Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

When using encrypted disk images, QEMU will prompt the user
for passwords when started.

This makes sense for the user protocol, but doesn't for QMP.

The solution is to have Monitor command which allows the user
or a Client to set passwords in advance, so that we avoid
the prompt completely.

This is what block_passwd does, for example:

(QEMU) block_passwd ide0-hd0 foobar
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Interrupt disable bit is mandatory in PCI spec.
Implement it to make devices spec compliant.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NIsaku Yamahata <yamahata@valinux.co.jp>

interrupt status is a mandatory feature in PCI spec,
so devices must implement it to be spec compliant.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NIsaku Yamahata <yamahata@valinux.co.jp>

This rearranges code in preparation for interrupt state
implementation.
Changes:
	- split up bus walk away from interrupt handling
          into a subroutine
	- change irq_state from an array to bitmask
	- verify that irq_state values are 0 or 1 on load

There are no functional changes.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Acked-by: NIsaku Yamahata <yamahata@valinux.co.jp>

Function mask is a mandatory feature in MSIX
spec so not implementing it is a spec violation.
Implement.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

rename ENABLE_OFFSET -> CONTROL_OFFSET, since
same byte includes function mask.
This is in preparation for function mask support.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

The multicore CPUID code detects whether the guest is an Intel or an
AMD CPU, because the Linux kernel is picky about the CmpLegacy bit.
KVM by default passes through the host's vendor, which was not
catched by the code. So fork out the vendor determining bits into a
separate function to be used from both places and always get the real
vendor.
This fixes KVM's multicore setup on Intel CPUs.
Signed-off-by: NAndre Przywara <andre.przywara@amd.com>
Reported-by: NDietmar Maurer <dietmar@proxmox.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

KVM_GET_MSR_INDEX_LIST returns -E2BIG when the provided space is too
small for all MSRs. But this is precisely the error we trigger with the
initial request in order to obtain that size. Do not fail in that case.

This caused a subtle corruption of the guest state as MSR_STAR was not
properly saved/restored. The corruption became visible with latest kvm
optimizing the MSR updates.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Darwin/ppc64 does not use function descriptors,
adapt prologue and tcg_out_call accordingly.
GPR2 is available for general use, so let's use it.

http://developer.apple.com/mac/library/documentation/DeveloperTools/Conceptual/LowLevelABI/110-64-bit_PowerPC_Function_Calling_Conventions/64bitPowerPC.html

v2:
- Don't mark reserved GPR13 as callee-save.
- Move tcg_out_b up.
- Fix unused variable warning in prologue.
Signed-off-by: NAndreas Faerber <andreas.faerber@web.de>
Cc: malc <av1474@comtv.ru>
Signed-off-by: Nmalc <av1474@comtv.ru>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This patch adds information about who handles what when it comes to S390.
I'll gladly support anything that's related to the device emulation model and
S390 KVM parts.

Since this patchset doesn't implement S390 CPU emulation, I left that part
with a question mark. As soon as Uli's patchset gets committed I'd recommend
setting him there.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

All "normal" system emulation targets in qemu I'm aware of display output
on either VGA or serial output.

Our S390x virtio machine doesn't have such kind of legacy hardware. So
instead we need to default to a virtio console.

I'm not particularly proud of this patch. It would be a lot better to
have something in the machine description that tells us about the default
terminal.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

In order to debug funny kernel breakages it's always good to have a working
gdb stub around.

While Uli's patches don't include one one, I needed one that's at least good
enough for 'bt' and some variable examinations during early bootup.

So here it is - the absolute basics to get the qemu gdb stub running with s390x
targets.
Sgined-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

In order to use the new S390x virtio bus we just introduced, we also
need a machine description that sets up the machine according to our
PV specification.

Let's add that machine description and be happy!
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

On S390x we don't want to go through the hassle of emulating real existing
hardware, because we don't need to for running Linux.

So let's instead implement a machine that is 100% based on VirtIO which we
fortunately implement already.

This patch implements the bus that is the groundwork for such an S390x
virtio machine.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Let's enable the basics for system emulation so we can run virtual machines
with KVM!
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

KVM on S390x requires the virtual address space of the guest's RAM to be
within the first 256GB.

The general direction I'd like to see KVM on S390 move is that this requirement
is losened, but for now that's what we're stuck with.

So let's just hack up qemu_ram_alloc until KVM behaves nicely :-).
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

S390x was one of the first platforms that received support for KVM back in the
day. Unfortunately until now there hasn't been a qemu implementation that would
enable users to actually run guests.

So let's include support for KVM S390x in qemu!
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Qemu won't let us run a KVM target without having host TCG support. Well, for
now we don't have any so let's implement a fake target that only stubs out
everything.

I tried to keep the patch as close to Uli's source as possible, so whenever
he feels like it he can easily diff his version against this one.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

This patch makes configure aware of S390 hosts and guests. When not explicitly
defined using --target-list= no S390 targets will be built though.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Because Qemu currently requires a TCG target to exist and there are quite some
useful helpers here to lay the groundwork for out KVM target, let's create a
stub TCG emulation target for S390X CPUs.

This is required to make tcg happy. The emulation target itself won't work
though.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Fixes OpenBSD build.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Fix mingw32 build.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Partially fixes mingw32 build.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This implements the audio control or volume read support as needed by
some systems. A Conectiva Parolin system required this to detect an IDE
device as CD-ROM, through the CDVOLREAD ioctl.
Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Some PAGE constants were used instead of the macros we already have
defined in internal.h.
Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@holoscopio.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

* buf was too small for longer register names.
* Use consistent upper case for nouns in register names.
* Use better name for array with e100 register names.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Since commit a992fe3d
config-devices.h is no longer used.

So there is no need to keep the dependency rules
any longer.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This should avoid truncating the register name when debugging.
Signed-off-by: NDavid Benjamin <davidben@mit.edu>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

In mb_mod_length a return value is stored that is negative in error case. With
an unsigned type the check goes wrong.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Checking for nbytes < 0 is pointless as long as it's a size_t. If we want to
use negative numbers for error codes, we should use signed types.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>