Commit 03847837 (scsi-block: remove properties that are not relevant for
passthrough, 2012-07-09) removed one property that should have been
left there, "bootindex".

It also did not touch scsi-generic, while it should have.

Fix both problems.
Reported-by: NAlexandre DERUMIER <aderumier@odiso.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

SeaBIOS will issue requests for more than 64k when loading a CD-ROM
image into memory.  Support the TCHI register from the AMD PCscsi
spec.
Acked-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add a 'hba_serial' property to the megasas driver. Originally
it would be using a pointer value which would break migration.
Reported-by: NStefan Weil <sw@weilnetz.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The microMIPS SWP and SDP instructions do not modify GPRs.  So their
behavior is well defined when RD equals BASE.  The MIPS Architecture
Verification Programs (AVPs) check that they work as expected.  This
is required for AVPs to pass.
Signed-off-by: NEric Johnson <ericj@mips.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The MIPS Architecture Verification Programs (AVPs) check privileged
instructions for the required privilege level.  These changes are needed
to pass the AVP suite.
Signed-off-by: NEric Johnson <ericj@mips.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

This reverts commit 145c7c88.
Signed-off-by: Nmalc <av1474@comtv.ru>

This reverts commit 7764ae96.
Signed-off-by: Nmalc <av1474@comtv.ru>

This reverts commit 39dda260.
Signed-off-by: Nmalc <av1474@comtv.ru>

This reverts commit 482f7bf8.
Signed-off-by: Nmalc <av1474@comtv.ru>

This reverts commit f278d494.
Signed-off-by: Nmalc <av1474@comtv.ru>

The kernel will emulate this instruction if it's not supported
natively.  This insn is used for TLS, among other things, and
so is required by modern glibc.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Cc: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

We've already eliminated both base and index being zero.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The FS input to CVT.PS.S is the high half and FT is the low half.
tcg_gen_concat_i32_i64 takes the low half first, so the operands
were in the wrong order.
Signed-off-by: NRichard Sandiford <rdsandiford@googlemail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Read the second input operand of RECIP2.S and RECIP2.PS from FT rather
than FD.  RECIP2.D is already correct.
Signed-off-by: NRichard Sandiford <rdsandiford@googlemail.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Store slow path has been broken in e141ab52:
- the arguments are shifted before the last one (mem_index) is written.
- the shift is done for both slow and fast paths.

Fix that. Also optimize a bit by bundling the move together. This still
can be optimized, but it's better to wait for a decision to be taken on
the arguments order.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Prologue and epilogue code has been broken in cea5f9a2.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The CONFIG_TCG_PASS_AREG0 code for calling ld/st helpers was
broken in that it did not respect the ABI requirement that 64
bit values were passed in even-odd register pairs. The simplest
way to fix this is to implement some new utility functions
for marshalling function arguments into the correct registers
and stack, so that the code which sets up the address and
data arguments does not need to care whether there has been
a preceding env argument.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This patch provides a way to optionally suppress spurious interrupts,
as a workaround for systems described below:

Some old operating systems do not handle spurious interrupts well,
and qemu tends to generate them significantly more often than
real hardware.

Examples:
  - Microport UNIX System V/386 v 2.1 (ca 1987)
    (The main problem I'm fixing: Without this patch, it panics
    sporadically when accessing the hard disk.)
  - AT&T UNIX System V/386 Release 4.0 Version 2.1a (ca 1991)
    See screenshot in "QEMU Official OS Support List":
    http://www.claunia.com/qemu/objectManager.php?sClass=application&iId=9
    (I don't have this system to test.)
  - A report about OS/2 boot lockup from 2004 by Hampa Hug:
    http://lists.nongnu.org/archive/html/qemu-devel/2004-09/msg00367.html
    (My patch was partially inspired by his.)
    Also: http://lists.nongnu.org/archive/html/qemu-devel/2005-06/msg00243.html
    (I don't have this system to test.)
Signed-off-by: NMatthew Ogilvie <mmogilvi_qemu@miniinfo.net>
Signed-off-by: Nmalc <av1474@comtv.ru>

This patch adds some optional compatibility hacks (default
disabled) to allow Microport UNIX to function under qemu.

I've tried to structure it to be easy to add more hacks for other
old CGA programs, if anyone ever needs them.

Microport UNIX System V/386 v 2.1 (ca 1987) tries to program
the CGA registers directly with neither the assistance of BIOS, nor
with proper handling of EGA/VGA-only registers.  Note that it didn't
work on real VGA hardware, either (although in that case, the most
obvious problems seemed to be out-of-range hsync and/or vsync
signalling, rather than the issues in this patch).

Eventually real MDA and/or CGA support might provide an alternative to
this patch, although a hybrid approach like this patch might still
be useful in marginal cases.
Signed-off-by: NMatthew Ogilvie <mmogilvi_qemu@miniinfo.net>
Signed-off-by: Nmalc <av1474@comtv.ru>

The feature was added in commit cb5a7aa8 Sep 2008.
My description is based on "Better VGA retrace emulation (needed
for some DOS games/demos)" from
http://www.boblycat.org/~malc/code/patches/qemu/index.htmlSigned-off-by: NMatthew Ogilvie <mmogilvi_qemu@miniinfo.net>
Signed-off-by: Nmalc <av1474@comtv.ru>

Without this patch, the -hdachs argument had to occur either
BEFORE the corresponding "-hda" option, or AFTER the plain
disk image name (if neither -hda nor -drive is used).  Otherwise
it would effectively be ignored.

Option -hdachs still has no effect on -drive, but that seems best.
Signed-off-by: NMatthew Ogilvie <mmogilvi_qemu@miniinfo.net>
Signed-off-by: Nmalc <av1474@comtv.ru>

> This instruction is always treated as a register-to-register (MOD = 11)
> instruction, regardless of the encoding of the MOD field in the MODR/M
> byte.

Also, Microport UNIX System V/386 v 2.1 (ca 1987) runs fine on
real Intel 386 and 486 CPU's (at least), but does not run in qemu without
this patch.
Signed-off-by: NMatthew Ogilvie <mmogilvi_qemu@miniinfo.net>
Signed-off-by: Nmalc <av1474@comtv.ru>

These are normally ifdefed out and don't matter.  But if you enable
them, they ought to be correct.
Signed-off-by: NMatthew Ogilvie <mmogilvi_qemu@miniinfo.net>
Signed-off-by: Nmalc <av1474@comtv.ru>

We do not register ioeventfds unless the IVSHMEM_IOEVENTFD feature
is set.  The same feature must be checked before releasing the eventfds.
Regression introduced by commit 563027cc (ivshmem: use EventNotifier and
memory API, 2012-07-05).
Reported-by: NCam Macdonnell <cam@cs.ualberta.ca>
Tested-by: NCam Macdonnell <cam@cs.ualberta.ca>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

object_deinit is only called when the reference count goes to zero,
and yet tries to do an object_unparent.  Now, object_unparent
either does nothing or it will decrease the reference count.
Because we know the reference count is zero, the object_unparent
call in object_deinit is useless.

Instead, we need to disconnect the object from its parent just
before we remove the last reference apart from the parent's.  This
happens in object_delete.  Once we do this, all calls to
object_unparent peppered through QEMU can go away.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Reported-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Commits b5dc7732 and
be24bb4f optimized the code
and removed the correct setting of t0. Fix this.

gcc-4.7 detected this bug because parameter arg1 was unused
but set in set_HIT0_LO and set_HI_LOT0.

Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

While running in the usermode emulator all of the required*
MIPS32r2 RDHWR hardware registers should be accessible (the
Linux kernel enables access to these same registers).  Note
that these registers are still enabled when the MIPS ISA is
not release 2.  This is OK since the Linux kernel emulates
access to them when they are not available in hardware.

* There is also the ULR register which is only recommended
  for full release 2 compliance.  Incidentally, accessing
  this register in the current implementation works fine
  without flipping its access bit.
Signed-off-by: NMeador Inge <meadori@codesourcery.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

At some point in the past, the OPEN event was changed to be issued from a
bottom half.  This creates a small window whereas a data callback registered in
init may be invoked before the OPEN event has been issued.

This is reproducible with:

 echo "{'execute': 'qmp_capabilities'}" | qemu-system-x86_64 -M none -qmp stdio

We can fix this for the monitor by moving the parser initialization to init.

The remaining state that is set in OPEN appears harmless.
Reported-by: NDaniel Berrange <berrange@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This allows any QEMU binary to be executed with:

  $QEMU_BINARY -M none -qmp stdio

Without errors from missing options that are required by various boards.  This
also provides a mode that we can use in the future to construct machines
entirely through QMP commands.

Cc: Daniel Berrange <berrange@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* qmp/queue/qmp:
  migration: move total_time from ram stats to migration info
  monitor: avoid declaring unused variables
  qapi: Fix memory leak

* sstabellini/xen-fixes-20120822:
  xen-all.c: fix multiply issue for int and uint types
  Fix invalidate if memory requested was not bucket aligned

* bonzini/scsi-next:
  virtio-scsi: add backwards-compatibility properties for 1.1 and earlier machines
  iscsi: fix races between task completion and abort
  iscsi: simplify iscsi_schedule_bh
  iscsi: move iscsi_schedule_bh and iscsi_readv_writev_bh_cb
  Revert "iscsi: Fix NULL dereferences / races between task completion and abort"

* kwolf/for-anthony:
  virtio-blk: hide VIRTIO_BLK_F_CONFIG_WCE from old machine types
  Documentation: Warn against qemu-img on active image
  vmdk: Read footer for streamOptimized images
  vmdk: Fix header structure

Conflicts:
	hw/virtio-blk.c

* kraxel/usb.59:
  ehci: Fix setting of halt bit from usbcmd register updates
  ehci: fix Interrupt Threshold Control implementation
  usb: update uas product id
  usb: async control xfer fixup

Add a 'query-target' QAPI command to allow management applications
to determine what target architecture a QEMU binary is emulating
without having to parse the binary name or -help output

  $ qmp-shell -p /tmp/qemu
  (QEMU) query-target
  {   u'return': {   u'arch': u'x86_64' }}
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Adopt the QOM parent field name and enforce QOM-style access via casts.
Don't just typedef PCIHostState, either use it directly or embed it.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Use PCIHostState and PCI_HOST_BRIDGE() where appropriate.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The preceding commits fixed misuses of FROM_SYSBUS() that led people to
add a bogus busdev field. For qdev the field order was less relevant but
for QOM the PCIHostState field (including the SysBusDevice actually
initialized with a value) must be placed first within the state struct.

To facilitate accessing the PCIHostState fields, derive all PCI host
bridges from TYPE_PCI_HOST_BRIDGE rather than TYPE_SYS_BUS_DEVICE.

We can now access PCIHostState QOM-style, with PCI_HOST_BRIDGE() macro.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NWanpeng Li <liwanp@linux.vnet.ibm.com>
Signed-off-by: NAndreas Färber <andreas.faerber@web.de>
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>