This has no real hardware analog and asserting correctness of DMA
addresses is not a perhiperal level problem. Delete.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: fc02417eb1874cb05e4f20531c6203c5a00110f1.1386136219.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

We were updating the ownership bit of all descriptors if packets
get split and written through several descriptors.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: d61b7847b51487118783c93765a485bc5c66d272.1386136219.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Cadence GEM has a MAC level loopback mode. Implement. Use the same basic
operation as the already implemented PHY loopback.
Reported-by: NDeepika Dhamija <deepika@xilinx.com>
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 3a0baf1b6b2fc1be638bdf1a37408ec38988e970.1386136219.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Support -cpu host in virt machine (treating it like an A15, ie
with a GIC v2 and the A15's private peripherals.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Message-id: 1385140638-10444-12-git-send-email-peter.maydell@linaro.org

Implement '-cpu host' for ARM when we're using KVM, broadly
in line with other KVM-supporting architectures.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Message-id: 1385140638-10444-11-git-send-email-peter.maydell@linaro.org

Instead of assuming that a KVM target CPU must always be a
Cortex-A15 and hardcoding this in kvm_arch_init_vcpu(),
store the KVM_ARM_TARGET_* value in the ARMCPU class,
and use that.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Message-id: 1385140638-10444-10-git-send-email-peter.maydell@linaro.org

Add 'virt' platform support corresponding to arch/arm/mach-virt
in the Linux kernel tree. This has no platform-specific code but
can use any device whose kernel driver is is able to work purely
from a device tree node. We use this to instantiate a minimal
set of devices: a GIC and some virtio-mmio transports.
Signed-off-by: NJohn Rigby <john.rigby@linaro.org>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Message-id: 1385140638-10444-8-git-send-email-peter.maydell@linaro.org
[PMM:
 Significantly overhauled:
 * renamed user-facing machine to just "virt"
 * removed the A9 support (it can't work since the A9 has no
   generic timers)
 * added virtio-mmio transports instead of random set of 'soc' devices
   (though we retain a pl011 UART)
 * instead of updating io_base as we step through adding devices,
   define a memory map with an array (similar to vexpress)
 * similarly, define irqmap with an array
 * folded in some minor fixes from John's aarch64-support patch
 * rather than explicitly doing endian-swapping on FDT cells,
   use fdt APIs that let us just pass in host-endian values
   and let the fdt layer take care of the swapping
 * miscellaneous minor code cleanups and style fixes
]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

New ARM boards are generally expected to boot their secondary CPUs
via the PSCI interface, rather than ad-hoc "loop around in holding
pen code" as hw/arm/boot.c implements. In particular this is
necessary for mach-virt kernels. For KVM we achieve this by creating
the VCPUs with a feature flag marking them as starting in PSCI
powered-down state; the guest kernel will then make a PSCI call
(implemented in the host kernel) to start the secondaries at
an address of its choosing once it has got the primary CPU up.

Implement this setting of the feature flag, controlled by a
qdev property for ARMCPU, which board code can set if it is a
PSCI system.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Message-id: 1385140638-10444-7-git-send-email-peter.maydell@linaro.org

Linux requires device tree CPU nodes to include a 'compatible'
string describing the CPU. Add a field in the ARMCPU struct for
this so that boards which construct a device tree can insert
the correct CPU nodes.

Note that there is currently no officially specified 'compatible'
string for the TI925T, Cortex-M3 or SA1110 CPUs.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Message-id: 1385140638-10444-6-git-send-email-peter.maydell@linaro.org

Provide versions of the KVM PSCI constants to non-KVM code;
this will allow us to avoid an ifdef in boards which set up
a PSCI node in the device tree.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Message-id: 1385140638-10444-5-git-send-email-peter.maydell@linaro.org

If no fdt is provided on command line and the new field
get_dtb in struct arm_boot_info is set then call it to
get a device tree blob.
Signed-off-by: NJohn Rigby <john.rigby@linaro.org>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Message-id: 1385140638-10444-4-git-send-email-peter.maydell@linaro.org
[PMM: minor tweaks and cleanup]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Device trees created with create_device_tree() may not have any
entries in their reservemap, because the FDT API requires that the
reservemap is completed before any FDT nodes are added, and
create_device_tree() itself creates a node.  However we were not
calling fdt_finish_reservemap(), which meant that there was no
terminator in the reservemap list and whatever happened to be at the
start of the FDT data section would end up being interpreted as
reservemap entries.  Avoid this by calling fdt_finish_reservemap()
to add the terminator.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1385140638-10444-3-git-send-email-peter.maydell@linaro.org

There are a number of places where it would be convenient for ARM
code to have working definitions of KVM constants even in code
which is compiled with CONFIG_KVM not set. In this situation we
can't simply include the kernel KVM headers (which might conflict
with host header definitions or not even compile on the compiler
we're using) so we have to redefine equivalent constants.
Provide a mechanism for doing this and checking that the values
match, and use it for the constants we're currently exposing
via an ad-hoc mechanism.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NChristoffer Dall <christoffer.dall@linaro.org>
Message-id: 1385140638-10444-2-git-send-email-peter.maydell@linaro.org

Add the global timer to A9 MPCore.
Signed-off-by: NFrançois LEGAL <devel@thom.fr.eu.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: ff92f35f438ac671b57d99d823723dd3e62d2c49.1385969450.git.peter.crosthwaite@xilinx.com
[PC Changes:
 * new commit message
 * split off original version as a separate patch
 * Rebased against new mpcore implementation (with struct embedding)
]
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The ARM A9 MPCore has a timer that is global to all cores in the cluster.
The timer is shared but each core has a private independent comparator
and interrupt.

Based on version contributed by Francois LEGAL.
Signed-off-by: NFrançois LEGAL <devel@thom.fr.eu.org>
Message-id: 4918e89476b8da916be2964ec41578b50d569a37.1385969450.git.peter.crosthwaite@xilinx.com
[PC changes:
 * New commit message
 * Re-implemented as single timer model
 * Fixed backwards counting issue in polled mode
 * completed VMSD fields
 * macroified magic numbers (and headerified reg definitions)
 * split of as device-model-only patch
 * use bitops for 64 bit register access
 * Fixed auto increment mode to check condition properly
 * general cleanup (names/style etc).
]
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
[PMM:
 * minor typo fixes
 * added missing return after error_setg()
 * dropped setting dc->no_user = 1
]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

To make it consistent for easier code reading. The order in which
variables are defined and functions are called is set to match the
address map ordering.

The new consistent order of doing stuff is:

SCU -> GIC -> MPTimer -> WDT.

0 functional change.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 8f31398e6d9a93f57291399f269039da1a77a2b5.1385969450.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Rename this variable for consistency with the above defined mptimerdev
variable.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 28939ef95589a62414634e86c47cef76b21b15f7.1385969450.git.peter.crosthwaite@xilinx.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Linux kernel from version 3.4 requires CM_REFCNT register for sched timer
for Integrator/CP board (integrator_defconfig).

See http://infocenter.arm.com/help/topic/com.arm.doc.dui0138e/ch04s06s11.htmlSigned-off-by: NJan Petrous <jan.petrous@tieto.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This improves readability and simplifies the code.

Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

FR bit should be initialized to 1 for MIPS64, under condition that this
bit is writable and that CPU has an FPU unit. It should be initialized to
zero for MIPS32.
This fixes different MIPS32 issues with FPU instructions whose behaviour
defaulted to 64-bit FPU mode.
Signed-off-by: NPetar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Everything before CPU_COMMON in the structure is cleared as part of a
CPU reset. This included the features flag, which indicates whether SH4A
instructions are supported or not. As a result, a CPU reset downgraded
the CPU from an SH4A to an SH4.
Signed-off-by: NBobby Bingham <koorogi@koorogi.info>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Using the new opcodes we can reduce if/else trees to
a single statement.
Reviewed-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

vfio-pci updates include:
 - Update linux-headers to include KVM-VFIO device support
 - Enable QEMU support for KVM-VFIO device
 - Additional Nvidia x-vga quirk to ACK MSI interrupts
 - Debug options to disable MSI/X KVM acceleration
 - Fix to cleanup MSI-X vectors on shutdown and avoid IRQ route leaks

The KVM-VFIO device support enables KVM to manage how it handles
coherency instructions in the presence of non-coherent I/O.  Dave
Airlie had noted that the Nvidia MSI ACK support here may just be
scratching the surface, but it's better than what we have now and
it's only enabled via the x-vga option, so I'm willing to add since
it does enable some users.

# gpg: Signature made Fri 06 Dec 2013 12:28:19 PM PST using RSA key ID 3BB08B22
# gpg: Can't check signature: public key not found

# By Alex Williamson
# Via Alex Williamson
* awilliam/tags/vfio-pci-for-qemu-20131206.0:
  vfio-pci: Release all MSI-X vectors when disabled
  vfio-pci: Add debug config options to disable MSI/X KVM support
  vfio-pci: Fix Nvidia MSI ACK through 0x88000 quirk
  vfio-pci: Make use of new KVM-VFIO device
  linux-headers: Update from v3.13-rc3

Message-id: 20131206204715.16731.12627.stgit@bling.home
Signed-off-by: NAnthony Liguori <aliguori@amazon.com>

# By Paolo Bonzini (17) and others
# Via Stefan Hajnoczi
* stefanha/block: (48 commits)
  qemu-iotests: filter QEMU monitor \r\n
  aio: make aio_poll(ctx, true) block with no fds
  block: clean up bdrv_drain_all() throttling comments
  qcow2: use start_of_cluster() and offset_into_cluster() everywhere
  qemu-img: decrease progress update interval on convert
  qemu-img: round down request length to an aligned sector
  qemu-img: dynamically adjust iobuffer size during convert
  block/iscsi: set bs->bl.opt_transfer_length
  block: add opt_transfer_length to BlockLimits
  block/iscsi: set bdi->cluster_size
  qemu-img: fix usage instruction for qemu-img convert
  qemu-img: add support for skipping zeroes in input during convert
  qemu-nbd: add doc for option -f
  qemu-iotests: add test for snapshot in qemu-img convert
  qemu-img: add -l for snapshot in convert
  qemu-iotests: add 058 internal snapshot export with qemu-nbd case
  qemu-nbd: support internal snapshot export
  snapshot: distinguish id and name in load_tmp
  qemu-iotests: Split qcow2 only cases in 048
  qemu-iotests: Clean up spaces in usage output
  ...

Message-id: 1386347807-27359-1-git-send-email-stefanha@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@amazon.com>

# By Alex Williamson (1) and others
# Via Paolo Bonzini
* qemu-kvm/uq/master:
  target-i386: fix cpuid leaf 0x0d
  qemu: mempath: prefault pages manually (v4)
  kvm: Query KVM for available memory slots

Message-id: 1386345276-9803-1-git-send-email-pbonzini@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@amazon.com>

Update seabios to master snapshot (pre-1.7.4).
Update vgabios, switch from lgplvgabios to seavgabios.
Update build process to build both 128k and 256k bios versions.
Use 256k bios for pc-*-2.0+ machine types.

# gpg: Signature made Fri 06 Dec 2013 12:01:24 AM PST using RSA key ID D3E87138
# gpg: Can't check signature: public key not found

# By Gerd Hoffmann
# Via Gerd Hoffmann
* kraxel/tags/pull-seabios-31b8b4e-1:
  pc: switch 2.0 machine types to large seabios binary
  roms: update vgabios binaries
  roms: update seabios binaries
  roms: enable seabios cross builds
  roms: build two seabios binaries
  roms: update seabios submodule to 31b8b4eea9d9ad58a73b22a6060d3ac1c419c26d
  add firmware to machine options
  add pc-{i440fx,q35}-2.0 machine types

Message-id: 1386322527-23148-1-git-send-email-kraxel@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@amazon.com>

# By Paul Moore
# Via Eduardo Otubo
* otubo/seccomp:
  seccomp: add kill() to the syscall whitelist

Message-id: 1386075077-3240-1-git-send-email-otubo@linux.vnet.ibm.com
Signed-off-by: NAnthony Liguori <aliguori@amazon.com>

Block patches for 2.0 (flushing block-next)

# gpg: Signature made Fri 29 Nov 2013 08:43:18 AM PST using RSA key ID C88F2FD6
# gpg: Can't check signature: public key not found

# By Peter Lieven (17) and others
# Via Kevin Wolf
* kwolf/tags/for-anthony: (41 commits)
  qemu-iotests: Add sample image and test for VMDK version 3
  vmdk: Allow read only open of VMDK version 3
  qemu-iotests: Filter out 'qemu-io> ' prompt
  qemu-iotests: Filter qemu-io output in 025
  block: Use BDRV_O_NO_BACKING where appropriate
  qemu-iotests: Test snapshot mode
  block: Enable BDRV_O_SNAPSHOT with driver-specific options
  qemu-iotests: Make test case 030, 040 and 055 deterministic
  qemu-iotest: Add pause_drive and resume_drive methods
  blkdebug: add "remove_break" command
  qemu-iotests: Drop local version of cancel_and_wait from 040
  sheepdog: support user-defined redundancy option
  sheepdog: refactor do_sd_create()
  qdict: Optimise qdict_do_flatten()
  qdict: Fix memory leak in qdict_do_flatten()
  MAINTAINERS: add sheepdog development mailing list
  COW: Extend checking allocated bits to beyond one sector
  COW: Speed up writes
  qapi: Change BlockDirtyInfo to list
  block: per caller dirty bitmap
  ...

Message-id: 1385743555-27888-1-git-send-email-kwolf@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@amazon.com>

# By Paul Durrant (1) and Wei Liu (1)
# Via Stefano Stabellini
* sstabellini/xen-2013-12-01:
  xen-pvdevice: make device-id property compulsory
  xen: fix two errors when debug is enabled

Message-id: alpine.DEB.2.02.1312011829000.3198@kaball.uk.xensource.com
Signed-off-by: NAnthony Liguori <aliguori@amazon.com>

# By Richard Henderson
# Via Richard Henderson
* rth/auxv-2:
  linux-user: Use qemu_getauxval for AT_EXECFD
  util: Use qemu_getauxval in linux qemu_cache_utils_init
  tcg-s390: Use qemu_getauxval in query_facilities
  tcg-arm: Use qemu_getauxval
  tcg-ppc64: Use qemu_getauxval
  osdep: Create qemu_getauxval and qemu_init_auxval

Message-id: 1385757754-10702-1-git-send-email-rth@twiddle.net
Signed-off-by: NAnthony Liguori <aliguori@amazon.com>

# By Erik de Castro Lopo (2) and others
# Via Riku Voipio
* riku/linux-user-for-upstream:
  linux-user: pass correct parameter to do_shmctl()
  linux-user: create target_structs header to place ipc_perm and shmid_ds
  flatload: fix non-GOT relocations
  linux-user: Implement handling of 5 POSIX timer syscalls.
  linux-user: Add target struct defs needed for POSIX timer syscalls.

Message-id: cover.1385732338.git.riku.voipio@linaro.org
Signed-off-by: NAnthony Liguori <aliguori@amazon.com>

Improvements for usb3 bulk stream (usb core, xhci).
Bugfixes for uas emulation.
Add remote wakeup support for ehci.
Add suspend support for xhci.
Misc minor tweaks and fixes.

# gpg: Signature made Thu 28 Nov 2013 11:44:49 PM PST using RSA key ID D3E87138
# gpg: Can't check signature: public key not found

# By Hans de Goede (11) and others
# Via Gerd Hoffmann
* kraxel/tags/pull-usb-1:
  usb: move usb_{hi,lo} helpers to header file.
  usb: add vendor request defines
  trace-events: Clean up after removal of old usb-host code
  Revert "usb-tablet: Don't claim wakeup capability for USB-2 version"
  ehci: implement port wakeup
  xhci: Call usb_device_alloc/free_streams
  usb: Add usb_device_alloc/free_streams
  usb: Add max_streams attribute to endpoint info
  uas: s/ui/iu/
  uas: Fix response iu struct definition
  uas: Bounds check tags when using streams
  uas: Streams are numbered 1-y, rather then 0-x
  uas: Fix / cleanup usb_uas_task error handling
  uas: Only use report iu-s for task_mgmt status reporting
  scsi: Add 2 new sense codes needed by uas
  xhci: add support for suspend/resume
  xhci: Add a few missing checks for disconnected devices

Message-id: 1385712381-30918-1-git-send-email-kraxel@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@amazon.com>

# By Stefan Weil (9) and others
# Via Michael Tokarev
* mjt/trivial-patches:
  eeprom93xx: fix coding style
  hw/ppc/mac.h: remove unused BIOS_FILENAME definition
  Don't crash on keyboard input with no handler
  libcacard/vcard_emul_nss: Remove unused statement (value stored is never read)
  libcacard/cac: Remove unused statement (value stored is never read)
  virtio-net: fix the indent
  misc: Replace 'struct QEMUTimer' by 'QEMUTimer'
  qobject: Fix compiler warning (missing gnu_printf format attribute)
  acpi-build: Fix compiler warning (missing gnu_printf format attribute)
  .gitignore: Ignore config.status
  gtk: Replace conditional debug messages by trace methods
  console: Replace conditional debug messages by trace methods
  trace: Remove trace.h from hw/usb/hcd-ehci.h (less dependencies)
  trace: Remove trace.h from console.h (less dependencies)

Message-id: 1385408466-13183-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: NAnthony Liguori <aliguori@amazon.com>

scripts/checkpatch.pl reports about some style problems,
this commit fixes some of them:

ERROR: space prohibited before open square bracket '['
+    .fields      = (VMStateField []) {

ERROR: space prohibited after that '!' (ctx:BxW)
+    if (! eeprom->eecs && eecs) {
         ^

ERROR: space prohibited after that '!' (ctx:WxW)
+    } else if (eeprom->eecs && ! eecs) {
                                ^

ERROR: space prohibited after that '!' (ctx:WxW)
+    } else if (eecs && ! eeprom->eesk && eesk) {
                        ^

ERROR: switch and case should be at the same indent
                     switch (address >> (eeprom->addrbits - 2)) {
+                        case 0:
[...]
+                        case 1:
[...]
+                        case 2:
[...]
+                        case 3:

ERROR: return is not a function, parentheses are not required
+    return (eeprom->eedo);

ERROR: switch and case should be at the same indent
     switch (nwords) {
+        case 16:
+        case 64:
[...]
+        case 128:
+        case 256:
[...]
+        default:
Signed-off-by: NAntony Pavlov <antonynpavlov@gmail.com>
Cc: Stefan Weil <sw@weilnetz.de>
Reviewed-by: NStefan Weil <sw@weilnetz.de>
Cc: qemu-trivial@nongnu.org
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

We were relying on msix_unset_vector_notifiers() to release all the
vectors when we disable MSI-X, but this only happens when MSI-X is
still enabled on the device.  Perform further cleanup by releasing
any remaining vectors listed as in-use after this call.  This caused
a leak of IRQ routes on hotplug depending on how the guest OS prepared
the device for removal.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Cc: qemu-stable@nongnu.org

It's sometimes useful to be able to verify interrupts are passing
through correctly.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

When MSI is enabled on Nvidia GeForce cards the driver seems to
acknowledge the interrupt by writing a 0xff byte to the MSI capability
ID register using the PCI config space mirror at offset 0x88000 from
BAR0.  Without this, the device will only fire a single interrupt.
VFIO handles the PCI capability ID/next registers as virtual w/o write
support, so any write through config space is currently dropped.  Add
a check for this and allow the write through the BAR window.  The
registers are read-only anyway.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

Add and remove groups from the KVM virtual VFIO device as we make
use of them.  This allows KVM to optimize for performance and
correctness based on properties of the group.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

Update to tag v3.13-rc3 (374b105797c3d4f29c685f3be535c35f5689b30e)
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

SMTP does not preserve newlines.  This is normally not a problem if the
email body uses DOS or UNIX newlines consistently.  In 051.out we mix
UNIX newlines with DOS newlines (since QEMU monitor output uses \r\n).

This patch filters the QEMU monitor output so the golden master file
uses UNIX newlines exclusively.

The result is that patches touching 051.out will apply cleanly without
mangling newlines after this commit.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>