancy tracking, so this uses '.dtrace' as the extension for the probe definition file. The 'tracetool' program gains the ability to generate a trace.h file for DTrace, and also to generate the trace.d file containing the dtrace probe definition. Example usage of a dtrace probe in systemtap looks like: probe process("qemu").mark("qemu_malloc") { printf("Malloc %d %p\n", $arg1, $arg2); } * .gitignore: Ignore trace-dtrace.* * Makefile: Extra rules for generating DTrace files * Makefile.obj: Don't build trace.o for DTrace, use trace-dtrace.o generated by 'dtrace' instead * tracetool: Support for generating DTrace data files Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NDaniel P. Berrange <berrange@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
This reverts commit 4addb112.
-
- 17 11月, 2010 1 次提交
-
-
由 Luiz Capitulino 提交于
Commit b152aa84 broke the unit-tests build, fix it. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
- 16 11月, 2010 2 次提交
-
-
由 Daniel P. Berrange 提交于
This introduces a new tracing backend that targets the SystemTAP implementation of DTrace userspace tracing. The core functionality should be applicable and standard across any DTrace implementation on Solaris, OS-X, *BSD, but the Makefile rules will likely need some small additional changes to cope with OS specific build requirements. This backend builds a little differently from the other tracing backends. Specifically there is no 'trace.c' file, because the 'dtrace' command line tool generates a '.o' file directly from the dtrace probe definition file. The probe definition is usually named with a '.d' extension but QEMU uses '.d' files for its external makefile dependancy tracking, so this uses '.dtrace' as the extension for the probe definition file. The 'tracetool' program gains the ability to generate a trace.h file for DTrace, and also to generate the trace.d file containing the dtrace probe definition. Example usage of a dtrace probe in systemtap looks like: probe process("qemu").mark("qemu_malloc") { printf("Malloc %d %p\n", $arg1, $arg2); } * .gitignore: Ignore trace-dtrace.* * Makefile: Extra rules for generating DTrace files * Makefile.obj: Don't build trace.o for DTrace, use trace-dtrace.o generated by 'dtrace' instead * tracetool: Support for generating DTrace data files Signed-off-by: NDaniel P. Berrange <berrange@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Gerd Hoffmann 提交于
aliguori: update VGA BIOS Signed-off-by: NGerd Hoffmann <kraxel@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 02 11月, 2010 1 次提交
-
-
由 Blue Swirl 提交于
df2943ba broke out of tree build. Fix breakage by adding $(SRC_PATH). Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 30 10月, 2010 1 次提交
-
-
由 Jes Sorensen 提交于
This moves library functions used by both QEMU and the QEMU tools, such as qemu-img, qemu-nbd etc. from osdep.c to oslib-{posix,win32}.c In addition it introduces oslib-obj.y to the Makefile set to be included by the various targets, instead of relying on these library functions magically getting included via block-obj-y. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 28 10月, 2010 1 次提交
-
-
由 Michael S. Tsirkin 提交于
All files include qemu-options.h which pulls in qemu-options.def from the root directory. Thus generating qemu-options.def from Makefile.objs under the target directory is not effective. Further, people expect .def file to get cleaned with make clean: it does not have state so no reason to defer removing it until distclean. Also add a rule to remove old files that might be around. This fixes the error: ‘QEMU_OPTION_spice’ undeclared (first use in this function) error that some people reported which is really down to an out of date .def file. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
- 23 10月, 2010 1 次提交
-
-
由 Blue Swirl 提交于
Move timer init functions to a new file, qemu-timer-common.c. Make other critical timer functions inlined to preserve performance in qemu-timer.c, also move muldiv64() (used by the inline functions) to qemu-timer.h. Adjust block/raw-posix.c and simpletrace.c to use get_clock() directly. Remove a similar/duplicate definition in qemu-tool.c. Adjust hw/omap_clk.c to include qemu-timer.h because muldiv64() is used there. After this change, tracing can be used also for user code and simpletrace on Win32. Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 22 10月, 2010 1 次提交
-
-
由 Jan Kiszka 提交于
qemu_malloc instrumentations require linking against the trace objects. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Acked-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
- 14 10月, 2010 1 次提交
-
-
由 Blue Swirl 提交于
Only Mac-on-Linux stuff used video.x, OpenBIOS does not need it. Remove video.x MoL hacks. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 09 10月, 2010 1 次提交
-
-
由 Blue Swirl 提交于
'make clean' did not remove trace.[ch]-timestamp files, only trace.[ch]. But 'make' did not know how to make trace.[ch] files if the timestamp files were present. Fix by removing the timestamp files along with trace.[ch]. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 02 10月, 2010 2 次提交
-
-
由 Blue Swirl 提交于
Add logic to detect changes in generated files. If the old and new files are identical, don't touch the generated file. This avoids a lot of churn since many files depend on trace.h. Based on suggestion by Paolo Bonzini. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Blue Swirl 提交于
The logic of detecting changes in default-configs/*.mak is flawed as can be demonstrated by 'touch default-configs/*.mak' followed by make. This results in a message claiming that user made changes to the */config-devices.mak files. Fix by separating the detection of changes made by the user and changes in the default-configs. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 01 10月, 2010 2 次提交
-
-
由 Luiz Capitulino 提交于
Let's be consistent and call it hmp-commands.hx, so that we have qmp-commands.hx for QMP and hmp-commands.hx for HMP. Please, note that this commit doesn't touch qemu-monitor.texi. All texi files have the qemu- prefix and I don't think it's worth changing that. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
This file contains a copy of the following information from the qemu-monitor.hx file: o QObject handlers entries o QMP documentation (all SQMP/EQMP sections) Right now it's only used to generate the QMP docs in QMP/, but next commits will turn this into QMP's command dispatch table. It's important to note that QObject handlers entries are going to get duplicated: they will exist in both QMP's and HMP's dispatch tables. This will be fixed in the near future, when we add a proper QMP call interface and HMP is converted to use it. This way we can completely drop QObject handlers entries from HMP's tables. NOTE: HMP specific constructions, like "q|quit", have been dropped. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
- 27 9月, 2010 1 次提交
-
-
由 Blue Swirl 提交于
Add QEMU version information to the executables, based on earlier work by C. W. Betts and Robert Riebisch. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 22 9月, 2010 1 次提交
-
-
由 Andreas Färber 提交于
On a clean build, after generating trace.h, make would recurse into *-*-user without a clue how to build ../trace.o (added to $(obj-y) in Makefile.target) since its generation rule is in the main Makefile. The softmmus are seemingly unaffected because the $(TOOLS), which each have a dependency on $(trace-obj-y), are built first for the build-all target. Add a dependency on $(trace-obj-y) for %-user, as done for the qemu-* tools. Let's be paranoid and do the same for %-softmmu while at it, just in case someone messes with $(TOOLS) or calls the Makefile target directly. Signed-off-by: NAndreas Färber <andreas.faerber@web.de> Acked-by: NStefan Weil <weil@mail.berlios.de> Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Cc: Prerna Saxena <prerna@linux.vnet.ibm.com> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-