Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Socket buffer sizes were hard-coded to 4K for VDE and socket netdevs.  Bump this
up to 68K (ala tap netdev) to handle maximum GSO packet size (64k) plus plenty
of room for the ethernet and virtio_net headers.

Originally, ran into this limitation when using -netdev UDP sockets to connect
VM-to-VM, where VM interface is configure with MTU=9000.  (Using virtio_net
NIC model).  Test is simple: ping -M do -s 8500 <target>.  This test will
attempt to ping with unfragmented packet of given size.  Without patch, size
is limited to < 4K (minus protocol hdrs).  With patch, ping test works with pkt
size up to 9000 (again, minus protocol hdrs).

v2: per Stefan, increase buf size to (4096+65536) as done in tap and apply
    to vde and socket netdevs.
v1: increase buf size to 12K just for -netdev UDP sockets
Signed-off-by: NScott Feldman <sfeldma@cumulusnetworks.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NDmitry Fleytman <dmitry@daynix.com>
Signed-off-by: NYan Vugenfirer <yan@daynix.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NDmitry Fleytman <dmitry@daynix.com>
Signed-off-by: NYan Vugenfirer <yan@daynix.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

net_checksum_add_cont()
checksum calculation for scattered data with odd chunk sizes

net_raw_checksum()
checksum calculation for a buffer
Signed-off-by: NDmitry Fleytman <dmitry@daynix.com>
Signed-off-by: NYan Vugenfirer <yan@daynix.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Edivaldo reports a problem that the array of NetClientState in NICState is too
large - MAX_QUEUE_NUM(1024) which will wastes memory even if multiqueue is not
used.

Instead of static arrays, solving this issue by allocating the queues on demand
for both the NetClientState array in NICState and VirtIONetQueue array in
VirtIONet.

Tested by myself, with single virtio-net-pci device. The memory allocation is
almost the same as when multiqueue is not merged.

Cc: Edivaldo de Araujo Pereira <edivaldoapereira@yahoo.com.br>
Cc: qemu-stable@nongnu.org
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Recently, linux support multiqueue tap which could let userspace call TUNSETIFF
for a signle device many times to create multiple file descriptors as
independent queues. User could also enable/disabe a specific queue through
TUNSETQUEUE.

The patch adds the generic infrastructure to create multiqueue taps. To achieve
this a new parameter "queues" were introduced to specify how many queues were
expected to be created for tap by qemu itself. Alternatively, management could
also pass multiple pre-created tap file descriptors separated with ':' through a
new parameter fds like -netdev tap,id=hn0,fds="X:Y:..:Z". Multiple vhost file
descriptors could also be passed in this way.

Each TAPState were still associated to a tap fd, which mean multiple TAPStates
were created when user needs multiqueue taps. Since each TAPState contains one
NetClientState, with the multiqueue nic support, an N peers of NetClientState
were built up.

A new parameter, mq_required were introduce in tap_open() to create multiqueue
tap fds.
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch introduces a helper tap_get_ifname() to get the device name of tap
device. This is needed when ifname is unspecified in the command line and qemu
were asked to create tap device by itself. In this situation, the name were
allocated by kernel, so if multiqueue is asked, we need to fetch its name after
creating the first queue.

Only linux has this support since it's the only platform that supports
multiqueue tap.
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch introduce a new bit - enabled in TAPState which tracks whether a
specific queue/fd is enabled. The tap/fd is enabled during initialization and
could be enabled/disabled by tap_enalbe() and tap_disable() which calls platform
specific helpers to do the real work. Polling of a tap fd can only done when
the tap was enabled.
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch adds basic multiqueue support for qemu. The idea is simple, an array
of NetClientStates were introduced in NICState, parse_netdev() were extended to
find and match all NetClientStates belongs to the backend and place their
pointers in NICConf. Then qemu_new_nic can setup a N:N mapping between NICStates
that belongs to a nic and NICStates belongs to the netdev. And a queue_index
were introduced in NetClientState to track its index. After this, each peers of
a NICState were abstracted as a queue.

After this change, all NetClientState that belongs to the same backend/nic has
the same id. When use want to change the link status, all NetClientStates that
belongs to the same backend/nic will be also changed. When user want to delete
a device or netdev, all NetClientStates that belongs to the same backend/nic
will be deleted also. Changing or deleting an specific queue is not allowed.
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

To allow allocating an array of NetClientState and free it once, this patch
introduces destructor of NetClientState. Which could do type specific free,
which could be used by multiqueue to free the array once.
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

In multiqueue, all NetClientState that belongs to the same netdev or nic has the
same id. So this patches introduces an helper qemu_find_net_clients_except()
which finds all NetClientState with the same id. This will be used by multiqueue
networking.
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

To support multiqueue nic, this patch separate the nic destructor from
qemu_del_net_client() to a new helper qemu_del_nic() since the mapping bettween
NiCState and NetClientState were not 1:1 in multiqueue. The following patches
would refactor this function to support multiqueue nic.
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

To support multiqueue, this patch introduces a helper qemu_get_nic() to get
NICState from a NetClientState. The following patches would refactor this helper
to support multiqueue.
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

To support multiqueue, the patch introduce a helper qemu_get_queue()
which is used to get the NetClientState of a device. The following patches would
refactor this helper to support multiqueue.
Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJason Wang <jasowang@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

  This patch change all info call back function to take
additional QDict * parameter, which allow those command
take parameter. Now it is set to NULL at default case.
Signed-off-by: NWenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Move public headers to include/net, and leave private headers in net/.
Put the virtio headers in include/net/tap.h, removing the multiple copies
that existed.  Leave include/net/tap.h as the interface for NICs, and
net/tap_int.h as the interface for OS-specific parts of the tap backend.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>