- 26 1月, 2013 1 次提交
-
-
由 Andreas Färber 提交于
Signed-off-by: NAndreas Färber <afaerber@suse.de> [agraf: squash in MAINTAINERS fix] Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 17 12月, 2012 1 次提交
-
-
由 Michael S. Tsirkin 提交于
update all users so we can remove the makefile hack. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
- 23 10月, 2012 1 次提交
-
-
由 Avi Kivity 提交于
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are reserved) and its purpose doesn't match the name (most target_phys_addr_t addresses are not target specific). Replace it with a finger-friendly, standards conformant hwaddr. Outstanding patchsets can be fixed up with the command git rebase -i --exec 'find -name "*.[ch]" | xargs s/target_phys_addr_t/hwaddr/g' origin Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 22 8月, 2012 4 次提交
-
-
由 Andreas Färber 提交于
Adopt the QOM parent field name and enforce QOM-style access via casts. Don't just typedef PCIHostState, either use it directly or embed it. Signed-off-by: NAndreas Färber <afaerber@suse.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
Use PCIHostState and PCI_HOST_BRIDGE() where appropriate. Signed-off-by: NAndreas Färber <afaerber@suse.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
Introduce type constants and cast macros. Avoid accessing parent fields directly. Signed-off-by: NAndreas Färber <afaerber@suse.de> Acked-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
During the QOM migration they were amended with further info but this is no longer the case. All static TypeInfos can be const these days. Signed-off-by: NAndreas Färber <afaerber@suse.de> Acked-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 15 2月, 2012 1 次提交
-
-
由 Andreas Färber 提交于
Replace device_init() with generalized type_init(). While at it, unify naming convention: type_init([$prefix_]register_types) Also, type_init() is a function, so add preceding blank line where necessary and don't put a semicolon after the closing brace. Signed-off-by: NAndreas Färber <afaerber@suse.de> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: malc <av1474@comtv.ru> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 04 2月, 2012 1 次提交
-
-
由 Anthony Liguori 提交于
This was done in a mostly automated fashion. I did it in three steps and then rebased it into a single step which avoids repeatedly touching every file in the tree. The first step was a sed-based addition of the parent type to the subclass registration functions. The second step was another sed-based removal of subclass registration functions while also adding virtual functions from the base class into a class_init function as appropriate. Finally, a python script was used to convert the DeviceInfo structures and qdev_register_subclass functions to TypeInfo structures, class_init functions, and type_register_static calls. We are almost fully converted to QOM after this commit. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 28 1月, 2012 6 次提交
-
-
由 Andreas Färber 提交于
Commit 999e12bb (sysbus: apic: ioapic: convert to QEMU Object Model) introduced two typos, one of which broke the mac99 machine. Signed-off-by: NAndreas Färber <afaerber@suse.de> Cc: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
This converts three devices because apic and ioapic are subclasses of sysbus. Converting subclasses independently of their base class is prohibitively hard. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
Signed-off-by: NAndreas Färber <afaerber@suse.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Andreas Färber 提交于
PCIHostState already has a busdev. Signed-off-by: NAndreas Färber <afaerber@suse.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Andreas Färber 提交于
Add -pcihost to SysBus devices to resolve name conflicts, and clarify PCI vs. Internal PCI. Signed-off-by: NAndreas Färber <afaerber@suse.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 28 11月, 2011 1 次提交
-
-
由 Avi Kivity 提交于
Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 28 9月, 2011 1 次提交
-
-
由 Blue Swirl 提交于
Avoid vga.chain4 mapping by constructing a PCI hole for upper 2G of the PCI space. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 04 9月, 2011 1 次提交
-
-
由 Avi Kivity 提交于
Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 26 8月, 2011 1 次提交
-
-
由 Anthony Liguori 提交于
This reverts commit 8ef9ea85, reversing changes made to 444dc482. From Avi: Please revert the entire pull (git revert 8ef9ea85) while I work this out - it isn't trivial. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 25 8月, 2011 1 次提交
-
-
由 Avi Kivity 提交于
Reviewed-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 08 8月, 2011 1 次提交
-
-
由 Avi Kivity 提交于
This lets us register BARs in the I/O address space. Reviewed-by: NRichard Henderson <rth@twiddle.net> Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 29 7月, 2011 1 次提交
-
-
由 Avi Kivity 提交于
This is now done sloppily, via get_system_memory(). Eventually callers will be converted to stop using that. Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 12 6月, 2011 1 次提交
-
-
由 Isaku Yamahata 提交于
use PCIDeviceInfo to initialize ids. Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
- 07 3月, 2011 1 次提交
-
-
由 Juan Quintela 提交于
It was migrating the wrong structures, no way it would work Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
- 11 12月, 2010 3 次提交
-
-
由 Alexander Graf 提交于
There's no need to bswap once we correctly set the mmio to be little endian. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Alexander Graf 提交于
The only reason we have bswap versions of the pci host code is that most pci host devices are little endian. The ppc e500 is the only odd one here, being big endian. So let's directly pass the endianness down to the mmio layer and not worry about it on the pci host layer. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Alexander Graf 提交于
As an alternative to the 3 individual handlers, there is also a simplified io mem hook function. To be consistent, let's add an endianness parameter there too. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 12 7月, 2010 2 次提交
-
-
由 Isaku Yamahata 提交于
Don't overwrite pci header type. Otherwise, multi function bit which pci_init_header_type() sets appropriately is lost. Anyway PCI_HEADER_TYPE_NORMAL is zero, so it is unnecessary to zero which is already zero cleared. how to test: run qemu and issue info pci to see whether a device in question is normal device, not pci-to-pci bridge. This is handy because guest os isn't required. tested changes: The following files are covered by using following commands. sparc64-softmmu apb_pci.c, vga-pci.c, cmd646.c, ne2k_pci.c, sun4u.c ppc-softmmu grackle_pci.c, cmd646.c, ne2k_pci.c, vga-pci.c, macio.c ppc-softmmu -M mac99 unin_pci.c(uni-north, uni-north-agp) ppc64-softmmu pci-ohci, ne2k_pci, vga-pci, unin_pci.c(u3-agp) x86_64-softmmu acpi_piix4.c, ide/piix.c, piix_pci.c -vga vmware vmware_vga.c -watchdog i6300esb wdt_i6300esb.c -usb usb-uhci.c -sound ac97 ac97.c -nic model=rtl8139 rtl8139.c -nic model=pcnet pcnet.c -balloon virtio virtio-pci.c: untested changes: The following changes aren't tested. prep_pci.c: ppc-softmmu -M prep should cover, but core dumped. unin_pci.c(uni-north-pci): the caller is commented out. openpic.c: the caller is commented out in ppc_prep.c Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
由 Isaku Yamahata 提交于
Use PCI_DEVFN() and PCI_FUNC_MAX where appropriate. This patch make it clear that func = 0. test: The following object files with/without this patch are stripped and compared. They remains same. arm-softmmu/versatile_pci.o libhw32/ppce500_pci.o libhw32/unin_pci.o libhw64/ppce500_pci.o libhw64/unin_pci.o mips-softmmu/gt64xxx.o mips64-softmmu/gt64xxx.o mips64el-softmmu/gt64xxx.o mipsel-softmmu/gt64xxx.o Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Yu Liu <yu.liu@freescale.com> Cc: Paul Brook <paul@codesourcery.com> Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 06 7月, 2010 1 次提交
-
-
由 Alex Williamson 提交于
When available, we'd like to be able to access the DeviceState when registering a savevm. For buses with a get_dev_path() function, this will allow us to create more unique savevm id strings. Signed-off-by: NAlex Williamson <alex.williamson@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 31 3月, 2010 1 次提交
-
-
由 Blue Swirl 提交于
Make byte swapping unconditional since PPC is big endian. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 22 3月, 2010 1 次提交
-
-
由 Blue Swirl 提交于
Convert pci_host_conf_register_mmio_noswap(x) to pci_host_conf_register_mmio(x, 0). Convert pci_host_conf_register_mmio(x) to pci_host_conf_register_mmio(x, 1) for big endian hosts, all cases happen to be BE. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 14 2月, 2010 3 次提交
-
-
由 Alexander Graf 提交于
The interrupt code as is didn't really work for me. I couldn't even convince Linux to take interrupt 9 in an interrupt-map. So let's do this right. Let's map all PCI interrupts to 0x1b - 0x1e. That way we're at least a small step closer to what real hardware does. I also took the interrupt pin to line conversion from OpenBIOS, which at least assures us we're compatible with our firmware :-). A dump of the PCI interrupt-map from a U2 (iBook): 00009000 00000000 00000000 00000000 ff97c528 00000034 00000001 0000d800 00000000 00000000 00000000 ff97c528 0000003f 00000001 0000c000 00000000 00000000 00000000 ff97c528 0000001b 00000001 0000c800 00000000 00000000 00000000 ff97c528 0000001c 00000001 0000d000 00000000 00000000 00000000 ff97c528 0000001d 00000001 Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Alexander Graf 提交于
The "Mac99" type so far defines a "U2" based configuration. Unfortunately, there have never been any U2 based PPC64 machines. That's what the U3 was developed for. So let's split the Mac99 machine in a PPC64 and a PPC32 machine. The PPC32 machine stays "Mac99", while the PPC64 one becomes "Mac99_U3". All peripherals stay the same. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Alexander Graf 提交于
The Uninorth PCI bridge requires different layouts in its PCI config space accessors. This patch introduces a conversion function that makes it compatible with the way Linux accesses it. I also kept an OpenBIOS compatibility hack in. I think it'd be better to take small steps here and do the config space access rework in OpenBIOS later on. When that's done we can remove that hack. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
- 06 2月, 2010 1 次提交
-
-
由 Blue Swirl 提交于
It's currently not used by PPC machines. Refactor so that also Sparc64 machines can use it. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 27 1月, 2010 1 次提交
-
-
由 Blue Swirl 提交于
PCI bridges' qdev info structures must indicate bridge header type, otherwise critical bridge registers (esp. PCI_PRIMARY_BUS, PCI_SECONDARY_BUS, PCI_SUBORDINATE_BUS) will not be writable. Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 19 12月, 2009 1 次提交
-
-
由 Markus Armbruster 提交于
Switch to the names suggested by Blue Swirl. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 12 12月, 2009 1 次提交
-
-
由 Markus Armbruster 提交于
Device names with whitespace require quoting in the shell and in the monitor. Some of the offenders are also overly long. Some have a more convenient alias, some don't. The place for verbose device names is DeviceInfo member desc. The name should be short & sweet. Signed-off-by: NMarkus Armbruster <armbru@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 01 12月, 2009 1 次提交
-
-
由 Isaku Yamahata 提交于
pci_host_data_register_io_memory and its variants are too long a bit. So shorten them. Now they are pci_host_{conf, data}_register_{mmio, mmio_noswap, ioport}() Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-