- 07 3月, 2011 40 次提交
-
-
由 Michael Walle 提交于
Add me as the lm32-target and machines maintainer. Signed-off-by: NMichael Walle <michael@walle.cc> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
-
由 Michael Walle 提交于
Signed-off-by: NMichael Walle <michael@walle.cc> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
-
由 Michael Walle 提交于
This patch creates tests/lm32 directory and adds tests for every LatticeMico32 opcode. Signed-off-by: NMichael Walle <michael@walle.cc> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
-
由 Michael Walle 提交于
This patch adds general target documentation and a todo list. Signed-off-by: NMichael Walle <michael@walle.cc> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
-
由 Michael Walle 提交于
This patch adds support for the following two BSPs: - LM32 EVR32 BSP (as used by RTEMS) - uclinux BSP by Theobroma Systems Signed-off-by: NMichael Walle <michael@walle.cc> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
-
由 Michael Walle 提交于
This patch adds helper functions to create a ROM, which contains a hardware description of a board. This is used in Theobromas LM32 Linux port. Signed-off-by: NMichael Walle <michael@walle.cc> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
-
由 Michael Walle 提交于
This patch add support for a system control block. It is supposed to act as helper for the emulated program. E.g. shutting down the VM or printing test results. This model is intended for testing purposes only and doesn't fit to any real hardware. Therefore, it is not added to any board by default. Instead a user has to add it explicitly with the '-device' commandline parameter. Signed-off-by: NMichael Walle <michael@walle.cc> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
-
由 Michael Walle 提交于
This patch add support for the LatticeMico32 UART. Signed-off-by: NMichael Walle <michael@walle.cc> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
-
由 Michael Walle 提交于
This patch adds support for the LatticeMico32 system timer. Signed-off-by: NMichael Walle <michael@walle.cc> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
-
由 Michael Walle 提交于
This patch adds init functions for the PIC and JTAG UART commonly used in the board initialization. Signed-off-by: NMichael Walle <michael@walle.cc> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
-
由 Michael Walle 提交于
This patch adds the JTAG UART model. It is accessed through special control registers and opcodes. Therefore the translation uses callbacks to this model. Signed-off-by: NMichael Walle <michael@walle.cc> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
-
由 Michael Walle 提交于
This patch adds the interrupt controller of the lm32. Because the PIC is accessed through special control registers and opcodes, there are callbacks from the lm32 translation code to this model. Signed-off-by: NMichael Walle <michael@walle.cc> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
-
由 Michael Walle 提交于
This patch adds lm32 support to the gdbstub. Signed-off-by: NMichael Walle <michael@walle.cc> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
-
由 Michael Walle 提交于
This patch adds support for saving and loading the processor state. Signed-off-by: NMichael Walle <michael@walle.cc> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
-
由 Michael Walle 提交于
This patch adds translation helper functions. Signed-off-by: NMichael Walle <michael@walle.cc> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
-
由 Michael Walle 提交于
This patch adds the main translation routine. All opcodes of the LatticeMico32 processor are supported and translated to TCG ops. Signed-off-by: NMichael Walle <michael@walle.cc> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
-
由 Michael Walle 提交于
This patch adds support for the LatticeMico32 softcore processor by Lattice Semiconductor. Signed-off-by: NMichael Walle <michael@walle.cc> Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>
-
由 Peter Maydell 提交于
Newer ARM kernels try to probe for whether the CPU has hardware breakpoint support. For this to work QEMU has to implement a minimal set of the cp14 debug registers. The architecture requires v7 cores to implement debug and so there is no defined way to report its absence; however in practice returning a zero DBGDIDR (ie with a reserved value for "debug architecture version") should cause well-written hw debug users to do the right thing. We also implement DBGDRAR and DBGDSAR as RAZ, indicating no memory mapped debug components. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Peter Maydell 提交于
Use the new TCG temporary leak debugging facilities to check that each ARM instruction does not leak temporaries. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Peter Maydell 提交于
This commit removes the ad-hoc resource leak checking code from target-arm. This includes replacing all uses of new_tmp() with tcg_temp_new_i32() and all uses of dead_tmp() with tcg_temp_free_i32(). Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Peter Maydell 提交于
Add support (if CONFIG_DEBUG_TCG is defined) for debugging leakage of temporary variables. Generally any temporaries created by a target while it is translating an instruction should be freed by the end of that instruction; otherwise carefully crafted guest code could cause TCG to run out of temporaries and assert. By calling tcg_check_temp_count() after each instruction we can check that we are not leaking temporaries in this way. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Adam Lackorzynski 提交于
Integrate secondary CPU reset into arm_boot, removing it from realview.c. On non-Linux systems secondary CPUs start with the same entry as the boot CPU. Signed-off-by: NAdam Lackorzynski <adam@os.inf.tu-dresden.de> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Adam Lackorzynski 提交于
Implement VA->PA translations by cp15-c7 that went through unchanged previously. Signed-off-by: NAdam Lackorzynski <adam@os.inf.tu-dresden.de> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Adam Lackorzynski 提交于
Fix selection of target list filter mode. Signed-off-by: NAdam Lackorzynski <adam@os.inf.tu-dresden.de> Reviewed-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Peter Maydell 提交于
The code for Thumb2 ORNS (or negated and set flags) was trashing a TCG input register which was needed later for use in calculating flags, with the effect that the carry flag was always set with the wrong sense. Fix this by using the TCG orc op instead of separate not and or ops. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Andreas Färber 提交于
When failing due to conflicting I/O port registrations, include the offending I/O port address in the message. Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: NAndreas Färber <andreas.faerber@web.de> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Jes Sorensen 提交于
Optional feature allowing a user to generate the probe list to match the name of the binary, in case they wish to install qemu under a different name than qemu-{system,user},<arch> Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Acked-by: NPaolo Bonzini <pbonzini@redhat.com> Acked-by: NStefan Hajnoczi <stefaha@linux.vnet.ibm.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Peter Maydell 提交于
Fix two bugs in the translation of the instructions VMOV sa,sb,rx,ry and VMOV rx,ry,sa,sb (which copy between a pair of ARM core registers and a pair of VFP single precision registers): * An incorrect condition meant these instruction patterns were being treated as load/store multiple, which resulted in the generation of bad code and a runtime segfault * The order of the core register pair was reversed so the values would go to the wrong registers Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Stefan Weil 提交于
MinGW optionally includes pdcurses, so add support for it. Signed-off-by: NStefan Weil <weil@mail.berlios.de> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Peter Maydell 提交于
In v7 of the ARM architecture, WFI (wait for interrupt) is a first-class instruction, but in previous versions this functionality was provided via a cp15 coprocessor register. Add correct feature checks to the decoding of the cp15 WFI instructions so that they behave correctly for newer cores. In particular, the old 0,c7,c8,2 encoding used on ARM940 has been reused for VA-to-PA translation in v6 and v7. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NAdam Lackorzynski <adam@os.inf.tu-dresden.de> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Jason Wang 提交于
Signed-off-by: NJason Wang <jasowang@redhat.com> Acked-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Juan Quintela 提交于
Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Juan Quintela 提交于
It was migrating the wrong structures, no way it would work Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Juan Quintela 提交于
It was migrating the wrong structures, no way it would work Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Juan Quintela 提交于
It was deprecated, and it has no users. Signed-off-by: NJuan Quintela <quintela@redhat.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Aurelien Jarno 提交于
sd_set_cb() calls bdrv_is_read_only() and bdrv_is_inserted() even if no block driver is associated with the card reader. This patch fixes the issues by not setting the irq in this case, this fixes ARM versatile crash. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Benjamin Poirier 提交于
Signed-off-by: NBenjamin Poirier <benjamin.poirier@gmail.com> Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: NJason Wang <jasowang@redhat.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Stefan Hajnoczi 提交于
The following additions to the tracing documentation are included: 1. Move "stderr" backend documentation to top-level and out of "simple" backend. Include hints on when this backend is useful. 2. Document the "simple" backend thread-safety limitation. 3. Document the "dtrace" backend for SystemTap. Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Stefan Hajnoczi 提交于
The simpletrace.py script pretty-prints a binary trace file. Most of the code can be reused by trace file analysis scripts, so turn it into a module. Here is an example script that uses the new simpletrace module: #!/usr/bin/env python # Print virtqueue elements that were never returned to the guest. import simpletrace class VirtqueueRequestTracker(simpletrace.Analyzer): def __init__(self): self.elems = set() def virtqueue_pop(self, vq, elem, in_num, out_num): self.elems.add(elem) def virtqueue_fill(self, vq, elem, length, idx): self.elems.remove(elem) def end(self): for elem in self.elems: print hex(elem) simpletrace.run(VirtqueueRequestTracker()) The simpletrace API is based around the Analyzer class. Users implement an analyzer subclass and add methods for trace events they want to process. A catchall() method is invoked for trace events which do not have dedicated methods. Finally, there are also begin() and end() methods like in sed that can be used to perform setup or print statistics at the end. A binary trace file is processed either with: simpletrace.run(analyzer) # uses command-line args or with: simpletrace.process('path/to/trace-events', 'path/to/trace-file', analyzer) Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-
由 Peter Maydell 提交于
When emulating a 32 bit Linux user-mode program on a 64 bit target we implement the llseek syscall in terms of lseek. Correct a bug which meant we were silently casting the result of host lseek() to a 32 bit integer as it passed through get_errno() and thus throwing away the top half. We also don't try to store the result back to userspace unless the seek succeeded; this matches the kernel behaviour. Thanks to Eoghan Sherry for identifying the problem and suggesting a solution. Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>
-