h_enter() in the spapr code needs to know the page size of the HPTE it's
about to insert.  Unlike other paths that do this, it doesn't have access
to the SLB, so at the moment it determines this with some open-coded
tests which assume POWER7 or POWER8 page size encodings.

To make this more flexible add ppc_hash64_hpte_page_shift_noslb() to
determine both the "base" page size per segment, and the individual
effective page size from an HPTE alone.

This means that the spapr code should now be able to handle any page size
listed in the env->sps table.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: NAlexander Graf <agraf@suse.de>

When HPTEs are removed or modified by hypercalls on spapr, we need to
invalidate the relevant pages in the qemu TLB.

Currently we do that by doing some complicated calculations to work out the
right encoding for the tlbie instruction, then passing that to
ppc_tlb_invalidate_one()... which totally ignores the argument and flushes
the whole tlb.

Avoid that by adding a new flush-by-hpte helper in mmu-hash64.c.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: NAlexander Graf <agraf@suse.de>

Currently both the tlbiva instruction (used on 44x chips) and the tlbie
instruction (used on hash MMU chips) are both handled via
ppc_tlb_invalidate_one().  This is silly, because they're invoked from
different places, and do different things.

Clean this up by separating out the tlbiva instruction into its own
handling.  In fact the implementation is only a stub anyway.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NLaurent Vivier <lvivier@redhat.com>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: NAlexander Graf <agraf@suse.de>

ppc_tlb_invalidate_one() has a big switch handling many different MMU
types.  However, most of those branches can never be reached:

It is called from 3 places: from remove_hpte() and h_protect() in
spapr_hcall.c (which always has a 64-bit hash MMU type), and from
helper_tlbie() in mmu_helper.c.

Calls to helper_tlbie() are generated from gen_tlbiel, gen_tlbiel and
gen_tlbiva.  The first two are only used with the PPC_MEM_TLBIE flag,
set only with 32-bit or 64-bit hash MMU models, and gen_tlbiva() is
used only on 440 and 460 models with the BookE mmu model.

These means the exhaustive list of MMU types which may call
ppc_tlb_invalidate_one() is: POWERPC_MMU_SOFT_6xx, POWERPC_MMU_601,
POWERPC_MMU_32B, POWERPC_MMU_SOFT_74xx, POWERPC_MMU_64B, POWERPC_MMU_2_03,
POWERPC_MMU_2_06, POWERPC_MMU_2_07 and POWERPC_MMU_BOOKE.

Clean up by removing logic for all other MMU types from
ppc_tlb_invalidate_one().

This means that ppc4xx_tlb_invalidate_virt() now has no callers, or rather,
makes it obvious that it has no callers.  So, we remove that function as
well.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

At present the 64-bit hash MMU code uses information from the SLB to
determine the page size of a translation.  We do need that information to
correctly look up the hash table.  However the MMU also allows a
possibly larger page size to be encoded into the HPTE itself, which is used
to populate the TLB.  At present qemu doesn't check that, and so doesn't
support the MPSS "Multiple Page Size per Segment" feature.

This makes a start on allowing this, by adding an hpte_page_shift()
function which looks up the page size of an HPTE.  We use this to validate
page sizes encodings on faults, and populate the qemu TLB with larger
page sizes when appropriate.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: NAlexander Graf <agraf@suse.de>

Currently, the ppc_hash64_page_shift() function looks up a page size based
on information in an SLB entry.  It open codes the bit translation for
existing CPUs, however different CPU models can have different SLB
encodings.  We already store those in the 'sps' table in CPUPPCState, but
we don't currently enforce that that actually matches the logic in
ppc_hash64_page_shift.

This patch reworks lookup of page size from SLB in several ways:
  * ppc_store_slb() will now fail (triggering an illegal instruction
    exception) if given a bad SLB page size encoding
  * On success ppc_store_slb() stores a pointer to the relevant entry in
    the page size table in the SLB entry.  This is looked up directly from
    the published table of page size encodings, so can't get out ot sync.
  * ppc_hash64_htab_lookup() and others now use this precached page size
    information rather than decoding the SLB values
  * Now that callers have easy access to the page_shift,
    ppc_hash64_pte_raddr() amounts to just a deposit64(), so remove it and
    have the callers use deposit64() directly.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: NAlexander Graf <agraf@suse.de>

ppc_store_slb updates the SLB for PPC cpus with 64-bit hash MMUs.
Currently it takes two parameters, which contain values encoded as the
register arguments to the slbmte instruction, one register contains the
ESID portion of the SLBE and also the slot number, the other contains the
VSID portion of the SLBE.

We're shortly going to want to do some SLB updates from other code where
it is more convenient to supply the slot number and ESID separately, so
rework this function and its callers to work this way.

As a bonus, this slightly simplifies the emulation of segment registers for
when running a 32-bit OS on a 64-bit CPU.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NLaurent Vivier <lvivier@redhat.com>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: NAlexander Graf <agraf@suse.de>

Like a lot of places these files include a mixture of functions taking
both the older CPUPPCState *env and newer PowerPCCPU *cpu.  Move a step
closer to cleaning this up by standardizing on PowerPCCPU, except for the
helper_* functions which are called with the CPUPPCState * from tcg.

Callers and some related functions are updated as well, the boundaries of
what's changed here are a bit arbitrary.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NLaurent Vivier <lvivier@redhat.com>
Reviewed-by: NAlexander Graf <agraf@suse.de>

This stub function is in the !KVM ifdef in target-ppc/kvm_ppc.h.  However
no such function exists on the KVM side, or is ever used.

I think this originally referenced a function which read host page size
information from /proc, for we we now use the KVM GET_SMMU_INFO extension
instead.

In any case, it has no function now, so remove it.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NLaurent Vivier <lvivier@redhat.com>
Reviewed-by: NAlexander Graf <agraf@suse.de>

Darwin/OS X use the undocumented kMacRISCPCIAddressSelect (0x48) to
configure PCI memory space size for mac99 machines. Without this
register, warnings similar to below are emitted to the console during boot:

AppleMacRiscPCI: bad range 2(80000000:01000000)
AppleMacRiscPCI: bad range 2(81000000:00001000)
AppleMacRiscPCI: bad range 2(81080000:00080000)

Based upon the algorithm in Darwin's AppleMacRiscPCI.cpp driver, set the
kMacRISCPCIAddressSelect register so that Darwin considers the PCI
memory space to be at 0x80000000 (size 0x10000000) which matches that
currently used by QEMU and OpenBIOS.
Signed-off-by: NJohn Arbuckle <programmingkidx@gmail.com>
Tested-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
[commit message and comment revised as suggested by Mark Cave-Ayland]
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

This avoids MacsBug hanging at startup in the absence of ADB mouse
input, by replying with an error (which is also what MOL does) when
it sends an unknown command (0x1c).
Signed-off-by: NAlyssa Milburn <fuzzie@fuzzie.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

The implementation of the H_ENTER hypercall for PAPR guests needs to
enforce correct access attributes on the inserted HPTE.  This means
determining if the HPTE's real address is a regular RAM address (which
requires attributes for coherent access) or an IO address (which requires
attributes for cache-inhibited access).

At the moment this check is implemented with (raddr < machine->ram_size),
but that only handles addresses in the base RAM area, not any hotplugged
RAM.

This patch corrects the problem with a new helper.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NAlexey Kardashevskiy <aik@ozlabs.ru>

Add the XML and functions to get and set VSX registers.
Signed-off-by: NAnton Blanchard <anton@samba.org>
(fixed little-endian guests)
Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Let's reuse the ppc_maybe_bswap_register() helper, like we already do
with the general registers.
Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Altivec registers are 128-bit wide. They are stored in memory as two
64-bit values that must be byteswapped when the guest is little-endian.
Let's reuse the ppc_maybe_bswap_register() helper for this.

We also need to fix the ordering of the 64-bit elements according to
the target endianness, for both system and user mode.
Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

This helper will be used to support Altivec registers in little-endian guests.
This patch does not change functionnality.

Note: I had to put the helper some lines away from the gdb_*_avr_reg()
routines to get a more readable patch.
Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Let's reuse the ppc_maybe_bswap_register() helper, like we already do
with the general registers.
Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

This helper will be used to support FP, Altivec and VSX registers when
the guest is little-endian.
Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

On VSX capable CPUs, the 32 FP registers are mapped to the high-bits
of the 32 first VSX registers. So if you have:

VSR31 = (uint128) 0x0102030405060708090a0b0c0d0e0f00

then

FPR31 = (uint64) 0x0102030405060708

The kernel stores the VSX registers in the fp_state struct following the
host endian element ordering.

On big-endian:

fp_state.fpr[31][0] = 0x0102030405060708
fp_state.fpr[31][1] = 0x090a0b0c0d0e0f00

On little-endian:

fp_state.fpr[31][0] = 0x090a0b0c0d0e0f00
fp_state.fpr[31][1] = 0x0102030405060708

The KVM_GET_ONE_REG and KVM_SET_ONE_REG ioctls preserve this ordering, but
QEMU considers it as big-endian and always copies element [0] to the
fpr[] array and element [1] to the vsr[] array. This does not work with
little-endian hosts, and you will get:

(qemu) p $f31
0x90a0b0c0d0e0f00

instead of:

(qemu) p $f31
0x102030405060708

This patch fixes the element ordering for little-endian hosts.
Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

The functions for migrating the hash page table on pseries machine type
(htab_save_setup() and htab_load()) can report some errors with an
explicit fprintf() before returning an appropriate error code.  Change some
of these to use error_report() instead. htab_save_setup() is omitted for
now to avoid conflicts with some other in-progress work.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>

This function includes a number of explicit fprintf()s for errors.
Change these to use error_report() instead.

Also replace the single exit(EXIT_FAILURE) with an explicit exit(1), since
the latter is the more usual idiom in qemu by a large margin.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>

Use the error handling infrastructure to pass an error out from
try_create_xics() instead of assuming &error_abort - the caller is in a
better position to decide on error handling policy.

Also change the error handling from an &error_abort to &error_fatal, since
this occurs during the initial machine construction and could be triggered
by bad configuration rather than a program error.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>

The errors detected in this function necessarily indicate bugs in the rest
of the qemu code, rather than an external or configuration problem.

So, a simple assert() is more appropriate than any more complex error
reporting.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>

Use error_setg() to return an error rather than an explicit exit().
Previously it was an exit(0) instead of a non-zero exit code, which was
simply a bug.  Also improve the error message.

While we're at it change the type of spapr_vga_init() to bool since that's
how we're using it anyway.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>

Use error_setg() and return an error, rather than using an explicit exit().

Also improve messages, and be more explicit about which constraint failed.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NBharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>

Currently spapr_cpu_init() is hardcoded to handle any errors as fatal.
That works for now, since it's only called from initial setup where an
error here means we really can't proceed.

However, we'll want to handle this more flexibly for cpu hotplug in future
so generalize this using the error reporting infrastructure.  While we're
at it make a small cleanup in a related part of ppc_spapr_init() to use
error_report() instead of an old-style explicit fprintf().
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NBharata B Rao <bharata@linux.vnet.ibm.com>
Reviewed-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>

Current ppc_set_compat() returns -1 for errors, and also (unconditionally)
reports an error message.  The caller in h_client_architecture_support()
may then report it again using an outdated fprintf().

Clean this up by using the modern error reporting mechanisms.  Also add
strerror(errno) to the error message.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Reviewed-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>

If guest doesn't have any dynamically reconfigurable (DR) logical memory
blocks (LMB), then we shouldn't create ibm,dynamic-reconfiguration-memory
device tree node.
Signed-off-by: NBharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

h_client_architecture_support() uses rtas_ld() for general purpose memory
access, despite the fact that it's not an RTAS routine at all and rtas_ld
makes things more awkward.

Clean this up by replacing rtas_ld() calls with appropriate ldXX_phys()
calls.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NAlexey Kardashevskiy <aik@ozlabs.ru>

rtas_st_buffer_direct() is a not particularly useful wrapper around
cpu_physical_memory_write().  All the callers are in
rtas_ibm_configure_connector, where it's better handled by local helper.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NAlexey Kardashevskiy <aik@ozlabs.ru>

rtas_st_buffer() appears in spapr.h as though it were a widely used helper,
but in fact it is only used for saving data in a format used by
rtas_ibm_get_system_parameter().  This changes it to a local helper more
specifically for that function.

While we're there fix a couple of small defects in
rtas_ibm_get_system_parameter:
  - For the string value SPLPAR_CHARACTERISTICS, it wasn't including the
    terminating \0 in the length which it should according to LoPAPR
    7.3.16.1
  - It now checks that the supplied buffer has at least enough space for
    the length of the returned data, and returns an error if it does not.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Reviewed-by: NAlexey Kardashevskiy <aik@ozlabs.ru>

Include some fields missed from the previous VMState conversion to the
migration stream, as well as the new SR_INT delay timer.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Make sure that we include the DBDMA controller state in the migration
stream.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Make sure that we include the value of dma_active in the migration stream.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: NJohn Snow <jsnow@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Currently the aiocb is held within MACIOIDEState, however the IDE core code
assumes that the current actvie DMA aiocb is held in aiocb in a few places,
e.g. ide_bus_reset() and ide_reset().

Switch over to using IDEDMA aiocb to store the aiocb for the current active
DMA request so that bus resets and restarts are handled correctly. As a
consequence we can now use ide_set_inactive() rather than handling its
functionality ourselves.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: NJohn Snow <jsnow@redhat.com>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Otherwise some internal xer variables fail to get set post-migration.
Signed-off-by: NMark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

We never released anything older than POWER8 DD2.0 and POWER8E DD2.1,
so let's use these versions, without that some firmware or Linux code
might fail to use some HW features that were non functional in earlier
internal only spins of the chip.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>

Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-38-git-send-email-peter.maydell@linaro.org

Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-37-git-send-email-peter.maydell@linaro.org

Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-36-git-send-email-peter.maydell@linaro.org