- 16 9月, 2011 3 次提交
-
-
由 Luiz Capitulino 提交于
Use runstate_is_running() instead, which is introduced by this commit. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Test against RSTATE_IN_MIGRATE instead. Please, note that the RSTATE_IN_MIGRATE state is only set when all the initial VM setup is done, while 'incoming_expected' was set right in the beginning when parsing command-line options. Shouldn't be a problem as far as I could check. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
Today, when notifying a VM state change with vm_state_notify(), we pass a VMSTOP macro as the 'reason' argument. This is not ideal because the VMSTOP macros tell why qemu stopped and not exactly what the current VM state is. One example to demonstrate this problem is that vm_start() calls vm_state_notify() with reason=0, which turns out to be VMSTOP_USER. This commit fixes that by replacing the VMSTOP macros with a proper state type called RunState. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
- 09 9月, 2011 1 次提交
-
-
由 Nathan Kunkee 提交于
This patch fixes the spacing of the PC output from 'info cpus' for SPARC. Signed-off-by: NNathan Kunkee <nkunkee42@hotmail.com> Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
-
- 01 9月, 2011 3 次提交
-
-
由 Lluís 提交于
The current interface is generic for this small set of operations, and thus other backends can easily modify the "trace/control.c" file to add their own implementation. Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
-
由 Lluís 提交于
Generalize the 'st_print_trace_events' and 'st_change_trace_event_state' into backend-specific 'trace_print_events' and 'trace_event_set_state' (respectively) in the "trace/control.h" file. Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu>
-
由 Lluís 提交于
Provides a more hierarchical view of the variable domain. Also adds the CONFIG_TRACE_* variables for all backends. [Stefan added missing 'test' in stap if statement] Signed-off-by: NLluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
-
- 25 8月, 2011 1 次提交
-
-
由 Jamie Iles 提交于
Commit c62f6d1d (monitor: fix build breakage with --disable-vnc) conditionalised some VNC setup code but left an unused variable. Move the variable into the conditional code to fix the build breakage. Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: NJamie Iles <jamie@jamieiles.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
- 22 8月, 2011 7 次提交
-
-
由 Anthony Liguori 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Austin Clements 提交于
This is the same fix that was recently applied to info mem. Before this change, info tlb output looked like: ffffffffffffc000: 000000000fffc000 --------W ffffffffffffd000: 000000000fffd000 --------W ffffffffffffe000: 000000000fffe000 --------W fffffffffffff000: 000000000ffff000 --------W With this change, it looks like 00000000ffffc000: 000000000fffc000 --------W 00000000ffffd000: 000000000fffd000 --------W 00000000ffffe000: 000000000fffe000 --------W 00000000fffff000: 000000000ffff000 --------W Signed-off-by: NAustin Clements <amdragon@mit.edu> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Austin Clements 提交于
Previously, "info mem" considered and displayed only the last-level protection bits for a memory range, which doesn't accurrately represent the protection of that range. Now it shows the combined protection. Signed-off-by: NAustin Clements <amdragon@mit.edu> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Austin Clements 提交于
"info mem" groups its output into contiguous ranges with identical protection bits, but previously forgot to print the last range. Signed-off-by: NAustin Clements <amdragon@mit.edu> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Austin Clements 提交于
Previously, on 32-bit i386, info mem used signed 32-bit int's to store the page table indexes. As a result, address calculation was done in 32 bits and then incorrectly sign-extended to 64 bits, yielding output like ffffffffef000000-ffffffffef031000 0000000000031000 ur- ffffffffef7bc000-ffffffffef7bd000 0000000000001000 urw ffffffffef7bd000-ffffffffef7be000 0000000000001000 ur- This makes these indexes unsigned, which yields correct output 00000000ef000000-00000000ef031000 0000000000031000 ur- 00000000ef7bc000-00000000ef7bd000 0000000000001000 urw 00000000ef7bd000-00000000ef7be000 0000000000001000 ur- Signed-off-by: NAustin Clements <amdragon@mit.edu> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 21 8月, 2011 1 次提交
-
-
由 Anthony Liguori 提交于
qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 29 7月, 2011 1 次提交
-
-
由 TeLeMan 提交于
The breakage was introduced by the commit 13661089Signed-off-by: NTeLeMan <geleman@gmail.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 24 7月, 2011 1 次提交
-
-
由 Daniel P. Berrange 提交于
Allow client connections for VNC and socket based character devices to be passed in over the monitor using SCM_RIGHTS. One intended usage scenario is to start QEMU with VNC on a UNIX domain socket. An unprivileged user which cannot access the UNIX domain socket, can then connect to QEMU's VNC server by passing an open FD to libvirt, which passes it onto QEMU. { "execute": "get_fd", "arguments": { "fdname": "myclient" } } { "return": {} } { "execute": "add_client", "arguments": { "protocol": "vnc", "fdname": "myclient", "skipauth": true } } { "return": {} } In this case 'protocol' can be 'vnc' or 'spice', or the name of a character device (eg from -chardev id=XXXX) The 'skipauth' parameter can be used to skip any configured VNC authentication scheme, which is useful if the mgmt layer talking to the monitor has already authenticated the client in another way. * console.h: Define 'vnc_display_add_client' method * monitor.c: Implement 'client_add' command * qemu-char.c, qemu-char.h: Add 'qemu_char_add_client' method * qerror.c, qerror.h: Add QERR_ADD_CLIENT_FAILED * qmp-commands.hx: Declare 'client_add' command * ui/vnc.c: Implement 'vnc_display_add_client' method Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 27 6月, 2011 1 次提交
-
-
由 Blue Swirl 提交于
Most exec-all.h include directives are now useless, remove them. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 01 6月, 2011 2 次提交
-
-
由 Luiz Capitulino 提交于
This **CHANGES** the human monitor "nmi" command behavior. Currently it accepts an CPU argument which, when provided, will send the NMI to the specified CPU. This feature is of discussable value though and HMP shouldn't have more features than QMP, so let's use QMP's instead (it's also simpler). Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Lai Jiangshan 提交于
inject-nmi command injects an NMI on all CPUs of guest. It is only supported for x86 guest currently, it will returns "Unsupported" error for non-x86 guest. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
- 10 5月, 2011 1 次提交
-
-
由 Scott Wood 提交于
Read them via KVM_GET_SREGS in kvm_arch_get_registers(), and display them in "info registers". Also get CR and PID from the existing KVM_GET_REGS. Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 13 4月, 2011 2 次提交
-
-
由 Stefan Weil 提交于
Using cpu_physical_memory_read, cpu_physical_memory_write and ldub_phys improves readability and allows removing some type casts. lduw_phys and ldl_phys were not used because both require aligned addresses. Therefore it is not possible to simply replace existing calls by one of these functions. Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Stefan Weil 提交于
All other type casts in calls of cpu_physical_memory_read are used by hardware emulations and will be fixed by separate patches. Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
- 02 4月, 2011 1 次提交
-
-
由 David Gibson 提交于
On ppc machines with hash table MMUs, the special purpose register SDR1 contains both the base address of the encoded size (hashed) page tables. At present, we interpret the SDR1 value within the address translation path. But because the encodings of the size for 32-bit and 64-bit are different this makes for a confusing branch on the MMU type with a bunch of curly shifts and masks in the middle of the translate path. This patch cleans things up by moving the interpretation on SDR1 into the helper function handling the write to the register. This leaves a simple pre-sanitized base address and mask for the hash table in the CPUState structure which is easier to work with in the translation path. This makes the translation path more readable. It addresses the FIXME comment currently in the mtsdr1 helper, by validating the SDR1 value during interpretation. Finally it opens the way for emulating a pSeries-style partition where the hash table used for translation is not mapped into the guests's RAM. Signed-off-by: NDavid Gibson <dwg@au1.ibm.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 22 3月, 2011 1 次提交
-
-
由 Jes Sorensen 提交于
Per default VNC is enabled. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 21 3月, 2011 1 次提交
-
-
由 Paolo Bonzini 提交于
This was done with: sed -i 's/qemu_get_clock\>/qemu_get_clock_ns/' \ $(git grep -l 'qemu_get_clock\>' ) sed -i 's/qemu_new_timer\>/qemu_new_timer_ns/' \ $(git grep -l 'qemu_new_timer\>' ) after checking that get_clock and new_timer never occur twice on the same line. There were no missed occurrences; however, even if there had been, they would have been caught by the compiler. There was exactly one false positive in qemu_run_timers: - current_time = qemu_get_clock (clock); + current_time = qemu_get_clock_ns (clock); which is of course not in this patch. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 17 3月, 2011 1 次提交
-
-
由 Jan Kiszka 提交于
Based on patch by Glauber Costa: To allow management applications like libvirt to apply CPU affinities to the VCPU threads, expose their ID via info cpus. This patch provides the pre-existing and used interface from qemu-kvm. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 15 3月, 2011 3 次提交
-
-
由 Jan Kiszka 提交于
Allow to tell cpu_x86_inject_mce that it should ignore Action Optional MCE events when the target VCPU is still processing another one. This will be used by KVM soon. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> CC: Huang Ying <ying.huang@intel.com> CC: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> CC: Jin Dongming <jin.dongming@np.css.fujitsu.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Jan Kiszka 提交于
As this service is used by the human monitor, make sure that errors get reported to the right channel, and also raise the verbosity. This requires to move Monitor typedef in qemu-common.h to resolve the include dependency. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> CC: Huang Ying <ying.huang@intel.com> CC: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> CC: Jin Dongming <jin.dongming@np.css.fujitsu.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Jan Kiszka 提交于
Fix some code style issues, use proper headers, and align to cpu_x86 naming scheme. No functional changes. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> CC: Huang Ying <ying.huang@intel.com> CC: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> CC: Jin Dongming <jin.dongming@np.css.fujitsu.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 14 2月, 2011 1 次提交
-
-
由 Jan Kiszka 提交于
Define and use dedicated constants for vm_stop reasons, they actually have nothing to do with the EXCP_* defines used so far. At this chance, specify more detailed reasons so that VM state change handlers can evaluate them. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 02 2月, 2011 2 次提交
-
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
commit 52c18be9 introduced a regression in the change vnc password command that changed the behavior of setting the VNC password to an empty string from disabling login to disabling authentication. This commit refactors the code to eliminate this overloaded semantics in vnc_display_password and instead introduces the vnc_display_disable_login. The monitor implementation then determines the behavior of an empty or missing string. Recently, a set_password command was added that allows both the Spice and VNC password to be set. This command has not shown up in a release yet so the behavior is not yet defined. This patch proposes that an empty password be treated as an empty password with no special handling. For specifically disabling login, I believe a new command should be introduced instead of overloading semantics. I'm not sure how Spice handles this but I would recommend that we have Spice and VNC have consistent semantics here for the 0.14.0 release. Reported-by: NNeil Wilson <neil@aldur.co.uk> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> --- v1 -> v2 - Add a proper return to make sure that login is really disabled instead of relying on the VNC server to treat empty passwords specially
-
- 25 1月, 2011 1 次提交
-
-
由 Isaku Yamahata 提交于
use after free in do_wav_capture() on the error path. Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
- 24 1月, 2011 3 次提交
-
-
由 Marc-André Lureau 提交于
-
由 Gerd Hoffmann 提交于
Handle spice client migration, i.e. inform a spice client connected about the new host and connection parameters, so it can move over the connection automatically. The monitor command has a not-yet used protocol argument simliar to set_password and expire_password commands. This allows to add a simliar feature to vnc in the future. Daniel Berrange plans to work on this. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Jes Sorensen 提交于
strtosz() needs to return a 64 bit type even on 32 bit architectures. Otherwise qemu-img will fail to create disk images >= 2GB Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 22 1月, 2011 1 次提交
-
-
由 Jin Dongming 提交于
When the following test case is injected with mce command, maybe user could not get the expected result. DATA command cpu bank status mcg_status addr misc (qemu) mce 1 1 0xbd00000000000000 0x05 0x1234 0x8c Expected Result panic type: "Fatal Machine check" That is because each mce command can only inject the given cpu and could not inject mce interrupt to other cpus. So user will get the following result: panic type: "Fatal machine check on current CPU" "broadcast" option is used for injecting dummy data into other cpus. Injecting mce with this option the expected result could be gotten. Usage: Broadcast[on] command broadcast cpu bank status mcg_status addr misc (qemu) mce -b 1 1 0xbd00000000000000 0x05 0x1234 0x8c Broadcast[off] command cpu bank status mcg_status addr misc (qemu) mce 1 1 0xbd00000000000000 0x05 0x1234 0x8c Signed-off-by: NJin Dongming <jin.dongming@np.css.fujitsu.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
- 15 1月, 2011 1 次提交
-
-
由 Blue Swirl 提交于
Fix usage of wrong variable, spotted by clang: /src/qemu/monitor.c:2278:36: warning: The left operand of '&' is a garbage value prot = pde & (PG_USER_MASK | PG_RW_MASK | Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-