With the separation of the device lookup (via usb_find_device) and
packet processing we can lookup device and endpoint before setting up
the usb packet.  So we can initialize USBPacket->ep early and keep it
valid for the whole lifecycle of the USBPacket.  Also the devaddr and
devep fields are not needed any more.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add a "nr" and "pid" fields to USBEndpoint so you can easily figure the
endpoint number and direction of any given endpoint.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add enum to track the status of USBPackets, use that instead of the
owner pointer to figure whenever a usb packet is currently in flight
or not.  Add some more packet status sanity checks.  Also rename the
USBEndpoint pointer from "owner" to "ep".
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

There is no reason to have a separate usb_generic_handle_packet function
any more, fold it into usb_handle_packet().  Also call the do_token_*
functions which handle control transfer emulation for control pipe
packets only.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

All drivers except usb-hub use usb_generic_handle_packet.  The only
reason the usb hub has its own function is that it used to be called
with packets which are intended for downstream devices.  With the new,
separate device lookup step this doesn't happen any more, so the need
for a different handle_packet callback is gone.

So we can kill the handle_packet callback and just call
usb_generic_handle_packet directly.  The special hub handling in
usb_handle_packet() can go away for the same reason.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Switch over xHCI to use the new usb_find_device()
function for device lookup.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Switch over musb to use the new usb_find_device()
function for device lookup.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Switch over OHCI to use the new usb_find_device()
function for device lookup.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Switch over EHCI to use the new usb_find_device()
function for device lookup.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Switch over UHCI to use the new usb_find_device()
function for device lookup.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Allow passing in a NULL pointer, return USB_RET_NODEV in that case.
Removes the burden to to a NULL pointer check from the callers.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Implement the find_device callback for the usb hub.  It'll loop over all
ports, calling usb_find_device for all enabled ports until it finds a
matching device.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Add usb_find_device().  This function will check whenever a device with
a specific address is connected to the specified port.  Usually this
will just check state and address of the device hooked up to the port,
but in case of a hub it will ask the hub to check all hub ports for a
matching device.

This patch doesn't put the code into use yet, see the following patches
for details.

The master plan is to separate device lookup and packet processing.
Right now the usb code simply walks all devices, calls
usb_handle_packet() on each until one accepts the packet (by returning
something different that USB_RET_NODEV).  I want to have a device lookup
first, then call usb_handle_packet() once, for the device which actually
processes the packet.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

No users left.  Zap it.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

The USB subsystem pipes internal reset notifications through
usb_handle_packet() with a special magic PID.  This indirection
is a pretty pointless excercise as it ends up being handled by
usb_generic_handle_packet anyway.

Replace the USB_MSG_RESET with a usb_device_reset() function
which can be called directly.  Also rename the existing usb_reset()
function to usb_port_reset() to avoid confusion.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

The USB subsystem pipes internal attach/detach notifications through
usb_handle_packet() with a special magic PID.  This indirection is a
pretty pointless excercise as it ends up being handled by
usb_generic_handle_packet anyway.  Remove it.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

This patch adds the posibility to filter out certain devices from redirecion.
To use this pass the filter property to -device usb-redir.  The filter
property takes a string consisting of filter rules, the format for a rule is:
<class>:<vendor>:<product>:<version>:<allow>

-1 can be used to allow any value for a field.

Muliple rules can be concatonated using | as a separator. Note that if
a device matches none of the passed in rules, redirecting it will not be
allowed!

Example:
-device usb-redir,filter='-1:0x0781:0x5567:-1:0|0x08:-1:-1:-1:1'

This example will deny the Sandisk Cruzer Blade being redirected, as it
has a usb id of 0781:5567, it will allow any other usb mass storage devices,
and it will deny any other devices (the default for devices not matching any
of the rules.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

According to the EHCI spec port ownership should revert to the EHCI controller
on device disconnect. This fixes the problem of a port getting stuck on USB 1
when using redirection and plugging in a USB 2 device after a USB 1 device
has been redirected.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

The OS is allowed to make the UHCI Controller run in circles.  That is
usually done to serve multiple connected USB devices in a robin-round
fashion, so the available USB bandwidth is evenly distributed between
devices.

The uhci emulation handles this in a very poor way though.  When it
figures it runs in circles it stops processing unconditionally, so
it usually processes at most a single transfer desriptor per queue,
even if there are multiple transfer descriptors are queued up.

This patch makes uhci act in a more sophisticated way.  It keeps track
of successful processed transfer descriptors and transfered bytes.  Then
it will stop processing when there is nothing to do (no transfer
descriptor was completed the last round) or when the transfered data
reaches the usb bandwidth limit.

Result is that the usb-storage devices connected to uhci are ten times
faster, mkfs.vfat time for a 64M stick goes down from five seconds to
a half second.  Reason for this is that we are now processing up to 20
transfer descriptors (with 64 bytes each) per frame instead of a single
one.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Makefile, Makefile.hw, Makefile.target and libcacard/Makefile
added GLIB_CFLAGS to QEMU_CFLAGS.

Makefile.objs does this, too, and is included by all other
Makefiles, so GLIB_CFLAGS were added twice (reported by malc).
Signed-off-by: NStefan Weil <sw@weilnetz.de>
Signed-off-by: Nmalc <av1474@comtv.ru>

The ARM devboard models (vexpress-a9, realview, versatilepb, etc)
were accidentally trying to set one of the arm_sysctl properties
after device init. This has now become a fatal error; set the property
before device init where it should be done instead.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

* bonzini/qdev-props-for-anthony: (25 commits)
  qdev: remove unused fields from PropertyInfo
  qdev: initialize properties via QOM
  qdev: inline qdev_prop_set into qdev_prop_set_ptr
  qdev: access properties via QOM
  qdev: fix off-by-one
  qdev: let QOM free properties
  qdev: remove parse/print methods for pointer properties
  qdev: make the non-legacy pci address property accept an integer
  qdev: remove parse/print methods for mac properties
  qdev: remove print/parse methods from LostTickPolicy properties
  qdev: remove parse method for string properties
  qdev: allow reusing get/set for legacy property
  qdev: remove direct calls to print/parse
  qom: add property get/set wrappers for links
  qom: fix canonical paths vs. interfaces
  qom: use object_resolve_path_type for links
  qom: add object_resolve_path_type
  qom: fix off-by-one
  qom: add property get/set wrappers for C types
  qom: add QObject-based property get/set wrappers
  ...

* aneesh/for-upstream:
  hw/9pfs: Remove O_NOATIME flag from 9pfs open() calls in readonly mode
  hw/9pfs: Update MAINTAINERS file
  fsdev: Fix parameter parsing for proxy helper
  hw/9pfs: Fix crash when mounting with synthfs
  hw/9pfs: Preserve S_ISGID
  hw/9pfs: Add new security model mapped-file.

* sweil/w32:
  w32: Initialise critical section before starting thread (fix #922131)
  w32: Build windows and console executables

Signed-off-by: Nmalc <av1474@comtv.ru>

This patch was contributed by Bogdan Harjoc. I added some assertions.
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NStefan Weil <sw@weilnetz.de>

System emulation executables with SDL are typically windows
executables. Sometimes console executables are more useful,
so create both variants if linker option -mwindows was detected.

v2:
This version uses QEMU_PROGW / QEMU_PROG instead of QEMU_PROG / QEMU_PROGC.
Signed-off-by: NStefan Weil <sw@weilnetz.de>

Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Similarly, use the object properties also to set the default
values of the qdev properties.  This requires reordering
registration and initialization.
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

qdev_prop_set is not needed anymore except for hacks, simplify it and
inline it.
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Do not poke anymore in the struct when accessing qdev properties.
Instead, ask the object to set the right value.
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Integer properties did not work.
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Drop the special free callback.  Instead, register a "regular"
release method in the non-legacy property.
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Pointer properties (except for PROP_PTR of course) should not need a
legacy counterpart.  In the future, relative paths will ensure that
QEMU will support the same syntax as now for drives etc..
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

PCI addresses are set with qdev_prop_uint32.  Thus we make the QOM
property accept a device and function encoded in an 8-bit integer,
instead of the magic dd.f hex string.
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Also generalize the code so that we can have more enum properties
in the future.
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

We need the print method to put double quotes, but parsing is not special.
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

In some cases, a legacy property does need a special print method
but not a special parse method.  In this case, we can reuse the get/set
from the static (non-legacy) property.

If neither parse nor print is needed, though, do not register the
legacy property at all.  The previous patch ensures that the right
fallback will be used.
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

There's no need to call into ->parse and ->print manually.  The
QOM legacy properties do that for us.

Furthermore, in some cases legacy and static properties have exactly
the same behavior, and we could drop the legacy properties right away.
Add an appropriate fallback to prepare for this.
Reviewed-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>