Use the appropriate interface instead.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Prevent disk data loss when closing qemu console window
under Windows 7.

v3. Comment for Sleep() parameter was updated.

Signed-off-by: Pavel Dovgalyuk<pavel.dovgaluk@gmail.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NMORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Writeback caching was added in Ceph 0.46, and writethrough will be in
0.47. These are controlled by general config options, so there's no
need to check for librbd version.
Signed-off-by: NJosh Durgin <josh.durgin@inktank.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>

When any inconsistencies have been fixed, print the statistics and run
another check to make sure everything is correct now.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

The QED block driver already provides the functionality to not only
detect inconsistencies in images, but also fix them. However, this
functionality cannot be manually invoked with qemu-img, but the
check happens only automatically during bdrv_open().

This adds a -r switch to qemu-img check that allows manual invocation
of an image repair.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This should fix the following build failure:

/home/buildbot/slave-public/block_mingw32/build/hw/xtensa_lx60.c: In function 'lx_init':
/home/buildbot/slave-public/block_mingw32/build/hw/xtensa_lx60.c:212: warning: implicit declaration of function 'drive_get'
/home/buildbot/slave-public/block_mingw32/build/hw/xtensa_lx60.c:212: warning: nested extern declaration of 'drive_get'
/home/buildbot/slave-public/block_mingw32/build/hw/xtensa_lx60.c:212: error: 'IF_PFLASH' undeclared (first use in this function)
/home/buildbot/slave-public/block_mingw32/build/hw/xtensa_lx60.c:212: error: (Each undeclared identifier is reported only once
/home/buildbot/slave-public/block_mingw32/build/hw/xtensa_lx60.c:212: error: for each function it appears in.)
/home/buildbot/slave-public/block_mingw32/build/hw/xtensa_lx60.c:216: error: dereferencing pointer to incomplete type
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Make the code reusable.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

is_allocated_base has complex semantics that are not really usable
outside streaming.  Split the check in two parts, where the allocated
state for the top bs is moved to the caller.  The resulting function
is more generally useful.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Either FIEMAP, or SEEK_DATA+SEEK_HOLE can be used to implement the
is_allocated callback for raw files.  On Linux ext4, btrfs and XFS
all support it.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Commit 3948d1d4 removed the pointer argument we filled in with l2_offset
but forgot to remove the unnecessary l2_offset assignment.
Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Some gcc versions seem not to be able to figure out that the switch
statement covers all possible values and that c is therefore always
initialised. Add a default branch for them.
Reported-by: Nmalc <av1474@comtv.ru>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: Nmalc <av1474@comtv.ru>

- The M-flag is encoded in different bits on cris v10 and cris v32.
Signed-off-by: NLars Persson <larper@axis.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Changed device name to xlnx,axi-dma. This is the exact name of the device in the
Xilinx EDK development tools.
Signed-off-by: NPeter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Changed device name to xlnx,axi-ethernet. This is the exact name of the
device in the xilinx EDK development tools.
Signed-off-by: NPeter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Even though the xilinx tools do have C_ on all params by default, drop this
for consistency with all the other xilinx IP (I.E. param names are the xilinx
names without the C_ prefix)
Signed-off-by: NPeter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Changed device name to xlnx,xps-ethernetlite. This is the exact name of the
device in the xilinx EDK development tools.
Signed-off-by: NPeter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Changed "txpingpong" prop to "tx-ping-pong". Same for rx. This is done to
make the property name exactly match what is output by the xilinx tools for
this IP.
Signed-off-by: NPeter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Changed device name to xlnx,xps-intc. This is the exact name of the device
in the xilinx EDK development tools.
Signed-off-by: NPeter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Changed device name to xlnx,xps-timer. This is the exact name of the device
in the xilinx EDK development tools.
Signed-off-by: NPeter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

The configurable property for this IP in the Xilinx tools is a boolean switch
"one-timer-only" that flicks this timer from being dual channel to single.
Updated QEMU to work the same way for better match with the IP core and its TRM.
Signed-off-by: NPeter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Added a reasonable default frequency for the xilinx timer (the 62MHz from
s3adsp machine model).
Signed-off-by: NPeter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Changed device name to xlnx,xps-uartlite. This is the exact name of the device
in the xilinx EDK development tools.
Signed-off-by: NPeter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

The axidma irq orders are reversed in both the device model and the instantion.
Undid both reversal (for no net change). Also needs to be reversed for
consistency with Xilinx tools IRQ listing.
Signed-off-by: NPeter A. G. Crosthwaite <peter.crosthwaite@petalogix.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Speeds up the build.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Add #ifdef to avoid complaint about use of poisoned "env".
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Speeds up the build.

xilinx_ethlite uses tswap32() and is thus target-dependent.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Still no retb
Signed-off-by: NEdgar E. Iglesias <edgar@axis.com>

* qemu-kvm/uq/master:
  kvm: i8254: Fix conversion of in-kernel to userspace state
  kvm/apic: correct short memset

* sstabellini/for_1.1.1:
  qemu/xendisk: set maximum number of grants to be used

* afaerber-or/qom-cpu-3a: (27 commits)
  target-s390x: Pass S390CPU to s390_cpu_restart()
  s390-virtio: Let s390_cpu_addr2state() return S390CPU
  s390-virtio: Use cpu_s390x_init() to obtain S390CPU
  target-s390x: Let cpu_s390x_init() return S390CPU
  xen_machine_pv: Use cpu_x86_init() to obtain X86CPU
  arm_pic: Pass ARMCPU to arm_pic_init_cpu()
  arm_boot: Pass ARMCPU to arm_load_kernel()
  xilinx_zynq: Use cpu_arm_init() to obtain ARMCPU
  pxa2xx_gpio: Store ARMCPU in PXA2xxGPIOInfo
  pxa2xx_pic: Store ARMCPU in PXA2xxPICState
  pxa2xx: Pass ARMCPU to pxa2xx_pic_init()
  exynos4210: Use cpu_arm_init() to store ARMCPU
  vexpress: Use cpu_arm_init() to obtain ARMCPU
  realview: Use cpu_arm_init() to obtain ARMCPU
  arm_boot: Pass ARMCPU to arm_boot_info::secondary_cpu_reset_hook()
  arm_boot: Pass ARMCPU to arm_boot_info::write_secondary_boot()
  versatilepb: Use cpu_arm_init() to obtain ARMCPU
  musicpal: Use cpu_arm_init() to obtain ARMCPU
  integratorcp: Use cpu_arm_init() to obtain ARMCPU
  strongarm: Use cpu_arm_init() to store ARMCPU in StrongARMState
  ...

* afaerber-or/qom-next-1:
  target-i386: Use uint32 visitor for [x]level properties
  qdev: Remove PropertyInfo range checking
  qdev: Switch property accessors to fixed-width visitor interfaces
  qdev: Use int32_t container for devfn property
  qapi: Add String visitor coverage to serialization unit tests
  qapi: String visitor, use %f representation for floats
  qapi: Unit tests for visitor-based serialization
  qapi: Add Visitor interfaces for uint*_t and int*_t

* stefanha/trivial-patches:
  configure: report missing libraries for virtfs
  trace/simple.c: fix deprecated glib2 interface
  Clarify comments of tb_invalidate_phys_[page_]range