There are 5 bits of state that could be added, but to save
space within tbflags, add only a single enable bit.
Helpers will determine the rest of the state at runtime.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-4-richard.henderson@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Post v8.4 bits taken from SysReg_v85_xml-00bet8.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-3-richard.henderson@linaro.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Add storage space for the 5 encryption keys.
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NRichard Henderson <richard.henderson@linaro.org>
Message-id: 20190108223129.5570-2-richard.henderson@linaro.org
[PMM: use 0xf rather than -1 in FIELD_DP64() expressions to
 avoid clang warnings about implicit truncation from int to
 bitfield changing the value]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The PHY behind the MAC of an Aspeed SoC can be controlled using two
different MDC/MDIO interfaces. The same registers PHYCR (MAC60) and
PHYDATA (MAC64) are involved but they have a different layout.

BIT31 of the Feature Register (MAC40) controls which MDC/MDIO
interface is active.
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Reviewed-by: NAndrew Jeffery <andrew@aj.id.au>
Reviewed-by: NJoel Stanley <joel@jms.id.au>
Message-id: 20190111125759.31577-1-clg@kaod.org
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

In U-boot, we switch from S-SVC -> Mon -> Hyp mode when we want to
enter Hyp mode. The change into Hyp mode is done by doing an
exception return from Mon. This doesn't work with current QEMU.

The problem is that in bad_mode_switch() we refuse to allow
the change of mode.

Note that bad_mode_switch() is used to do validation for two situations:

 (1) changes to mode by instructions writing to CPSR.M
     (ie not exception take/return) -- this corresponds to the
     Armv8 Arm ARM pseudocode Arch32.WriteModeByInstr
 (2) changes to mode by exception return

Attempting to enter or leave Hyp mode via case (1) is forbidden in
v8 and UNPREDICTABLE in v7, and QEMU is correct to disallow it
there. However, we're already doing that check at the top of the
bad_mode_switch() function, so if that passes then we should allow
the case (2) exception return mode changes to switch into Hyp mode.

We want to test whether we're trying to return to the nonexistent
"secure Hyp" mode, so we need to look at arm_is_secure_below_el3()
rather than arm_is_secure(), since the latter is always true if
we're in Mon (EL3).
Signed-off-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 20190109152430.32359-1-agraf@suse.de
[PMM: rewrote commit message]
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Let's report IO-coherent access is supported for translation
table walks, descriptor fetches and queues by setting the COHACC
override flag. Without that, we observe wrong command opcodes.
The DT description also advertises the dma coherency.

Fixes a703b4f6 ("hw/arm/virt-acpi-build: Add smmuv3 node in IORT table")
Signed-off-by: NEric Auger <eric.auger@redhat.com>
Reported-by: NShameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com>
Tested-by: NShameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Reviewed-by: NAndrew Jones <drjones@redhat.com>
Message-id: 20190107101041.765-1-eric.auger@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

When the device is disabled, the internal circuitry keeps the data
register loaded and doesn't update it.
Signed-off-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: NAlistair Francis <alistair.francis@wdc.com>
Message-id: 20190104182057.8778-1-philmd@redhat.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

s390x updates:
- clang compilation fixes
- fixes in zpci hotplug code
- handle unimplemented diag 308 subcodes correctly
- add common fmb in zpci

# gpg: Signature made Fri 18 Jan 2019 12:13:26 GMT
# gpg:                using RSA key DECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>"
# gpg:                 aka "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg:                 aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# gpg:                 aka "Cornelia Huck <cohuck@kernel.org>"
# gpg:                 aka "Cornelia Huck <cohuck@redhat.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0  18CE DECF 6B93 C6F0 2FAF

* remotes/cohuck/tags/s390x-20190118:
  s390x/pci: add common function measurement block
  s390x/pci: Ignore the unplug call if we already have a release_timer
  s390x/pci: Always delete and free the release_timer
  s390x/pci: Move some hotplug checks to the pre_plug handler
  s390x/pci: Use hotplug_dev instead of looking up the host bridge
  s390x/pci: Set the iommu region size mpcifc request
  s390x/pci: Send correct event on hotplug
  configure: Only build the s390-ccw bios if the compiler supports -march=z900
  s390x: Return specification exception for unimplemented diag 308 subcodes
  pc-bios/s390-ccw: Use proper register names for Clang
  s390: avoid potential null dereference in s390_pcihost_unplug()
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Python queue, 2019-01-17

Fixes:
* Actually test different Python versions on Travis CI
* Fix qemu.py error message when qemu dies from signal

Cleanups:
* Track Python version on config-host.mak
* Remove fixed crashes from scripts/device-crash-test
* Acceptance tests: Linux initrd checking test
* Fix utf-8 mangling at scripts/replay-dump.py
* Remove unused python imports from multiple scripts

# gpg: Signature made Thu 17 Jan 2019 20:16:41 GMT
# gpg:                using RSA key 2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/python-next-pull-request:
  scripts/replay-dump.py: fix utf-8 mangling
  qemu.py: Fix error message when qemu dies from signal
  Acceptance tests: add Linux initrd checking test
  check-help: visual and content improvements
  Travis CI: make specified Python versions usable on jobs
  check-venv: use recorded Python version
  configure: keep track of Python version
  scripts: Remove unused python imports
  scripts/device-crash-test: Remove known crashes
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

pci, pc, virtio: fixes, features

tpm physical presence interface
rsc support in virtio net
ivshmem is removed
misc cleanups and fixes all over the place
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Fri 18 Jan 2019 02:11:11 GMT
# gpg:                using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* remotes/mst/tags/for_upstream: (49 commits)
  migration: Use strnlen() for fixed-size string
  migration: Fix stringop-truncation warning
  hw/acpi: Use QEMU_NONSTRING for non NUL-terminated arrays
  block/sheepdog: Use QEMU_NONSTRING for non NUL-terminated arrays
  qemu/compiler: Define QEMU_NONSTRING
  acpi: update expected files
  hw: acpi: Fix memory hotplug AML generation error
  tpm: clear RAM when "memory overwrite" requested
  acpi: add ACPI memory clear interface
  acpi: build TPM Physical Presence interface
  acpi: expose TPM/PPI configuration parameters to firmware via fw_cfg
  tpm: allocate/map buffer for TPM Physical Presence interface
  tpm: add a "ppi" boolean property
  hw/misc/edu: add msi_uninit() for pci_edu_uninit()
  virtio: Make disable-legacy/disable-modern compat properties optional
  globals: Allow global properties to be optional
  virtio: virtio 9p really requires CONFIG_VIRTFS to work
  virtio: split virtio crypto bits from virtio-pci.h
  virtio: split virtio gpu bits from virtio-pci.h
  virtio: split virtio serial bits from virtio-pci
  ...
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Common function measurement block is used to report zPCI internal
counters of successful pcilg/stg/stb and rpcit instructions to
a memory location provided by the program.

This patch introduces a new ZpciFmb structure and schedules a timer
callback to copy the zPCI measures to the FMB in the guest memory
at an interval time set to 4s.

An error while attemping to update the FMB, would generate an error
event to the guest.

The pcilg/stg/stb and rpcit interception handlers increase the
related counter on a successful call.
The guest shall pass a null FMBA (FMB address) in the FIB (Function
Information Block) when it issues a Modify PCI Function Control
instruction to switch off FMB and stop the corresponding timer.
Signed-off-by: NYi Min Zhao <zyimin@linux.ibm.com>
Signed-off-by: NPierre Morel <pmorel@linux.ibm.com>
Message-Id: <1546969050-8884-2-git-send-email-pmorel@linux.ibm.com>
Acked-by: NDavid Hildenbrand <david@redhat.com>
Reviewed-by: NCollin Walling <walling@linux.ibm.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

... otherwise two successive calls to qdev_unplug() (e.g. by an impatient
user) will effectively overwrite pbdev->release_timer, resulting in a
memory leak. We are already processing the unplug.

If there is already a release_timer, the unplug will be performed after
the timeout.

Can be easily triggered by
(hmp) device_add virtio-mouse-pci,id=test
(hmp) stop
(hmp) device_del test
(hmp) device_del test
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20190114103110.10909-5-david@redhat.com>
Reviewed-by: NCollin Walling <walling@linux.ibm.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

We should always get rid of it. I don't see a reason to keep the timer
alive if the devices are going away. This looks like a memory leak.

(hmp) device_add virtio-mouse-pci,id=test
(hmp) device_del test
-> guest notified, timer pending.
-> guest does not react for some reason (e.g. crash)
-> s390_pcihost_timer_cb(). Timer not pending anymore. qmp_unplug().

-> Device deleted. Timer expired (not pending) but not freed.
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20190114103110.10909-4-david@redhat.com>
Reviewed-by: NCollin Walling <walling@linux.ibm.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

Let's move most of the checks to the new pre_plug handler. As a PCI
bridge is just a PCI device, we can simplify the code.

Notes: We cannot yet move the MSIX check or device ID creation +
zPCI device creation to the pre_plug handler as both parts are not
fixed before actual device realization (and therefore after pre_plug and
before plug). Once that part is factored out, we can move these parts to
the pre_plug handler, too and therefore remove all possible errors from
the plug handler.
Reviewed-by: NCollin Walling <walling@linux.ibm.com>
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20190114103110.10909-3-david@redhat.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

We directly have it in our hands.
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20190114103110.10909-2-david@redhat.com>
Reviewed-by: NCollin Walling <walling@linux.ibm.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

The size of the accessible iommu memory region in the guest
is given to the IOMMU by the guest through the mpcifc request
specifying the PCI Base Address and the PCI Address Limit.

Let's set the size of the IOMMU region to:
    (PCI Address Limit) - (PCI Base Address) + 1.

Fixes: f7c40aa1 ("s390x/pci: fix failures of dma map/unmap")
Signed-off-by: NPierre Morel <pmorel@linux.ibm.com>
Message-Id: <1547125207-16907-2-git-send-email-pmorel@linux.ibm.com>
Acked-by: NCollin Walling <walling@linux.ibm.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

Comit 2c28c490 ("s390x/pci: let pci devices start in configured mode")
changed the initial state of zPCI devices from ZPCI_FS_STANDBY to
ZPCI_FS_DISABLED (a.k.a. configured). However we still only send a
HP_EVENT_RESERVED_TO_STANDBY event to the guest, indicating a wrong
state.

Let's send a HP_EVENT_TO_CONFIGURED event instead, to match the actual
state the device is in.

This fixes hotplugged devices having to be enabled explicitly in the
guest e.g. via echo 1 > /sys/bus/pci/slots/00000000/power.

On real HW, a PCI device always pops up in the STANDBY state. In QEMU,
we decided to let it show up directly in the configured state (as
configuring it is otherwise just an extra burden for the admin). We can
safely bypass the STANDBY state when hotplugging PCI devices to a guest.

Fixes: 2c28c490 ("s390x/pci: let pci devices start in configured mode")
Reported-by: NCornelia Huck <cohuck@redhat.com>
Signed-off-by: NDavid Hildenbrand <david@redhat.com>
Message-Id: <20190110210358.24035-1-david@redhat.com>
Tested-by: NCornelia Huck <cohuck@redhat.com>
Reviewed-by: NPierre Morel <pmorel@linux.ibm.com>
Reviewed-by: NCollin Walling <walling@linux.ibm.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

We want to build our s390-ccw bios with -march=z900 so that it also
works with the oldest s390x CPU that we support with TCG. However,
Clang on s390x does not support -march=z900 anymore, so we can not
use this compiler to build the s390-ccw bios. Thus add a proper test
to the configure script to see whether the compiler is usable.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Message-Id: <1547470346-18416-1-git-send-email-thuth@redhat.com>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

The architecture specifies specification exceptions for all
unavailable subcodes.

The presence of subcodes is indicated by checking some query subcode.
For example 6 will indicate that 3-6 are available. So future systems
might call new subcodes to check for new features. This should not
trigger a hw error, instead we return the architectured specification
exception.
Signed-off-by: NJanosch Frank <frankja@linux.ibm.com>
Cc: qemu-stable@nongnu.org
Message-Id: <20190111113657.66195-3-frankja@linux.ibm.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

When compiling the s390-ccw firmware with Clang 7.0.1, I get the
following errors:

pc-bios/s390-ccw/start.S:62:19: error: invalid use of length addressing
        stctg 0,0,0(15)
                  ^
pc-bios/s390-ccw/start.S:63:12: error: invalid use of length addressing
        oi 6(15), 0x2
           ^
pc-bios/s390-ccw/start.S:64:19: error: invalid use of length addressing
        lctlg 0,0,0(15)
                  ^
pc-bios/s390-ccw/start.S:76:19: error: invalid use of length addressing
        stctg 0,0,0(15)
                  ^
pc-bios/s390-ccw/start.S:77:12: error: invalid use of length addressing
        ni 6(15), 0xfd
           ^
pc-bios/s390-ccw/start.S:78:19: error: invalid use of length addressing
        lctlg 0,0,0(15)
                  ^
pc-bios/s390-ccw/start.S:79:12: error: invalid operand for instruction
        br 14
           ^

Let's use proper register names like in the rest of this file to fix it.
Signed-off-by: NThomas Huth <thuth@redhat.com>
Message-Id: <1547123559-30476-1-git-send-email-thuth@redhat.com>
Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

When getting the 'pbdev', the if...else has no default branch.
From Coverity, the 'pbdev' maybe null when the 'dev' is not
the TYPE_PCI_BRIDGE/TYPE_PCI_DEVICE/TYPE_S390_PCI_DEVICE.
This patch adds a default branch for device plug and unplug.

Spotted by Coverity: CID 1398593
Signed-off-by: NLi Qiang <liq3ea@163.com>
Message-Id: <20190108151114.33140-1-liq3ea@163.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Reviewed-by: NHalil Pasic <pasic@linux.ibm.com>
Reviewed-by: NCollin Walling <walling@linux.ibm.com>
Signed-off-by: NCornelia Huck <cohuck@redhat.com>

GCC 8 introduced the -Wstringop-overflow, which detect buffer overflow
by string-modifying functions declared in <string.h>, such strncpy(),
used in global_state_store_running().

GCC indeed found an incorrect use of strlen(), because this array
is loaded by VMSTATE_BUFFER(runstate, GlobalState) then parsed
using qapi_enum_parse which does not get the buffer length.

Use strnlen() which returns sizeof(s->runstate) if the array is not
NUL-terminated, assert the size is within range, and enforce the array
to be NUL-terminated to avoid an overflow in qapi_enum_parse().

This fixes:

    CC      migration/global_state.o
  qemu/migration/global_state.c: In function 'global_state_pre_save':
  qemu/migration/global_state.c:109:15: error: 'strlen' argument 1 declared attribute 'nonstring' [-Werror=stringop-overflow=]
       s->size = strlen((char *)s->runstate) + 1;
                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~
  qemu/migration/global_state.c:24:13: note: argument 'runstate' declared here
       uint8_t runstate[100] QEMU_NONSTRING;
               ^~~~~~~~
  cc1: all warnings being treated as errors
  make: *** [qemu/rules.mak:69: migration/global_state.o] Error 1
Suggested-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

GCC 8 added a -Wstringop-truncation warning:

  The -Wstringop-truncation warning added in GCC 8.0 via r254630 for
  bug 81117 is specifically intended to highlight likely unintended
  uses of the strncpy function that truncate the terminating NUL
  character from the source string.

This new warning leads to compilation failures:

    CC      migration/global_state.o
  qemu/migration/global_state.c: In function 'global_state_store_running':
  qemu/migration/global_state.c:45:5: error: 'strncpy' specified bound 100 equals destination size [-Werror=stringop-truncation]
       strncpy((char *)global_state.runstate, state, sizeof(global_state.runstate));
       ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  make: *** [qemu/rules.mak:69: migration/global_state.o] Error 1

Adding an assert is enough to silence GCC.

(alternatively, we could hard-code "running")
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
[PMD: More verbose commit message]
Signed-off-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

GCC 8 added a -Wstringop-truncation warning:

  The -Wstringop-truncation warning added in GCC 8.0 via r254630 for
  bug 81117 is specifically intended to highlight likely unintended
  uses of the strncpy function that truncate the terminating NUL
  character from the source string.

This new warning leads to compilation failures:

    CC      hw/acpi/core.o
  In function 'acpi_table_install', inlined from 'acpi_table_add' at qemu/hw/acpi/core.c:296:5:
  qemu/hw/acpi/core.c:184:9: error: 'strncpy' specified bound 4 equals destination size [-Werror=stringop-truncation]
           strncpy(ext_hdr->sig, hdrs->sig, sizeof ext_hdr->sig);
           ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  make: *** [qemu/rules.mak:69: hw/acpi/core.o] Error 1

Use the QEMU_NONSTRING attribute, since ACPI tables don't require the
strings to be NUL-terminated.
Suggested-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Signed-off-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>

GCC 8 added a -Wstringop-truncation warning:

  The -Wstringop-truncation warning added in GCC 8.0 via r254630 for
  bug 81117 is specifically intended to highlight likely unintended
  uses of the strncpy function that truncate the terminating NUL
  character from the source string.

This new warning leads to compilation failures:

    CC      block/sheepdog.o
  qemu/block/sheepdog.c: In function 'find_vdi_name':
  qemu/block/sheepdog.c:1239:5: error: 'strncpy' specified bound 256 equals destination size [-Werror=stringop-truncation]
       strncpy(buf + SD_MAX_VDI_LEN, tag, SD_MAX_VDI_TAG_LEN);
       ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  make: *** [qemu/rules.mak:69: block/sheepdog.o] Error 1

As described previous to the strncpy() calls, the use of strncpy() is
correct here:

    /* This pair of strncpy calls ensures that the buffer is zero-filled,
     * which is desirable since we'll soon be sending those bytes, and
     * don't want the send_req to read uninitialized data.
     */
    strncpy(buf, filename, SD_MAX_VDI_LEN);
    strncpy(buf + SD_MAX_VDI_LEN, tag, SD_MAX_VDI_TAG_LEN);

Use the QEMU_NONSTRING attribute, since this array is intended to store
character arrays that do not necessarily contain a terminating NUL.
Suggested-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>

GCC 8 introduced the -Wstringop-truncation checker to detect truncation by
the strncat and strncpy functions (closely related to -Wstringop-overflow,
which detect buffer overflow by string-modifying functions declared in
<string.h>).

In tandem of -Wstringop-truncation, the "nonstring" attribute was added:

  The nonstring variable attribute specifies that an object or member
  declaration with type array of char, signed char, or unsigned char,
  or pointer to such a type is intended to store character arrays that
  do not necessarily contain a terminating NUL. This is useful in detecting
  uses of such arrays or pointers with functions that expect NUL-terminated
  strings, and to avoid warnings when such an array or pointer is used as
  an argument to a bounded string manipulation function such as strncpy.

  From the GCC manual: https://gcc.gnu.org/onlinedocs/gcc/Common-Variable-Attributes.html#index-nonstring-variable-attribute

Add the QEMU_NONSTRING macro which checks if the compiler supports this
attribute.
Suggested-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NRichard Henderson <richard.henderson@linaro.org>
Reviewed-by: NThomas Huth <thuth@redhat.com>
Signed-off-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>

Update expected files affected by:
hw: acpi: Fix memory hotplug AML generation error
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

When using the generated memory hotplug AML, the iasl
compiler would give the following error:

dsdt.dsl 266: Return (MOST (_UID, Arg0, Arg1, Arg2))
Error 6080 - Called method returns no value ^
Signed-off-by: NYang Zhong <yang.zhong@intel.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Note: the "Platform Reset Attack Mitigation" specification isn't
explicit about NVDIMM, since they could have different usages. It uses
the term "system memory" generally (and also "volatile memory RAM" in
its introduction). For initial support, I propose to consider
non-volatile memory as not being subject to the memory clear. There is
an on-going discussion in the TCG "pcclientwg" working group for
future revisions.

CPU cache clearing is done unconditionally in edk2 since commit
d20ae95a13e851 (edk2-stable201811).
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Tested-by: NStefan Berger <stefanb@linux.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

The interface is described in the "TCG Platform Reset Attack
Mitigation Specification", chapter 6 "ACPI _DSM Function". According
to Laszlo, it's not so easy to implement in OVMF, he suggested to do
it in qemu instead.

See specification documentation for more details, and next commit for
memory clear on reset handling.

The underlying TCG specification is accessible from the following
page.

https://trustedcomputinggroup.org/resource/pc-client-work-group-platform-reset-attack-mitigation-specification-version-1-0/

This patch implements version 1.0.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Tested-by: NStefan Berger <stefanb@linux.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

The TPM Physical Presence interface consists of an ACPI part, a shared
memory part, and code in the firmware. Users can send messages to the
firmware by writing a code into the shared memory through invoking the
ACPI code. When a reboot happens, the firmware looks for the code and
acts on it by sending sequences of commands to the TPM.

This patch adds the ACPI code. It is similar to the one in EDK2 but doesn't
assume that SMIs are necessary to use. It uses a similar datastructure for
the shared memory as EDK2 does so that EDK2 and SeaBIOS could both make use
of it. I extended the shared memory data structure with an array of 256
bytes, one for each code that could be implemented. The array contains
flags describing the individual codes. This decouples the ACPI implementation
from the firmware implementation.

The underlying TCG specification is accessible from the following page.

https://trustedcomputinggroup.org/tcg-physical-presence-interface-specification/

This patch implements version 1.30.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
[ Marc-André - ACPI code improvements and windows fixes ]
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Tested-by: NStefan Berger <stefanb@linux.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

To avoid having to hard code the base address of the PPI virtual
memory device we introduce a fw_cfg file etc/tpm/config that holds the
base address of the PPI device, the version of the PPI interface and
the version of the attached TPM.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
[ Marc-André: renamed to etc/tpm/config, made it static, document it ]
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Tested-by: NStefan Berger <stefanb@linux.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Implement a virtual memory device for the TPM Physical Presence interface.
The memory is located at 0xFED45000 and used by ACPI to send messages to the
firmware (BIOS) and by the firmware to provide parameters for each one of
the supported codes.

This interface should be used by all TPM devices on x86 and can be
added by calling tpm_ppi_init_io().

Note: bios_linker cannot be used to allocate the PPI memory region,
since the reserved memory should stay stable across reboots, and might
be needed before the ACPI tables are installed.
Signed-off-by: NStefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Tested-by: NStefan Berger <stefanb@linux.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

The following patches implement the TPM Physical Presence Interface,
make use of a new memory region and a fw_cfg entry. Enable PPI by
default with >=4.0 machine type, to avoid migration issues.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Tested-by: NStefan Berger <stefanb@linux.ibm.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Let's supplement the msi_uninit() when failing to realize
the pci edu device.
Reported-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NFei Li <shirley17fei@gmail.com>
Reviewed-by: NMarcel Apfelbaum <marcel.apfelbaum@gmail.com>
Reviewed-by: NPhilippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: NPeter Xu <peterx@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

The disable-legacy and disable-modern properties apply only to
some virtio-pci devices.  Make those properties optional.

This fixes the crash introduced by commit f6e501a2 ("virtio: Provide
version-specific variants of virtio PCI devices"):

  $ qemu-system-x86_64 -machine pc-i440fx-2.6 \
    -device virtio-net-pci-non-transitional
  Unexpected error in object_property_find() at qom/object.c:1092:
  qemu-system-x86_64: -device virtio-net-pci-non-transitional: can't apply \
  global virtio-pci.disable-modern=on: Property '.disable-modern' not found
  Aborted (core dumped)
Reported-by: NThomas Huth <thuth@redhat.com>
Fixes: f6e501a2 ("virtio: Provide version-specific variants of virtio PCI devices")
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Making some global properties optional will let us simplify
compat code when a given property works on most (but not all)
subclasses of a given type.

Device types will be able to opt out from optional compat
properties by simply not registering those properties.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Reviewed-by: NCornelia Huck <cohuck@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NGreg Kurz <groug@kaod.org>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Reviewed-by: NLaurent Vivier <lvivier@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

Reviewed-by: NLaurent Vivier <lvivier@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>