Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

The code changed here is an unused data type name (evt_flush_occurred).
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Replace writeable -> writable
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Conflicts:
	exec.c

When we're trying to get a newly registered phys memory client updated
with the current page mappings, we end up passing the region offset
(a ram_addr_t) as the start address rather than the actual guest
physical memory address (target_phys_addr_t).  If your guest has less
than 3.5G of memory, these are coincidentally the same thing.  If
there's more, the region offset for the memory above 4G starts over
at 0, so the set_memory client will overwrite it's lower memory entries.

Instead, keep track of the guest phsyical address as we're walking the
tables and pass that to the set_memory client.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

When we register a physical memory client, we try to walk the page
tables, calling the set_memory hook for every entry.  Effectively
playing catchup for the client for everything already registered.
With this type, we only walk the 2nd entry of the l1 table,
typically missing all of the registered memory.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Used by HD audio controllers like our intel-hda.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

msi_init may fail, so we need to check on uninit if the cap was
actually installed. This also avoids that the users need to check.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

The general control register is a byte register.
Add support for byte reads.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

MDI control is a 32 bit register, but may be read or written using
8 or 16 bit access. Data is latched when the MSB is written.

Add support for byte/word read/write access.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

pointer is a 32 bit register, but may be written using 8 or 16 bit writes.
Add support for byte/word writes.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

port is a 32 bit register, but may be written using 8 or 16 bit writes.
Add support for byte/word writes.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Like other Intel devices, e100 (eepro100) uses little endian byte order.

This patch was tested with these combinations:

i386 host, i386 + mipsel guests (le-le)
mipsel host, i386 guest (le-le)
i386 host, mips + ppc guests (le-be)
mips host, i386 guest (be-le)

mips and mipsel hosts were emulated machines.

v2:
Use prefix for new functions. Add the same prefix to stl_le_phys.
Fix alignment of mem (needed for word/dword reads/writes).
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

QEMU sends frames smaller than 60 bytes to ethernet nics.
Such frames are rejected by real NICs and their emulations.
To avoid this behaviour, other NIC emulations pad received
frames. This patch enables this workaround for eepro100, too.

All related code is marked with CONFIG_PAD_RECEIVED_FRAMES,
so we can drop this in case QEMU's networking code is
ever changed.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

cppcheck reports that 'packet' is unused.

It was only used to calculate the size of the preceding data.
Removing it saves a lot of stack space (local variable rx).
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

When DEBUG_EEPRO100 was enabled, unsupported writes were logged twice.
Now logging in eepro100_write1 and eepro100_write2 is similar to the
logging in eepro100_write4 (which already was correct).
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Initialize scsi_len with zero when starting a new request, so any
stuff leftover from the previous request is cleared out.  This may
happen in case the data returned by the scsi command doesn't fit
into the buffer provided by the guest.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>