Replace op_andi_... with tcg_gen_andi_tl.
Signed-off-by: NAndreas Faerber <andreas.faerber@web.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5218 c046a42c-6fe2-441c-8c8c-71466251a162

Introduce TCG variables cpu_{ctr,lr} and replace op_{load,store}_{lr,ctr}
with tcg_gen_mov_tl.
Signed-off-by: NAndreas Faerber <andreas.faerber@web.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5217 c046a42c-6fe2-441c-8c8c-71466251a162

This patch creates tests/alpha directory and adds an "hello world"
program as well as two tests.
Signed-off-by: NTristan Gingold <gingold@adacore.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5216 c046a42c-6fe2-441c-8c8c-71466251a162

In CP0 Index register, bit 31 means 'Probe Failure', while lowest bits
contain the TLB index.

In tlbwi and tlbwr instructions, this Probe Failure bit must be ignored
when reading the TLB index.

Attached patch fixes it.

(Hervé Poussineau)

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5215 c046a42c-6fe2-441c-8c8c-71466251a162

cpu_mips_irqctrl_init() function in hw/mips_timer.c is empty.
Attached patch removes it, and its callers.

(Hervé Poussineau)

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5214 c046a42c-6fe2-441c-8c8c-71466251a162

Attached patch fixes a warning in cpu_mips_find_by_name().
'name' is a string, so it should be declared as char*, not unsigned char*.

(Hervé Poussineau)

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5213 c046a42c-6fe2-441c-8c8c-71466251a162

the content of target-alpha/helper.h is duplicated twice

(Tristan Gingold)

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5212 c046a42c-6fe2-441c-8c8c-71466251a162

according to the alpha arch reference, the literal field of an operate
instruction is unsigned:

If bit <12> of the instruction is 1, an 8-bit zero-extended literal
constant is formed by bits
<20:13> of the instruction. The l teral is interpreted as a positive
integer bet ween 0 and 255
and is zero-extended to 64 bits.

This patch fixes the mis-interpretation of the literal field.

(Tristan Gingold)

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5211 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5210 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5209 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5208 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5207 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5206 c046a42c-6fe2-441c-8c8c-71466251a162

This patch adds support for removing USB devices by host address.
Which is usefull for things like libvirtd because there is no easy way to
find guest USB address of the host device.
In other words you can now do:
   usb_add host:3.5
   ...
   usb_del host:3.5
Before the patch 'usb_del' did not support 'host:' notation.

----
Syntax for specifying auto connect filters has been improved.
Old syntax was
    host:bus.dev
    host:pid:vid
New syntax is
    host:auto:bus.dev[:pid:vid]
In both the cases any attribute can be set to "*".

New syntax is more flexible and lets you do things like
    host:3.*:5533:* /* grab any device on bus 3 with vendor id 5533 */

It's now possible to remove auto filters. For example:
    usb_del host:auto:3.*:5533:*

Active filters are printed after all host devices in 'info usb' output.
Which now looks like this:

  Device 1.1, speed 480 Mb/s
    Hub: USB device 1d6b:0002, EHCI Host Controller
  Device 1.4, speed 480 Mb/s
    Class 00: USB device 1058:0704, External HDD
  Auto filters:
    Device 3.* ID *:*
Signed-off-by: NMax Krasnyansky <maxk@kernel.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5205 c046a42c-6fe2-441c-8c8c-71466251a162

USB is 99.8% async now :). 0.2% is the three control requests that
we need to execute synchronously. We could off-load that to a thread
or something but it's not worth the pain since those requests are
performed only during device initialization (ie when device is
connected to the VM).

The change is a bit bigger than I wanted due to the fact that generic
handle_packet()/handle_control() interface was not designed for
async transactions. So I ended up adding custom handle_packet()
code to usb-linux. We can make that generic if/when some other
component needs it.
Signed-off-by: NMax Krasnyansky <maxk@kernel.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5204 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5203 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5202 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5201 c046a42c-6fe2-441c-8c8c-71466251a162

realpath will horribly mangle a protocol so avoid calling it if the backing
file is a protocol.



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5200 c046a42c-6fe2-441c-8c8c-71466251a162

Transaction lifetime was originally set to 10 frames. That was an arbitrary
number I picked without much thinking :).
I'm changing that to 32 frames because things like interrupt transfers
and such are scheduled at that rate. It seems like 1/32 is accepted as
lowest supported rate. OHCI, for example, defines exactly 32 interrupt
heads.

While testing USB webcam under XP I noticed that interrupt transactions were
being canceled and then resubmitted on a regular basis, which works but is a
waste of CPU cycles. This change fixes that.
All other devices I have are not affected.
Signed-off-by: NMax Krasnyansky <maxk@kernel.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5199 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5198 c046a42c-6fe2-441c-8c8c-71466251a162

OpenBSD doesn't use AIO so don't try to build compatfd when not using AIO.

Also make sure to call qemu_aio_init() from bdrv_init.  Everything that uses
bdrv calls bdrv_init so it makes sense to init aio from there instead of
in every single tool.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5197 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5196 c046a42c-6fe2-441c-8c8c-71466251a162

Otherwise, we'll idle at 100% cpu.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5195 c046a42c-6fe2-441c-8c8c-71466251a162

It turns out, we're never reading from the signalfd() which is causing it to
remain readable forever.  I'll fix this up but I thought I'd commit this fix
in the interim.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5194 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5193 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5192 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5191 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5190 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5189 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5188 c046a42c-6fe2-441c-8c8c-71466251a162

This patch introduces signalfd() to work around the signal/select race in
checking for AIO completions.  For platforms that don't support signalfd(), we
emulate it with threads.

There was a long discussion about this approach.  I don't believe there are any
fundamental problems with this approach and I believe eliminating the use of
signals is a good thing.

I've tested Windows and Linux using Windows and Linux guests.  I've also checked
for disk IO performance regressions.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5187 c046a42c-6fe2-441c-8c8c-71466251a162

This patch removes "BlockDriverState *bs" from nbd_negotiate() because
it is not used.
Signed-off-by: NLaurent Vivier <Laurent.Vivier@bull.fr>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5186 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5185 c046a42c-6fe2-441c-8c8c-71466251a162

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5184 c046a42c-6fe2-441c-8c8c-71466251a162

While QEMU officially uses SVN, there are a number of unofficial git
repositories that many developers use.  Adding a .gitignore (derived from the
svn:ignore) will make their lives a lot easier.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5183 c046a42c-6fe2-441c-8c8c-71466251a162

As discussed in
http://lists.gnu.org/archive/html/qemu-devel/2008-08/msg00667.html,
current pxe boot is broken for some use cases. The problem
goes away if we reduce the number of allowed bits in the address space
to 32 (which has the side effect of reducing guest max mem size to 4Gb).

After digging for a while, it turns out that it happens because pxelinux
tries to access address 0x10009e9a6, which does not fit a 32-bit address.
A closer look, however, reveals this access is totally valid: It's just
0x9e9a6 with an add carry.

To avoid this, this patch casts the address passed to the POPL macro to
a 32-bit value. This is also done, although just theorectically, for
PUSHL too.
Signed-off-by: NGlauber Costa <glommer@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Reported-by: NChris Lalancette <clalance@redhat.com>
CC: Eduardo Habkost <ehabkost@redhat.com>



git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5182 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5181 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NPaul Brook <paul@codesourcery.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5180 c046a42c-6fe2-441c-8c8c-71466251a162

Signed-off-by: NPaul Brook <paul@codesourcery.com>


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5179 c046a42c-6fe2-441c-8c8c-71466251a162