Code duplicated in commit 0ecdffbb.  The two versions are similar, but
not identical:

* cmos_init() reports errors to stderr, pc_boot_set() via
  qemu_error().  The latter is fine for both, so pick that for the
  common code.

* cmos_init() obeys fd_bootchk, pc_boot_set() ignores it.  Make it a
  parameter of the common code.

Commit 0ecdffbb created pc_boot_set() for use from monitor command
"boot_set", via qemu_boot_set().  pc_boot_set() reports errors to
cur_mon, which works fine for monitor code.

Commit e0f084bf reused the function int reset handler
restore_boot_devices().  Use of cur_mon is problematic in that
context.  For instance, the "Too many boot devices for PC" error for
"-boot order=abcdefgh,once=c" goes to the monitor instead of stderr.
The monitor may not even exist.

Fix by switching to qemu_error().

A monitor may not even exist.

Change load_vmstate() to use qemu_error() instead of monitor_printf().
Parameter mon is now unused, remove it.

The monitor_printf() reports failure.  Printing is wrong, because the
caller tries various arguments, and expects the function to fail for
some or all.

Disabled since commit 26a9e82a.  Remove it.

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: Nmalc <av1474@comtv.ru>

Something bad has happened in the merge of commit 0ee44250, as
the log message says it's supposed to be in qemu_system_reset()
but it is do_vm_stop().

Possibly, it was a problem with the conflict resolution with
ea375f9a (which has been merged first).

This commit moves (again) the RESET event into qemu_system_reset().
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

A SIB byte with an index of 4 means "no scaled index", even if the scale
value is not 0. In 64-bit mode, if REX.X is used, an index of 4 selects
%r12. This is correctly handled by the computation of the index variable,
which includes the index bits, and also the REX.X prefix:

    index = ((code >> 3) & 7) | REX_X(s);

Thanks to Avi Kivity, Jamie Lokier and Malc for the analysis of the
problem and the initial patch.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Now that we changed all create calls to return errno, just print it.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

cleanup code is identical for error/success cases.  Only difference
are goto labels.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

fail_gd error case would also free rgd_buf that was already freed
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

we shouldn't call W*() macros until we check that fork worked.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Remove not needed ret = 0 assignment.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Allow the user to specify the format of the image to rebase.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

These files are created by configure and grow
unnecessarily at each new call of configure:

roms/seabios/config.mak
roms/vgabios/config.mak
libhw32/config.mak
libhw64/config.mak

libhw32/config.mak and libhw64/config.mak set
compiler options, and the wrong old code results
in very long command lines.

The new code always writes a new config.mak
instead of appending to an existing one.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

It's emitted whenever the watchdog device's timer expires. The action
taken is provided in the 'data' member.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Patch http://permalink.gmane.org/gmane.comp.emulators.qemu/63472 handle
close when using tty devices (like /dev/ttyS0),
yet tty based monitor are not restoring terminal attributes (as done
with stdio based monitor), when closing qemu after that command:
$ qemu -monitor /dev/tty
the terminal is not responding until you write reset (blindly),
this patch fix it
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Use led status notification support in vnc.

The qemu vnc server keeps track of the capslock and numlock states based
on the key presses it receives from the vnc client.  But this fails in
case the guests idea of the capslock and numlock state changes for other
reasons.  One case is guest reboot (+ keyboard reset).  Another case are
more recent windows versions which reset capslock state before
presenting the login screen.

Usually guests use the keyboard leds to signal the capslock and numlock
state to the user, so we can use this to better keep track of capslock
and numlock state in the qemu vnc server.

Also toggle the numlock and capslock states on keydown events (instead
of keyup).  Guests do the same.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Add led status notification support to the usb kbd driver.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Add led status notification support to the ps/2 kbd driver.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Adds infrastructure for keyboard led status tracking to qemu.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

You're supposed to use scsi-generic for that.  Which rejects anything
but /dev/sg*.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Guest device and host netdev are peers, i.e. it's a 1:1 relation.
However, we fail to enforce that:

    $ qemu -nodefaults --nographic -netdev user,id=net0 -device e1000,netdev=net0 -device virtio-net-pci,netdev=net0 -monitor stdio
    QEMU 0.12.50 monitor - type 'help' for more information
    (qemu) info network
    Devices not on any VLAN:
      net0: net=10.0.2.0, restricted=n peer=virtio-net-pci.0
      e1000.0: model=e1000,macaddr=52:54:00:12:34:56 peer=net0
      virtio-net-pci.0: model=virtio-net-pci,macaddr=52:54:00:12:34:57 peer=net0

It's all downhill from there.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Property "vlan" reports "failed to parse" even when the value parses
just fine, but the result doesn't name an existing VLAN.

Similarly, properties "drive", "chr" and "netdev" misleadingly report
"failed to parse" when the value doesn't name an existing host device.

Change PropertyInfo method parse to return an error code, so that
qdev_prop_parse() can report the error more accurately.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Use the named constant instead of -1.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Reported-by: N"Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

net.c used a constant to signify no MSI vectors were specified. Extend
that to all qdev devices.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Reported-by: N"Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

According to AMD document 21485D pp.141, APROMWE is bit 8 of BCR2.
Signed-off-by: NChristopher Kilgour <techie@whiterocker.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Want share them with vnc and spice.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NIzik Eidus <ieidus@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Emitted whenever the RTC time changes.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Now we can say it's useful, the following changes have been made:

- Put events in alphabetical order
- Add examples to all events
- Document all 'data' members
- Small corrections and cleanups
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>