Signed-off-by: NFam Zheng <famz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

Pause the drive and start the block job, so we won't miss the block job.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

They wrap blkdebug "break" and "remove_break".

Add optional argument "resume" to cancel_and_wait().
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

iotests.py already has one.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Performing multiple drive-mirror blockjobs on the same qemu instance
results in the image file used for the block device being replaced by
the newly mirrored file, which is not what we want.

Fix this by performing one dedicated test per sync mode.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-id: 1385407736-13941-3-git-send-email-mreitz@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@amazon.com>

If an explicit driver option is present, but doesn't specify a valid
driver, then bdrv_open() should fail instead of probing the format.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>

This patch moves ret assignment after reporting original error.

We were lucky to pass qemu-iotests 048 (qemu-img compare case) but when
I tried to run with TEST_DIR=/tmp (tmpfs), it fails with a "wrong"
mismatch offset. This fixes two bugs.

In the first if branch, setting ret to 1 before using it makes dead code
in the next line: pnum is never added to mismatch offset even if ret was
0.

In the other if branch, currently the output error is always -4:
  strerror(-4) -> Unknown error -4

Added regression test in case 048.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NAmos Kong <akong@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NFam Zheng <famz@redhat.com>

Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>

Add a new test case in file 041 for mirroring unbacked images in
"absolute-paths" mode. This should work, if possible, but most
importantly, qemu should never crash.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

If backing file doesn't exist, the error message is confusing and
misleading:

    $ qemu /tmp/a.qcow2
    qemu: could not open disk image /tmp/a.qcow2: Could not open file: No
    such file or directory

But...

    $ ls /tmp/a.qcow2
    /tmp/a.qcow2

    $ qemu-img info /tmp/a.qcow2
    image: /tmp/a.qcow2
    file format: qcow2
    virtual size: 8.0G (8589934592 bytes)
    disk size: 196K
    cluster_size: 65536
    backing file: /tmp/b.qcow2

Because...

    $ ls /tmp/b.qcow2
    ls: cannot access /tmp/b.qcow2: No such file or directory

This is not intuitive. It's better to have the missing file's name in
the error message. With this patch:

    $ qemu-io -c 'read 0 512' /tmp/a.qcow2
    qemu-io: can't open device /tmp/a.qcow2: Could not open backing
    file: Could not open '/stor/vm/arch.raw': No such file or directory
    no file open, try 'help open'

Which is a little bit better.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This tests the replay of a data sector in a VHDX image file.

The image file is a 10G dynamic image, with 4MB block size.  The
image was created with qemu-img, and the log left unplayed by
modification of the vhdx image format driver.

It was verified under both QEMU and Hyper-V that the image file,
post log replay, matched.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This removes the IMGFMT_GENERIC blocker for read-only, so existing
iotests run read/write tests for vhdx images created by qemu-img (e.g.
tests 001, 002, 003).

In addition, this updates the sample image test for the Hyper-V
created image, to verify we can write it as well.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The non-global option output is suppresed in _make_test_img() for
output verification in the 0?? tests.  This adds suppression for
the vhdx-unique options as well.  This allows check -vhdx to run
successfully.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

When creating images with backing files in the test, the backing
file argument was not quoted properly.  This caused the test to fail
when run from a pathname with a space.  Pass the backing argument in
with the -b option to _make_test_img, so it can be properly quoted.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

There were still a couple of instances of unquoted usage of
$TEST_IMG and $TEST_IMG.orig.  Quoted these so they will not fail
on pathnames with spaces in them.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Test 039 had $TEST_IMG with duplicate double quotes - remove duplicate.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

There were still instances of $TEST_IMG not being properly quoted.
This was in the usage of a string built up for a 'for' loop; modify
the loop so we can quote $TEST_IMG properly.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

$TEST_IMG.base is used unquoted. Add quotes so that pathnames with
spaces are supported.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

_make_test_img() currently works with spaced pathnames only when not
specifying a backing file.  This fixes it so that the backing file
argument is properly quoted.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The usage of $TEST_IMG was not properly quoted everywhere in
common.pattern.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The actual size of the image file may differ depending on the Linux
kernel currently running on the host. Filtering out this value makes
this test pass in such cases.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NBenoit Canet <benoit@irqsave.net>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Implement .bdrv_get_specific_info to return the extent information.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Case 030 occasionally fails because of block job compltes too fast to be
captured by script, and 'unexpected qmp event' of job completion causes
the test failure.

Simply fill in some data to the test image to make this false alarm less
likely to happen.

(For other benefits to prefill data to test image, see also commit
ab68cdfa).
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add a test case for trying to open an image file where it is impossible
to open its backing file (in this case, because it was deleted). When
doing this, qemu (or qemu-io in this case) should not crash but rather
print an appropriate error message.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

There's a same common function in iotests.py
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Commit 684b2544 forgot to update it.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add a test for saving a VM state from a qcow2 image and loading it back
(with having restarted qemu in between); this should work without any
problems.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Extend 060 by a test which creates a corrupted image with an active L2
entry pointing to an inactive L2 table and writes to the corresponding
guest offset.

Also, use overlap-check=all for all tests in 060.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Block devices creates with -drive and drive_add should automatically
disappear if the guest device is unplugged. blockdev-add ones shouldn't.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

IF_NONE allows read-only, which makes forbidding it in this place
for other types pretty much pointless.

Instead, make sure that all devices for which the check would have
errored out check in their init function that they don't get a read-only
BlockDriverState. This catches even cases where IF_NONE and -device is
used.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>

This is a header flag and we needs sparse for the header.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Convert "fprintf(stderr,..." and standardize error messages:

Remove a few local_error's and use errp.

Remove "VMDK:" or "Vmdk:" prefixes in error message and fix to upper
case.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Make use of the error parameter in the opening and creating functions in
block/raw-posix.c.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Move the blank line to above the test step banner, so it looks clearer
in blocks.
Signed-off-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

This adds the VHDX format to the qemu-iotests format, and adds
a read test.  The test reads from an existing sample image, that
was created with Hyper-V under Windwos Server 2012.

The image file is a 1GB dynamic image, with 32MB blocks.

The pattern 0xa5 exists from 0MB-33MB (past a block size boundary)

The pattern 0x96 exists from 33MB-66MB (past another block boundary,
and leaving a partial blank block)

From 66MB-1024MB, all reads should return 0.

Although 1GB dynamic image with 66MB of data, the bzip2'ed image
file size is only 874 bytes.

This also adds in the IMGFMT_GENERIC flag, so r/o images can be
tested (e.g. ./check -vhdx) without failing tests that assume
r/w support.
Signed-off-by: NJeff Cody <jcody@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add a new test case for discarding preallocated zero clusters; doing
this should not result in any leaks.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Add a test for the additional information now provided by qemu-img info
when used on qcow2 images. It also tests the qemu QMP output from the
query-block command when running qemu with different runtime options
than specified in the image (ImageInfoSpecific should always refer to
the image).
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

In _img_info, filter out additional information specific to the image
format provided by qemu-img info, since tests designed for multiple
image formats would produce different outputs for every image format
otherwise.

In a human-readable dump, that new information will always be last for
each "image information block" (multiple blocks are emitted when
inspecting the backing file chain). Every block is separated by an empty
line. Therefore, in this case, everything starting with the line "Format
specific information:" up to that empty line (or EOF, if it is the last
block) has to be stripped.

The JSON dump will always emit pretty JSON data. Therefore, the opening
and closing braces of every object will be on lines which are indented
by exactly the same amount, and all lines in between will have more
indentation. Thus, in this case, everything starting with a line
matching the regular expression /^ *"format-specific": {/ until /^ *},?/
has to be stripped, where the number of spaces at the beginning of the
respective lines is equal.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Because l2_allocate now frees the unused L2 cluster on error, the
according test cases in 026 don't result in one leaked cluster anymore.
Signed-off-by: NMax Reitz <mreitz@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>