PAPR requires that the device tree's CPU nodes have several properties
with information about the L1 cache.  We already create two of these
properties, but with incorrect names - "[id]cache-block-size" instead
of "[id]-cache-block-size" (note the extra hyphen).

We were also missing some of the required cache properties.  This
patch adds the [id]-cache-line-size properties (which have the same
values as the block size properties in all current cases).  We also
add the [id]-cache-size properties.

Adding the cache sizes requires some extra infrastructure in the
general target-ppc code to (optionally) set the cache sizes for
various CPUs.  The CPU family descriptions in translate_init.c can set
these sizes - this patch adds correct information for POWER7, I'm
leaving other CPU types to people who have a physical example to
verify against.  In addition, for -cpu host we take the values
advertised by the host (if available) and use those to override the
information based on PVR.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

For the pseries machine, we need to advertise to the guest the size of its
RMA - that is the amount of memory it can access with the MMU off.  For HV
KVM, this is constrained by the hardware limitations on the virtual RMA of
one hash PTE per PTE group in the hash page table.  We already had code to
calculate this, but it was assuming the VRMA page size was the same as the
(host) backing page size for guest RAM.

In the case of a host kernel configured for 64k base page size, but running
on hardware (or firmware) which only allows 4k pages, the hose will do all
its allocations with a 64k page size, but still use 4k hardware pages for
actual mappings.  Usually that's transparent to things running under the
host, but in the case of the maximum VRMA size it's not.

This patch refines the RMA size calculation to instead use the largest
available hardware page size (as reported by the SMMU_INFO call) which is
less than or equal to the backing page size.  This now gives the correct
RMA size in all cases I've tested.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NAlexander Graf <agraf@suse.de>

When using profiling, we rely on profile_getclock() being available
at our disposal. Somehow that function got moved from an indirect
include we used to have in translate-init.c, so that we were now
left not properly compiling anymore.

Add an explicit include to timer.h which defines profile_getclock,
so that we can compile again.
Signed-off-by: NAlexander Graf <agraf@suse.de>

On -M mac99, we can run 970 CPUs. However, these CPUs define the initial
instruction pointer they start execution at as part of their bootup protocol,
so effectively it's up to the board to decide where they start.

This went unnoticed, because they used to boot at the same location our flash
was mapped to, but due to the recent reset changes our 970 CPUs want to reset
to 0x100 now, which is always a 0 instruction.

Set the initial IP to something reasonable for -M mac99.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NFabien Chouteau <chouteau@adacore.com>

Enable the KVM emulated watchdog if KVM supports (use the
capability enablement in watchdog handler). Also watchdog exit
(KVM_EXIT_WATCHDOG) handling is added.
Watchdog state machine is cleared whenever VM state changes to running.
This is to handle the cases like return from debug halt etc.
Signed-off-by: NBharat Bhushan <bharat.bhushan@freescale.com>
[agraf: rebase to current code base, fix non-kvm cases]
Signed-off-by: NAlexander Graf <agraf@suse.de>

Based on kvm.git queue branch with commit e1e2e605.
Signed-off-by: NAlexander Graf <agraf@suse.de>

Broken in b5a73f8d, the carry itself was
fixed in 79482e5a.  But we still need to
produce the full 64-bit addition.

Simplify the conditions at the top of the functions for when we need a
new temporary.  Only plain addition is important enough to warrent avoiding
the temporary, and the extra tcg move op that would come with it.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Reviewed-by: NAurelien Jarno <aurelien@aurel32.net>
Tested-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Signed-off-by: NFabien Chouteau <chouteau@adacore.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

According to the different user's manuals, the vector offset for system
reset (both /HRESET and /SRESET) is 0x00100.

This patch may break support of some executables, as the power-on start
address may change. For a specific board, if the power-on start address
is different than HRESET vector (i.e. 0x00000100 or 0xfff00100), this
should be fixed in board's initialization code.
Signed-off-by: NFabien Chouteau <chouteau@adacore.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The overflow computation of nego and subf*o instructions has been broken
in commit ffe30937. Contrary to other targets, the instruction is subtract
from an not subtract on PowerPC.

This patch fixes the issue by using the correct argument in the xor
computation. Thanks to Peter Maydell for the hint.

With this change the PPC emulation passes the Gwenole Beauchesne
testsuite again.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This value is not needed if we use correctly the MSR[IP] bit.

excp_prefix is always 0x00000000, except when the MSR[IP] bit is
implemented and set to 1, in that case excp_prefix is 0xfff00000.

The handling of MSR[IP] was already implemented but not used at reset
because the value of env->msr was changed "manually".

The patch uses the function hreg_store_msr() to set env->msr, this
ensures a good handling of MSR[IP] at reset, and therefore a good value
for excp_prefix.
Signed-off-by: NFabien Chouteau <chouteau@adacore.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Older KVM versions don't support EPR which breaks guests when we announce
MPIC variants that support EPR.

Catch that case and expose only MPIC version 2.0 which tells the guest that
we don't support the EPR capability yet.
Signed-off-by: NStuart Yoder <stuart.yoder@freescale.com>
[agraf: Add comment, route cap check through kvm_ppc.c]
Signed-off-by: NAlexander Graf <agraf@suse.de>

ISEL is a Power ISA 2.06 instruction and thus is available on POWER7.
Given this is trapped and emulated by the Linux kernel, I guess it went
unnoticed.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

# By Liu Yuan (4) and others
# Via Stefan Hajnoczi
* stefanha/block:
  sheepdog: fix loadvm operation
  sheepdog: resend write requests when SD_RES_READONLY is received
  sheepdog: add helper function to reload inode
  sheepdog: add SD_RES_READONLY result code
  sheepdog: cleanup find_vdi_name
  rbd: Fix use after free in rbd_open()
  block: Disable driver-specific options for 1.5
  sheepdog: implement .bdrv_co_is_allocated()
  sheepdog: use BDRV_SECTOR_SIZE
  sheepdog: add discard/trim support for sheepdog
  block/ssh: Require libssh2 >= 1.2.8.

Message-id: 1366976682-10251-1-git-send-email-stefanha@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

# By Ed Maste (2) and others
# Via Stefan Hajnoczi
* stefanha/trivial-patches:
  bsd-user: Track change in FreeBSD SYSCTL(9) types
  virtio: Fix compilation without CONFIG_VHOST_SCSI
  qemu-doc: Option -ignore-environment removed.
  s390x: use CONFIG_INT128 to detect __uint128_t
  linux-user: fix compile error due to stray colon at end of #ifdef line

Message-id: 1366975563-16216-1-git-send-email-stefanha@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Currently the 'loadvm' opertaion works as following:
1. switch to the snapshot
2. mark current working VDI as a snapshot
3. rely on sd_create_branch to create a new working VDI based on the snapshot

This works not the same as other format as QCOW2. For e.g,

qemu > savevm # get a live snapshot snap1
qemu > savevm # snap2
qemu > loadvm 1 # This will steally create snap3 of the working VDI

Which will result in following snapshot chain:

base <-- snap1 <-- snap2 <-- snap3
          ^
          |
      working VDI

snap3 was unnecessarily created and might be annoying users.

This patch discard the unnecessary 'snap3' creation. and implement
rollback(loadvm) operation to the specified snapshot by
1. switch to the snapshot
2. delete working VDI
3. rely on sd_create_branch to create a new working VDI based on the snapshot

The snapshot chain for above example will be:

base <-- snap1 <-- snap2
          ^
          |
      working VDI

Cc: qemu-devel@nongnu.org
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NLiu Yuan <tailai.ly@taobao.com>
Reviewed-by: NMORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

When a snapshot is taken from out side of qemu (e.g. qemu-img
snapshot), write requests to the current vdi return SD_RES_READONLY.
In this case, the sheepdog block driver needs to update the current
inode to the latest one and resend the write requests.
Signed-off-by: NMORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This adds a helper function to update the current inode state with the
specified vdi object.
Signed-off-by: NMORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Sheepdog returns SD_RES_READONLY when qemu sends write requests to the
snapshot vdi.  This adds the result code and makes sd_strerror() print
its error reason.
Signed-off-by: NMORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

This makes 'filename' and 'tag' constant variables, and renames
'for_snapshot' to 'lock' to clear how it works.
Signed-off-by: NMORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Commit a9ccedc3 frees the QemuOpts for the driver-specific options
immediately, even though it still needs the filename string that is
contained there. This doesn't work. Move the deletion of the QemuOpts to
the end of the function where its content isn't needed any more.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

We don't want to commit to the API yet before everything is worked out.
Disable it for the 1.5 release. This commit is meant to be reverted
after the 1.5 release.

The disabling of the driver-specific options is achieved by applying the
old checks while parsing the command line.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NLiu Yuan <tailai.ly@taobao.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NLiu Yuan <tailai.ly@taobao.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

The 'TRIM' command from VM that is to release underlying data storage for
better thin-provision is already supported by the Sheepdog.

This patch adds the TRIM support at QEMU part.

For older Sheepdog that doesn't support it, we return 0(success) to upper layer.

Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NLiu Yuan <tailai.ly@taobao.com>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

libssh2 >= 1.2.8 is required to enable this block device (because
that version introduced the libssh2_session_handshake call).

Change the test to use pkg-config exclusively.  If the user requests
--enable-libssh2 and the minimum version is not available, then the
following error is displayed:

  $ ./configure --enable-libssh2

  ERROR: libssh2 >= 1.2.8 required for --enable-libssh2

If --enable-libssh2 is not specified, then the feature is silently
disabled if sufficiently new libssh2 is not available.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Originally from Garrett Cooper in FreeBSD PR ports/155558
http://www.freebsd.org/cgi/query-pr.cgi?pr=155558Signed-off-by: NEd Maste <emaste@freebsd.org>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Signed-off-by: NEd Maste <emaste@freebsd.org>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Has been removed in commit fc9c5412.
Signed-off-by: NThomas Schwinge <thomas@codesourcery.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Target s390x uses ad-hoc macro magic to guess if the compiler
supports the GCC extension __uint128_t.  This patch uses the
the dedicated macro CONFIG_INT128 defined by configure instead.

This fixes compilation with the CIL source code analyzer, which
uses GCC as a preprocessor but does not support __uint128_t.
Signed-off-by: NGabriel Kerneis <gabriel@kerneis.info>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Remove a stray colon from the end of a #ifdef line. Some versions
of gcc complain about this:
 linux-user/syscall.c: In function ‘do_syscall’:
 linux-user/syscall.c:7606:28: error: extra tokens at end of #ifdef directive [-Werror]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-By: NRiku Voipio <riku.voipio@linaro.org>
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

Configurable at CPU synthesis/instantiation.
Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Build DTC as QEMU is built. Fixes the issue with mingw build which can't
handles DTC's default CFLAGS.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

The submodule DTC should just build and use DTC as static (the whole
motivation for using submod is lack of widespread distro support).

The .so causes build failures on some platforms, so adjust the make
target to just build the static lib.
Signed-off-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

# By Amos Kong
# Via Luiz Capitulino
* luiz/queue/qmp:
  monitor: introduce query-command-line-options

Message-id: 1366922656-32545-1-git-send-email-lcapitulino@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

While reviewing some patches I found this problem where tcp_chr_accept
does not clear listen_tag when returning FALSE, leading to a double
g_source_remove of the underlying source. Not really a problem unless the id
gets re-used in between, but still something we should fix.

While at it I've also reviewed all the other code in qemu-char.c for
similar problems and found that pty_chr_timer has the same problem.

Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Message-id: 1366890782-10311-1-git-send-email-hdegoede@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

sys/param.h was included to define __FreeBSD_version, but the conditional
using it was removed by commit d05ef160
(Brad Smith, "Allow clock_gettime() monotonic clock to be utilized on more
OS's"), so the include is no longer needed here.
Signed-off-by: NEd Maste <emaste@freebsd.org>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1366906631-2680-1-git-send-email-emaste@freebsd.org
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

So users get a notification instead of a crash.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

We don't have multiple DisplayStates any more,
so passing it in as argument is not needed.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>