$ make print-CFLAGS
CFLAGS=-fsanitize=address -Og -g

Trick from various sources:
https://stackoverflow.com/questions/16467718/how-to-print-out-a-variable-in-makefile
https://www.cmcrossroads.com/article/printing-value-makefile-variableSigned-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Message-Id: <20180104160523.22995-4-marcandre.lureau@redhat.com>
Tested-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Move generic make flags in MAKEFLAGS (SUBDIR_MAKEFLAGS is more qemu specific).

Use --quiet to silence make 'is up to date' message.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Tested-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-Id: <20180104160523.22995-3-marcandre.lureau@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

These targets don't need a full build of git submodules.
(See b8e535ae and eaa2ddbb).
Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

For some systems (i.e. FreeBSD) the default 'make' is not compatible with the
GNU extensions used by QEMU makefiles.

Calling the GNU make (gmake) works, however the help displayed refers to the
host 'make' and copy/paste leads to lot of unobvious errors:

  $ gmake check-help
  [...]
   make check                Run all tests

  $ make check
  make: "Makefile" line 28: Missing dependency operator
  make: "Makefile" line 37: Need an operator
  make: "Makefile" line 41: warning: duplicate script for target "git-submodule-update" ignored
  make: "rules.mak" line 70: warning: duplicate script for target "%.o" ignored
  make: Unknown modifier ' '
  make: Unclosed substitution for eval modules (= missing)
  make: "tests/Makefile.include" line 24: Variable/Value missing from "export"
  make: "tests/" line 1: warning: Zero byte read from file, skipping rest of line.
  make: "tests/" line 1: Need an operator
  make: "Makefile" line 660: warning: duplicate script for target "ifneq" ignored
  make: "Makefile" line 78: warning: using previous script for "ifneq" defined here
  make: Fatal errors encountered -- cannot continue

Using the $(MAKE) variable, the help displayed is consistent with the 'make'
program used.
Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Use keycodedb to generate a qcode to linux mapping
Signed-off-by: NOwen Smith <owen.smith@citrix.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NStefano Stabellini <sstabellini@kernel.org>

Developers sometimes mistakenly run 'make test' instead of 'make check'.
'make test' triggers the ancient, unmaintained tcg unit tests in
tests/tcg/Makefile which have long since ceased compiling.

Even if someone fixes the TCG tests, it makes little sense to put
them in a 'make test' target, rather they should be 'make check-tcg',
possibly wired up as a dependency of 'make check'.

In the meantime, this patch disarms the 'make test' trap by simply
deleting it so users get an immediate error. This should be enough
for them to remember to type 'make check' instead (or 'make help'
to learn). It also deletes 'make speed' which is another route
into the tcg tests.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Reviewed-by: NKashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: NDaniel Henrique Barboza <danielhb@linux.vnet.ibm.com>
Message-id: 20171121142538.22072-1-berrange@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Using obscure black magic introduced in eaa2ddbb :)

In an out-of-tree directory, running "../configure && make help" will generate
some required files (.mak), then clone some submodules, compile at least
the capstone submodule, generate QMP and Trace files, and finally display
the help.

On an outdated computer (Sun Blade workstation), running "make help" took
more than 5h :) With this patch it took roughly 37min.
Suggested-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20171108032052.20029-1-f4bug@amsat.org>
Reviewed-by: NLaurent Vivier <lvivier@redhat.com>
Reviewed-by: NStefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When cross compiling QEMU for Windows we need to specify the cross
version of ranlib to avoid build errors when building capstone. This
patch ensures we use the same cross prefix on ranlib as other toolchain
components.

- Fedora23 mingw
- RHEL-7.2 with mingw packages from epel:

   LINK    qemu-img.exe
 build-win64/capstone/capstone.lib: error adding symbols: Archive has no
index; run ranlib to add one
 collect2: error: ld returned 1 exit status

$ x86_64-w64-mingw32-ar --version
GNU ar (GNU Binutils) 2.25
Tested-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>
Suggested-by: NPeter Maydell <peter.maydell@linaro.org>
Message-Id: <e457d4e906dceea4de6c3431813a06b137c1ab9c.1510103351.git.alistair.francis@xilinx.com>
Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

The Makefile attempts to optimize the handling of submodules by using MAKELEVEL
to only check the submodule status when running from the top level make
invokation. This causes problems for people who are using a makefile of their
own to in turn invoke QEMU's makefile, as MAKELEVEL is already set to 1 (or
more) when QEMU's makefile runs.

This optimization should not really be needed, since the git-submodule.sh
script is already used to detect if a submodule update is required. This by
removing the MAKELEVEL check, we at most add an extra 'git-submodule.sh status'
call to each make level, the overhead of which is lost in noise of building
QEMU.
Reviewed-by: NGreg Kurz <groug@kaod.org>
Tested-by: NGreg Kurz <groug@kaod.org>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Some people building QEMU use VPATH builds where the source directory is on a
read-only volume. In such a case 'scripts/git-submodules.sh update' will always
fail and users are required to run it manually themselves on their original
writable source directory.

While this is already supported, it is nice to give users a command line flag
to configure to permanently disable automatic submodule updates, as it means
they won't get hard to diagnose failures from git-submodules.sh at an arbitrary
later date.

This patch thus introduces a flag '--disable-git-update' which will prevent
'make' from ever running 'scripts/git-submodules.sh update'. It will still run
the 'status' command to determine if a submodule update is needed, but when it
does this it'll simply stop and print a message instructing the developer what
todo. eg

$ ./configure  --target-list=x86_64-softmmu --disable-git-update
...snip...

$ make
  GEN     config-host.h
  GEN     trace/generated-tcg-tracers.h
  GEN     trace/generated-helpers-wrappers.h
  GEN     trace/generated-helpers.h
  GEN     trace/generated-helpers.c
  GEN     module_block.h

GIT submodule checkout is out of date. Please run
  scripts/git-submodule.sh update ui/keycodemapdb
from the source directory checkout /home/berrange/src/virt/qemu

make: *** [Makefile:31: git-submodule-update] Error 1
Tested-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Some users can't run a bare 'git' command, due to need for a transparent
proxying solution such as 'tsocks'. This adds an argument to configure to
let users specify such a thing:

  ./configure --with-git="tsocks git"

The submodule script is also updated to give the user a hint about using this
flag, if we fail to checkout modules.
Tested-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>

Do not require the submodule, but use it if present.  Allow the
command-line to override system or git submodule either way.
Tested-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>

This was introduced by:
    commit aef45d51
    Author: Daniel P. Berrange <berrange@redhat.com>
    Date:   Fri Sep 29 11:11:56 2017 +0100

	build: automatically handle GIT submodule checkout for dtc

On my system, I see the following with a fresh clone:

% ./configure --disable-gtk --target-list=aarch64-softmmu
% make -j8
  GEN     aarch64-softmmu/config-devices.mak.tmp
  GEN     config-host.h
mkdir -p dtc/libfdt
  GIT     ui/keycodemapdb dtc
mkdir -p dtc/tests
  GEN     qemu-options.def
[snip]
  GEN     migration/trace.h
make: *** [git-submodule-update] Error 1
make: *** Waiting for unfinished jobs....

Upon closer inspection, the root cause of the error is:

% git submodule update --init ui/keycodemapdb dtc
fatal: destination path 'dtc' already exists and is not an empty directory.
Clone of 'git://git.qemu-project.org/dtc.git' into submodule path 'dtc' failed

This patch fixes this race condition by forcing the 'dtc/%' rule which caused
'dtc' to be non-empty to wait on '.git-submodule-status'.
Signed-off-by: NAaron Lindsay <alindsay@codeaurora.org>
Reviewed-by: NDaniel P. Berrange <berrange@redhat.com>
Acked-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1508352023-28591-1-git-send-email-alindsay@codeaurora.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add vertex shader which flips the texture upside down while blitting it.
Add argument to qemu_gl_run_texture_blit() to enable flipping.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 20171010135453.6704-4-kraxel@redhat.com

With the upcoming dmabuf support in qemu there will be more users of the
shaders than just console-gl.c.  So rename ConsoleGLState to
QemuGLShader, rename some functions too, move code from console-gl.c to
shaders.c.

No functional change.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 20171010135453.6704-3-kraxel@redhat.com

qemu-keymap generates qemu reverse keymaps from xkb keymaps,
which can be used with the qemu "-k" command line switch.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 20171005153330.19210-2-kraxel@redhat.com

Replace the number_to_qcode, qcode_to_number and linux_to_qcode
tables with automatically generated tables.

Missing entries in linux_to_qcode now fixed:

  KEY_LINEFEED -> Q_KEY_CODE_LF
  KEY_KPEQUAL -> Q_KEY_CODE_KP_EQUALS
  KEY_COMPOSE -> Q_KEY_CODE_COMPOSE
  KEY_AGAIN -> Q_KEY_CODE_AGAIN
  KEY_PROPS -> Q_KEY_CODE_PROPS
  KEY_UNDO -> Q_KEY_CODE_UNDO
  KEY_FRONT -> Q_KEY_CODE_FRONT
  KEY_COPY -> Q_KEY_CODE_COPY
  KEY_OPEN -> Q_KEY_CODE_OPEN
  KEY_PASTE -> Q_KEY_CODE_PASTE
  KEY_CUT -> Q_KEY_CODE_CUT
  KEY_HELP -> Q_KEY_CODE_HELP
  KEY_MEDIA -> Q_KEY_CODE_MEDIASELECT

In addition, some fixes:

 - KEY_PLAYPAUSE now maps to Q_KEY_CODE_AUDIOPLAY, instead of
   KEY_PLAYCD. KEY_PLAYPAUSE is defined across almost all scancodes
   sets, while KEY_PLAYCD only appears in AT set1, so the former is
   a more useful mapping.

Missing entries in qcode_to_number now fixed:

  Q_KEY_CODE_AGAIN -> 0x85
  Q_KEY_CODE_PROPS -> 0x86
  Q_KEY_CODE_UNDO -> 0x87
  Q_KEY_CODE_FRONT -> 0x8c
  Q_KEY_CODE_COPY -> 0xf8
  Q_KEY_CODE_OPEN -> 0x64
  Q_KEY_CODE_PASTE -> 0x65
  Q_KEY_CODE_CUT -> 0xbc
  Q_KEY_CODE_LF -> 0x5b
  Q_KEY_CODE_HELP -> 0xf5
  Q_KEY_CODE_COMPOSE -> 0xdd
  Q_KEY_CODE_KP_EQUALS -> 0x59
  Q_KEY_CODE_MEDIASELECT -> 0xed

In addition, some fixes:

 - Q_KEY_CODE_MENU was incorrectly mapped to the compose
   scancode (0xdd) and is now mapped to 0x9e
 - Q_KEY_CODE_FIND was mapped to 0xe065 (Search) instead
   of to 0xe041 (Find)
 - Q_KEY_CODE_HIRAGANA was mapped to 0x70 (Katakanahiragana)
   instead of of 0x77 (Hirigana)
 - Q_KEY_CODE_PRINT was mapped to 0xb7 which is not a defined
   scan code in AT set 1, it is now mapped to 0x54 (sysrq)
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Message-id: 20170929101201.21039-5-berrange@redhat.com
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

The https://gitlab.com/keycodemap/keycodemapdb/ repo contains a
data file mapping between all the different scancode/keycode/keysym
sets that are known, and a tool to auto-generate lookup tables for
different combinations.

It is used by GTK-VNC, SPICE-GTK and libvirt for mapping keys.
Using it in QEMU will let us replace many hand written lookup
tables with auto-generated tables from a master data source,
reducing bugs. Adding new QKeyCodes will now only require the
master table to be updated, all ~20 other tables will be
automatically updated to follow.
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Message-id: 20170929101201.21039-4-berrange@redhat.com

[ kraxel: fix build ]
[ kraxel: switch repo to qemu.git mirror ]
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Currently if DTC is required by configure and not available in the host
OS install, we exit with an error message telling the user to checkout a
git submodule or install the library.

This introduces automatic handling of the git submodule checkout process
and enables it for dtc. This only runs if building from GIT, so users of
release tarballs still need the system library install. The current state
of the git checkout is stashed in .git-submodule-status, and a helper
program is used to determine if this state matches the desired submodule
state. A dependency against 'Makefile' ensures that the submodule state
is refreshed at the start of the build process
Signed-off-by: NDaniel P. Berrange <berrange@redhat.com>
Message-id: 20170929101201.21039-2-berrange@redhat.com

[ kraxel: use /bin/sh not bash for scripts/git-submodule.sh ]
[ kraxel: fix Makefile dependencies ]
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

[fixup] Makefile dep

Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>

And actually link to it from vhost-user-bridge.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>

Block driver documentation is available in qemu-doc.html.  It would be
convenient to have documentation for formats, protocols, and filter
drivers in a man page.

Extract the relevant part of qemu-doc.html into a new file called
docs/qemu-block-drivers.texi.  This file can also be built as a
stand-alone document (man, html, etc).
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Proper support of persistent reservation for multipath devices requires
communication with the multipath daemon, so that the reservation is
registered and applied when a path comes up.  The device mapper
utilities provide a library to do so; this patch makes qemu-pr-helper.c
detect multipath devices and, when one is found, delegate the operation
to libmpathpersist.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Introduce a privileged helper to run persistent reservation commands.
This lets virtual machines send persistent reservations without using
CAP_SYS_RAWIO or out-of-tree patches.  The helper uses Unix permissions
and SCM_RIGHTS to restrict access to processes that can access its socket
and prove that they have an open file descriptor for a raw SCSI device.

The next patch will also correct the usage of persistent reservations
with multipath devices.

It would also be possible to support for Linux's IOC_PR_* ioctls in
the future, to support NVMe devices.  For now, however, only SCSI is
supported.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Reviewed-by: NAlex Bennée <alex.bennee@linaro.org>
Tested-by: NAlex Bennée <alex.bennee@linaro.org>
Signed-off-by: NFam Zheng <famz@redhat.com>

Using two libraries (libqemuutil.a and libqemustub.a) would sometimes
result in circular dependencies. To avoid these issues let's just
combine both into a single library that functions as both.
Signed-off-by: NAlistair Francis <alistair.francis@xilinx.com>
Message-Id: <54e6458745493d10901964624479a7d9a872f481.1503077821.git.alistair.francis@xilinx.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Drop pixman submodule and support for the "internal" pixman build.
pixman should be reasonably well established meanwhile so we don't
need the fallback submodule any more.  While being at it also drop
some #ifdefs for pixman versions older than what we require in
configure anyway.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Message-id: 20170905140116.28181-2-kraxel@redhat.com

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-Id: <1503602048-12268-14-git-send-email-armbru@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>

Sadly, we don't have a TPM maintainer, not even a MAINTAINERS entry.
Create one, and mark it orphaned.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-Id: <1503602048-12268-12-git-send-email-armbru@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-Id: <1503602048-12268-11-git-send-email-armbru@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>

Cc: Juan Quintela <quintela@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-Id: <1503602048-12268-10-git-send-email-armbru@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>

UI stuff is remote desktop stuff (Spice, VNC) and input stuff (mouse,
keyboard).

Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-Id: <1503602048-12268-9-git-send-email-armbru@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NGerd Hoffmann <kraxel@redhat.com>

Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-Id: <1503602048-12268-8-git-send-email-armbru@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-Id: <1503602048-12268-7-git-send-email-armbru@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>

Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-Id: <1503602048-12268-6-git-send-email-armbru@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>

Cc: "Daniel P. Berrange" <berrange@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-Id: <1503602048-12268-5-git-send-email-armbru@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>

Currently if you do "make check-help" in a fresh checkout, only an error
is printed which is not nice:

    $ make check-help V=1
    cc -nostdlib  -o check-help.mo
    cc: fatal error: no input files
    compilation terminated.
    rules.mak:115: recipe for target 'check-help.mo' failed
    make: *** [check-help.mo] Error 1

Move the config-host.mak condition into the body of
tests/Makefile.include and always include the rule for check-help.
Reported-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NFam Zheng <famz@redhat.com>
Message-Id: <20170810085025.14076-1-famz@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: NFam Zheng <famz@redhat.com>

It got moved in qga/main.c from commit 2870dc34.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NMichael Tokarev <mjt@tls.msk.ru>

Don't try to build the ivshmem-server and ivshmem-client tools unless
CONFIG_IVSHMEM is set.

This fixes in passing a build bug on NetBSD, which fails to build the
ivshmem tools because they use shm_open() and on NetBSD that requires
linking against -lrt.
Signed-off-by: NKamil Rytarowski <n54@gmx.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1500021225-4118-4-git-send-email-peter.maydell@linaro.org
[PMM: moved some code into earlier patches; minor bugfixes;
 added commit message]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

It's already possible to do a network boot of an s390x guest with an
external netboot image based on a Linux installation, but it would
be much more convenient if the s390-ccw firmware supported network
booting right out of the box, without the need to assemble such an
external image first.

This is an s390-netboot.img that can be used for network booting.
You can download a combined kernel + initrd image via TFTP
by starting QEMU for example with:

 qemu-system-s390x ... -device virtio-net,netdev=n1,bootindex=1 \
       -netdev user,id=n1,tftp=/path/to/tftp,bootfile=kernel.img

Note that this version does not support downloading via config
files (i.e. pxelinux config files or .INS config files) yet. This
will be added later.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>