- 16 8月, 2012 1 次提交
-
-
由 Alexander Graf 提交于
When compiling the xbzrle code on my ppc32 user space, I hit the following gcc compiler warning (treated as an error): cc1: warnings being treated as errors savevm.c: In function ‘xbzrle_encode_buffer’: savevm.c:2476: error: overflow in implicit constant conversion Fix this by making the cast explicit, rather than implicit. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 15 8月, 2012 1 次提交
-
-
由 Corey Bryant 提交于
This patch converts all block layer close calls, that correspond to qemu_open calls, to qemu_close. Signed-off-by: NCorey Bryant <coreyb@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 08 8月, 2012 1 次提交
-
-
由 Orit Wasserman 提交于
For performance we are encoding long word at a time. For nzrun we use long-word-at-a-time NULL-detection tricks from strcmp(): using ((lword - 0x0101010101010101) & (~lword) & 0x8080808080808080) test to find out if any byte in the long word is zero. Signed-off-by: NBenoit Hudzia <benoit.hudzia@sap.com> Signed-off-by: NPetter Svard <petters@cs.umu.se> Signed-off-by: NAidan Shribman <aidan.shribman@sap.com> Signed-off-by: NOrit Wasserman <owasserm@redhat.com> Signed-off-by: NEric Blake <eblake@redhat.com> Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com> Reviewed-by: NEric Blake <eblake@redhat.com>
-
- 20 7月, 2012 6 次提交
-
-
由 Juan Quintela 提交于
We split it into 2 functions, foo_live_iterate, and foo_live_complete. At this point, we only remove the bits that are for the other stage, functionally this is equivalent to previous code. Signed-off-by: NJuan Quintela <quintela@redhat.com>
-
由 Juan Quintela 提交于
This patch splits stage 1 to its own function for both save_live users, ram and block. It is just a copy of the function, removing the parts of the other stages. Optimizations would came later. Signed-off-by: NJuan Quintela <quintela@redhat.com>
-
由 Juan Quintela 提交于
Enable the creation of a method to tell migration if that section is active and should be migrate. We use it for blk-migration, that is normally not active. We don't create the method for RAM, as setups without RAM are very strange O:-) Signed-off-by: NJuan Quintela <quintela@redhat.com>
-
由 Juan Quintela 提交于
Intead of abusing stage with value -1. Signed-off-by: NJuan Quintela <quintela@redhat.com>
-
由 Juan Quintela 提交于
Notice that the live migration users never unregister, so no problem about freeing the ops structure. Signed-off-by: NJuan Quintela <quintela@redhat.com>
-
由 Juan Quintela 提交于
This would make easier to add more operations in the next patches. Signed-off-by: NJuan Quintela <quintela@redhat.com>
-
- 29 6月, 2012 3 次提交
-
-
由 Juan Quintela 提交于
If buffers are full, don't iterate, just exit. Signed-off-by: NJuan Quintela <quintela@redhat.com>
-
由 Juan Quintela 提交于
This allows to know how long each section takes to save. An awk script like this tells us sections that takes more that 10ms $1 ~ /savevm_state_iterate_end/ { /* Print savevm_section_end line when > 10ms duration */ if ($2 > 10000) { printf("%s times_missing=%u\n", $0, times_missing++); } } Signed-off-by: NJuan Quintela <quintela@redhat.com> fix ws tracepoints Signed-off-by: NJuan Quintela <quintela@redhat.com>
-
由 Isaku Yamahata 提交于
Signed-off-by: NIsaku Yamahata <yamahata@valinux.co.jp>
-
- 18 6月, 2012 1 次提交
-
-
由 Anthony Liguori 提交于
This makes it easier to remove it from BusInfo. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> [AF: Drop now unnecessary NULL initialization in scsibus_get_dev_path()] Signed-off-by: NAndreas Färber <afaerber@suse.de>
-
- 15 6月, 2012 1 次提交
-
-
由 Paolo Bonzini 提交于
Writing vm state uses bdrv_pwrite, so it will automatically get flushes in writethrough mode. But doing a flush at the end in writeback mode is probably a good idea anyway. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 16 4月, 2012 1 次提交
-
-
由 Stefan Weil 提交于
tb.time is a time value, but not necessarily of the same size as time_t: while time_t is 64 bit for w64, tb.time still is 32 bit only. Therefore we need en explicit conversion. Signed-off-by: NStefan Weil <sw@weilnetz.de>
-
- 20 3月, 2012 1 次提交
-
-
由 Stefano Stabellini 提交于
- add an "is_ram" flag to SaveStateEntry; - register_savevm_live sets is_ram for live_savevm devices; - introduce a "xen-save-devices-state" QAPI command that can be used to save the state of all devices, but not the RAM or the block devices of the VM. Changes in v8: - rename save-devices-state to xen-save-devices-state. Changes in v7: - rename save_devices to save-devices-state. Changes in v6: - remove the is_ram parameter from register_savevm_live and sets is_ram if the device is a live_savevm device; - introduce save_devices as a QAPI command, write a better description for it; - fix CODING_STYLE; - introduce a new doc to explain the save format used by save_devices. Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com> Acked-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
- 17 3月, 2012 1 次提交
-
-
由 Amos Kong 提交于
VMSTATE_VARRAY_UINT32() is used in hw/ds1225y.c, and we checked VMS_VARRAY_UINT32 bit of field->flags in vmstate_load_state(), but we don't check this bit in vmstate_save_state(). Signed-off-by: NAmos Kong <akong@redhat.com> Acked-by: NJuan Quintela <quintela@redhat.com> Acked-by: NHervé Poussineau <hpoussin@reactos.org> Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>
-
- 15 3月, 2012 2 次提交
-
-
由 Luiz Capitulino 提交于
The migrate command is one of those commands where HMP and QMP completely mix up together. This made the conversion to the QAPI (which separates the command into QMP and HMP parts) a bit difficult. The first important change to be noticed is that this commit completes the removal of the Monitor object from migration code, started by the previous commit. Another important and tricky change is about supporting the non-detached mode. That is, if the user doesn't pass '-d' the migrate command will lock the monitor and will only release it when migration is finished. To support this in the new HMP command (hmp_migrate()), it is necessary to create a timer which runs every second and checks if the migration is still active. If it is, the timer callback will re-schedule itself to run one second in the future. If the migration has already finished, the monitor lock is released and the user can use it normally. All these changes should be transparent to the user. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
由 Luiz Capitulino 提交于
The Monitor object is passed back and forth within the migration/savevm code so that it can print errors and progress to the user. However, that approach assumes a HMP monitor, being completely invalid in QMP. This commit drops almost every single usage of the Monitor object, all monitor_printf() calls have been converted into DPRINTF() ones. There are a few remaining Monitor objects, those are going to be dropped by the next commit. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com> Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
-
- 09 1月, 2012 1 次提交
-
-
由 Avi Kivity 提交于
rom/device regions have a ram_addr that is composed of both an I/O handler (low bits) and RAM region (high bits); but qemu_ram_set_idstr() expects just a RAM region. Mask the I/O handler to make it happy. Tested-by: NStefan Weil <sw@weilnetz.de> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 04 1月, 2012 1 次提交
-
-
由 Avi Kivity 提交于
Currently creating a memory region automatically registers it for live migration. This differs from other state (which is enumerated in a VMStateDescription structure) and ties the live migration code into the memory core. Decouple the two by introducing a separate API, vmstate_register_ram(), for registering a RAM block for migration. Currently the same implementation is reused, but later it can be moved into a separate list, and registrations can be moved to VMStateDescription blocks. Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 15 12月, 2011 1 次提交
-
-
由 Kevin Wolf 提交于
This is a compatible extension to the snapshot header format that allows saving a 64 bit VM state size. Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 13 12月, 2011 4 次提交
-
-
由 Eduardo Habkost 提交于
This is what qemu_fclose() expects. Changes v1 -> v2: - Add braces to if statement to match coding style Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Eduardo Habkost 提交于
This is what qemu_fclose() expects. Changes v1 -> v2: - On success, keep returning pclose() return value, instead of always 0. Changes v2 -> v3: - Add braces on if statements to match coding style Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Eduardo Habkost 提交于
This will make sure no error will be missed as long as callers always check for qemu_fclose() return value. For reference, this is the complete list of qemu_fclose() callers: - exec_close(): already fixed to check for negative values, not -1 - migrate_fd_cleanup(): already fixed to consider only negative values as error, not any non-zero value - exec_accept_incoming_migration(): no return value check (yet) - fd_accept_incoming_migration(): no return value check (yet) - tcp_accept_incoming_migration(): no return value check (yet) - unix_accept_incoming_migration(): no return value check (yet) - do_savevm(): no return value check (yet) - load_vmstate(): no return value check (yet) Changes v1 -> v2: - Add small comment about the need to return previously-spotted errors Changes v2 -> v3: - Add braces to "if" statements to match coding style Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Eduardo Habkost 提交于
Some code uses qemu_file_set_error() already, so use it everywhere when setting last_error, for consistency. Signed-off-by: NEduardo Habkost <ehabkost@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 05 12月, 2011 1 次提交
-
-
由 Stefan Hajnoczi 提交于
Many places in QEMU call qemu_aio_flush() to complete all pending asynchronous I/O. Most of these places actually want to drain all block requests but there is no block layer API to do so. This patch introduces the bdrv_drain_all() API to wait for requests across all BlockDriverStates to complete. As a bonus we perform checks after qemu_aio_wait() to ensure that requests really have finished. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NKevin Wolf <kwolf@redhat.com>
-
- 02 12月, 2011 1 次提交
-
-
由 Dong Xu Wang 提交于
Signed-off-by: NDong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
-
- 22 11月, 2011 1 次提交
-
-
由 Anthony Liguori 提交于
Now when you try to migrate with ivshmem, you get a proper QMP error: (qemu) migrate tcp:localhost:1025 Migration is disabled when using feature 'peer mode' in device 'ivshmem' (qemu) Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 02 11月, 2011 1 次提交
-
-
由 Juan Quintela 提交于
Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 22 10月, 2011 1 次提交
-
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 20 10月, 2011 9 次提交
-
-
由 Juan Quintela 提交于
Make *save_live() return negative values when there is one error, and updates all callers to check for the error. Signed-off-by: NJuan Quintela <quintela@redhat.com>
-
由 Juan Quintela 提交于
Signed-off-by: NJuan Quintela <quintela@redhat.com>
-
由 Juan Quintela 提交于
Now the field contains the last error name, so rename acordingly. Signed-off-by: NJuan Quintela <quintela@redhat.com> Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Juan Quintela 提交于
Now the function returned errno, so it is better the new name. Signed-off-by: NJuan Quintela <quintela@redhat.com> Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Juan Quintela 提交于
make functions propagate errno, instead of just using -EIO. Add a comment about what are the return value of qemu_savevm_state_iterate(). Signed-off-by: NJuan Quintela <quintela@redhat.com>
-
由 Juan Quintela 提交于
We normally already have an errno value. When not, abuse EIO. Signed-off-by: NJuan Quintela <quintela@redhat.com>
-
由 Juan Quintela 提交于
This reverts commit eb60260d. Conflicts: savevm.c We changed qemu_peek_byte() prototype, just fixed the rejects. Signed-off-by: Juan Quintela<quintela@redhat.com> Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Juan Quintela 提交于
We add qemu_peek_buffer, that is identical to qemu_get_buffer, just that it don't update f->buf_index. We add a paramenter to qemu_peek_byte() to be able to peek more than one byte. Once this is done, to see if we have a subsection we look: - 1st byte is QEMU_VM_SUBSECTION - 2nd byte is a length, and is bigger than section name - 3rd element is a string that starts with section_name So, we shouldn't have false positives (yes, content could still get us wrong but probabilities are really low). v2: - Alex Williamsom found that we could get negative values on index. - Rework code to fix that part. - Rewrite qemu_get_buffer() using qemu_peek_buffer() v3: - return "done" on error case v4: - fix qemu_file_skip() off by one. Signed-off-by: NJuan Quintela <quintela@redhat.com>
-
由 Juan Quintela 提交于
Signed-off-by: Juan Quintela<quintela@redhat.com>
-