Since the "bootindex" property is a QOM property and not a qdev property
now, we must alias it explicitly for virtio-net-pci, as well as CCW and
s390-virtio.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Remove bootindex form qdev property to qom, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add a qom property with the same name 'bootindex',
when we remove it form qdev property, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add a qom property with the same name 'bootindex',
when we remove it form qdev property, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add a qom property with the same name 'bootindex',
when we remove it form qdev property, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add a qom property with the same name 'bootindex',
when we remove it form qdev property, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add a qom property with the same name 'bootindex',
when we remove it form qdev property, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add a qom property with the same name 'bootindex',
when we remove it form qdev property, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.

At present, isa_ne2000 device does not support to boot
os, so we register two seprate qom getter/setter functions.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add a qom property with the same name 'bootindex',
when we remove it form qdev property, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add a qom property with the same name 'bootindex',
when we remove it form qdev property, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add a qom property with the same name 'bootindex',
when we remove it form qdev property, things will
continue to work just fine, and we can use qom features
which are not supported by qdev property.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

when we remove bootindex form qdev.property to qom.property,
we can use those functions set/get bootindex property for all
correlative devices. Meanwhile set the initial value of
bootindex to -1.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

When set a device's bootindex to -1, we remove it from global
fw_boot_order list.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add the function of updating bootindex about fw_boot_order list
in add_boot_device_path(). We should delete the old one if a
device has existed in global fw_boot_order list.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

We must assure that the changed bootindex can take effect
when guest is rebooted. So we introduce fw_cfg_machine_reset(),
which change the fw_cfg file's bootindex data using the new
global fw_boot_order list.
Signed-off-by: NChenliang <chenliang88@huawei.com>
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Introduce del_boot_device_path() to clean up fw_cfg content when
hot-unplugging a device that refers to a bootindex or update a
existent devcie's bootindex.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Signed-off-by: NChenliang <chenliang88@huawei.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Determine whether a given bootindex exists or not.
If exists, we report an error.
Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NGonglei <arei.gonglei@huawei.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

various s390x updates:
- cpu state handling in qemu and migration
- vhost-scsi-ccw bugfix

# gpg: Signature made Fri 10 Oct 2014 14:01:34 BST using RSA key ID C6F02FAF
# gpg: Can't check signature: public key not found

* remotes/cohuck/tags/s390x-20141010:
  s390x/virtio-ccw: fix vhost-scsi intialization
  s390x/migration: migrate CPU state
  s390x/kvm: synchronize the cpu state after SIGP (INITIAL) CPU RESET
  s390x/kvm: reuse kvm_s390_reset_vcpu() to get rid of ifdefs
  s390x/kvm: propagate s390 cpu state to kvm
  s390x/kvm: proper use of the cpu states OPERATING and STOPPED
  s390x/kvm: introduce proper states for s390 cpus
  linux-headers: update to 3.17-rc7
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

As usual, SLES11's GCC complained about double typedefs:

/home/cohuck/git/qemu/kvm-all.c:110: error: redefinition of typedef ‘KVMState’
/home/cohuck/git/qemu/include/sysemu/kvm.h:161: error: previous declaration of ‘KVMState’ was here
Reported-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Tested-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The vhost-scsi-ccw backend is of type VHostSCSICcw, not VirtIOSCSICcw.

This fixes a segfault when invoking

    qemu-system-s390x -device vhost-scsi-ccw,?
Reviewed-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Tested-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

This patch provides the cpu save information for dumps and later life
migration and enables migration of the CPU state. The code is based on
earlier work from Christian Borntraeger and Jason Herne.
Signed-off-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
[provide cpu_post_load()]
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
CC: Andreas Faerber <afaerber@suse.de>
CC: Christian Borntraeger <borntraeger@de.ibm.com>
CC: Jason J. Herne <jjherne@us.ibm.com>
Tested-by: NChristian Borntraeger <borntraeger@de.ibm.com>
[Cornelia Huck: tweaked cpu_post_load() comment]
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

We need to synchronize registers after a reset has been performed. The
current code does that in qemu_system_reset(), load_normal_reset() and
modified_clear_reset() for all vcpus. After SIGP (INITIAL) CPU RESET,
this needs to be done for the targeted vcpu as well, so let's call
cpu_synchronize_post_reset() in the respective handlers.
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
CC: Andreas Faerber <afaerber@suse.de>
Tested-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

This patch reuses kvm_s390_reset_vcpu() to get rid of some CONFIG_KVM and
CONFIG_USER_ONLY ifdefs in cpu.c.

In order to get rid of CONFIG_USER_ONLY, kvm_s390_reset_vcpu() has to provide a
dummy implementation - the two definitions are moved to the proper section in
cpu.h.
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
CC: Andreas Faerber <afaerber@suse.de>
Tested-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Let QEMU propagate the cpu state to kvm. If kvm doesn't yet support it, it is
silently ignored as kvm will still handle the cpu state itself in that case.

The state is not synced back, thus kvm won't have a chance to actively modify
the cpu state. To do so, control has to be given back to QEMU (which is already
done so in all relevant cases).

Setting of the cpu state can fail either because kvm doesn't support the
interface yet, or because the state is invalid/not supported. Failed attempts
will be traced
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
CC: Andreas Faerber <afaerber@suse.de>
Tested-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

This patch makes sure that halting a cpu and stopping a cpu are two different
things. Stopping a cpu will also set the cpu halted - this is needed for common
infrastructure to work (note that the stop and stopped flag cannot be used for
our purpose because they are already used by other mechanisms).

A cpu can be halted ("waiting") when it is operating. If interrupts are
disabled, this is called a "disabled wait", as it can't be woken up anymore. A
stopped cpu is treated like a "disabled wait" cpu, but in order to prepare for a
proper cpu state synchronization with the kvm part, we need to track the real
logical state of a cpu.
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
CC: Andreas Faerber <afaerber@suse.de>
Tested-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Until now, when a s390 cpu was stopped or halted, the number of running
CPUs was tracked in a global variable. This was problematic for migration,
so Jason came up with a per-cpu running state.
As it turns out, we want to track the full logical state of a target vcpu,
so we need real s390 cpu states.

This patch is based on an initial patch by Jason Herne, but was heavily
rewritten when adding the cpu states STOPPED and OPERATING. On the way we
move add_del_running to cpu.c (the declaration is already in cpu.h) and
modify the users where appropriate.

Please note that the cpu is still set to be stopped when it is
halted, which is wrong. This will be fixed in the next patch. The LOAD and
CHECK-STOP state will not be used in the first step.
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
[folded Jason's patch into David's patch to avoid add/remove same lines]
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
CC: Andreas Faerber <afaerber@suse.de>
Tested-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Sync headers with 3.17-rc7
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Four changes here.  Polling for reconnection of character devices,
the QOMification of accelerators, a fix for -kernel support on x86, and one
for a recently-introduced virtio-scsi optimization.

# gpg: Signature made Thu 09 Oct 2014 14:36:50 BST using RSA key ID 4E6B09D7
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg:                 aka "Paolo Bonzini <bonzini@gnu.org>"

* remotes/bonzini/tags/for-upstream: (28 commits)
  qemu-char: Fix reconnect socket error reporting
  qemu-sockets: Add error to non-blocking connect handler
  qemu-error: Add error_vreport()
  virtio-scsi: fix use-after-free of VirtIOSCSIReq
  linuxboot: compute initrd loading address
  kvm: Make KVMState be the TYPE_KVM_ACCEL instance struct
  accel: Create accel object when initializing machine
  accel: Pass MachineState object to accel init functions
  accel: Rename 'init' method to 'init_machine'
  accel: Move accel init/allowed code to separate function
  accel: Remove tcg_available() function
  accel: Move qtest accel registration to qtest.c
  accel: Move Xen registration code to xen-common.c
  accel: Move KVM accel registration to kvm-all.c
  accel: Report unknown accelerator as "not found" instead of "does not exist"
  accel: Make AccelClass.available() optional
  accel: Use QOM classes for accel types
  accel: Move accel name lookup to separate function
  accel: Simplify configure_accelerator() using AccelType *acc variable
  accel: Create AccelType typedef
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

If reconnect was set, errors wouldn't always be reported.
Fix that and also only report a connect error once until a
connection has been made.

The primary purpose of this is to tell the user that a
connection failed so they can know they need to figure out
what went wrong.  So we don't want to spew too much
out here, just enough so they know.
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

An error value here would be quite handy and more consistent
with the rest of the code.
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
[Make sure SO_ERROR value is passed to error_setg_errno. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Needed to nicely print socket error reports.
Signed-off-by: NCorey Minyard <cminyard@mvista.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

scsi_req_continue can complete the request and cause the VirtIOSCSIReq
to be freed.  Fetch req->sreq just once to avoid the bug.
Reported-by: NRichard Jones <rjones@redhat.com>
Tested-by: NRichard Jones <rjones@redhat.com>
Reviewed-by: NFam Zheng <famz@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Even though hw/i386/pc.c tries to compute a valid loading address for the
initrd, close to the top of RAM, this does not take into account other
data that is malloced into that memory by SeaBIOS.

Luckily we can easily look at the memory map to find out how much memory is
used up there.  This patch places the initrd in the first four gigabytes,
below the first hole (as returned by INT 15h, AX=e801h).

Without this patch:
[    0.000000] init_memory_mapping: [mem 0x07000000-0x07fdffff]
[    0.000000] RAMDISK: [mem 0x0710a000-0x07fd7fff]

With this patch:
[    0.000000] init_memory_mapping: [mem 0x07000000-0x07fdffff]
[    0.000000] RAMDISK: [mem 0x07112000-0x07fdffff]

So linuxboot is able to use the 64k that were added as padding for
QEMU <= 2.1.
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Now that we create an accel object before calling machine_init, we can
simply use the accel object to save all KVMState data, instead of
allocationg KVMState manually.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Create an actual TYPE_ACCEL object when initializing a machine. This
will allow accelerator classes to implement some initialization on
instance_init, and to save state on the TYPE_ACCEL object.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Most of the machine options and machine state information is in the
MachineState object, not on the MachineClass. This will allow init
functions to use the MachineState object directly instead of
qemu_get_machine_opts() or the current_machine global.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

linux-user pull for 2.2

Clearest linux-user patches sent to the list since august,
Apart from Mikhails patch, the rest are quite trivial.

v2: check for CONFIG_TIMERFD only after it has been defined

# gpg: Signature made Mon 06 Oct 2014 20:08:10 BST using RSA key ID DE3C9BC0
# gpg: Good signature from "Riku Voipio <riku.voipio@iki.fi>"
# gpg:                 aka "Riku Voipio <riku.voipio@linaro.org>"

* remotes/riku/tags/pull-linux-user-20141006-2:
  translate-all.c: memory walker initial address miscalculation
  linux-user: don't include timerfd if not needed
  linux-user: Simplify timerid checks on g_posix_timers range
  linux-user: Convert blkpg to use a special subop handler
  linux-user: Enable epoll_pwait syscall for ARM
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The initial base address is miscalculated in walk_memory_regions().
It has to be shifted TARGET_PAGE_BITS more. Holder variables are
extended to target_ulong size otherwise they don't fit for MIPS N32
(a 32-bit ABI with a 64-bit address space) and qemu won't compile.
The issue led to incorrect debug output of memory maps and a
mis-formed coredumped file.
Signed-off-by: NMikhail Ilyin <m.ilin@samsung.com>
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>

Without this, builds on older systems fail with:

qemu/linux-user/syscall.c:61:25: warning: sys/timerfd.h: No such file or directory

v2: fix the usual case where CONFIG_TIMERFD is enabled..
Signed-off-by: NRiku Voipio <riku.voipio@linaro.org>