If the CPU is a PMSA config with no MPU implemented, then the
SCTLR.M bit should be RAZ/WI, so that the guest can never
turn on the non-existent MPU.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1493122030-32191-7-git-send-email-peter.maydell@linaro.org

Fix the handling of QOM properties for PMSA CPUs with no MPU:

Allow no-MPU to be specified by either:
 * has-mpu = false
 * pmsav7_dregion = 0
and make setting one imply the other. Don't clear the PMSA
feature bit in this situation.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1493122030-32191-6-git-send-email-peter.maydell@linaro.org

ARM CPUs come in two flavours:
 * proper MMU ("VMSA")
 * only an MPU ("PMSA")
For PMSA, the MPU may be implemented, or not (in which case there
is default "always acts the same" behaviour, but it isn't guest
programmable).

QEMU is a bit confused about how we indicate this: we have an
ARM_FEATURE_MPU, but it's not clear whether this indicates
"PMSA, not VMSA" or "PMSA and MPU present" , and sometimes we
use it for one purpose and sometimes the other.

Currently trying to implement a PMSA-without-MPU core won't
work correctly because we turn off the ARM_FEATURE_MPU bit
and then a lot of things which should still exist get
turned off too.

As the first step in cleaning this up, rename the feature
bit to ARM_FEATURE_PMSA, which indicates a PMSA CPU (with
or without MPU).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1493122030-32191-5-git-send-email-peter.maydell@linaro.org

Make M profile use completely separate ARMMMUIdx values from
those that A profile CPUs use. This is a prelude to adding
support for the MPU and for v8M, which together will require
6 MMU indexes which don't map cleanly onto the A profile
uses:
 non secure User
 non secure Privileged
 non secure Privileged, execution priority < 0
 secure User
 secure Privileged
 secure Privileged, execution priority < 0
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1493122030-32191-4-git-send-email-peter.maydell@linaro.org

The M profile CPU's MPU has an awkward corner case which we
would like to implement with a different MMU index.

We can avoid having to bump the number of MMU modes ARM
uses, because some of our existing MMU indexes are only
used by non-M-profile CPUs, so we can borrow one.
To avoid that getting too confusing, clean up the code
to try to keep the two meanings of the index separate.

Instead of ARMMMUIdx enum values being identical to core QEMU
MMU index values, they are now the core index values with some
high bits set. Any particular CPU always uses the same high
bits (so eventually A profile cores and M profile cores will
use different bits). New functions arm_to_core_mmu_idx()
and core_to_arm_mmu_idx() convert between the two.

In general core index values are stored in 'int' types, and
ARM values are stored in ARMMMUIdx types.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1493122030-32191-3-git-send-email-peter.maydell@linaro.org

When identifying the DFSR format for an alignment fault, use
the mmu index that we are passed, rather than calling cpu_mmu_index()
to get the mmu index for the current CPU state. This doesn't actually
make any difference since the only cases where the current MMU index
differs from the index used for the load are the "unprivileged
load/store" instructions, and in that case the mmu index may
differ but the translation regime is the same (apart from the
"use from Hyp mode" case which is UNPREDICTABLE).
However it's the more logical thing to do.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1493122030-32191-2-git-send-email-peter.maydell@linaro.org

The PMUv3 driver of linux kernel (in arch/arm64/kernel/perf_event.c)
relies on the PMUVER field of id_aa64dfr0_el1 to decide if PMU support
is present or not. This patch clears the PMUVER field under TCG mode
when vPMU=off. Without it, PMUv3 will init insider guest VMs even
with vPMU=off. This patch also removes a redundant line inside the
if-statement.
Signed-off-by: NWei Huang <wei@redhat.com>
Message-id: 1495123889-32301-1-git-send-email-wei@redhat.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

When we calculate the mask to use to get the group priority from
an interrupt priority, the way that NS BPR1 is handled differs
from how BPR0 and S BPR1 work -- a BPR1 value of 1 means
the group priority is in bits [7:1], whereas for BPR0 and S BPR1
this is indicated by a 0 BPR value.

Subtract 1 from the BPR value before creating the mask if
we're using the NS BPR value, for both hardware and virtual
interrupts, as the GICv3 pseudocode does, and fix the comments
accordingly.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1493226792-3237-4-git-send-email-peter.maydell@linaro.org

icc_bpr_write() was not enforcing that writing a value below the
minimum for the BPR should behave as if the BPR was set to the
minimum value. This doesn't make a difference for the secure
BPRs (since we define the minimum for the QEMU implementation
as zero) but did mean we were allowing the NS BPR1 to be set to
0 when 1 should be the lowest value.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1493226792-3237-3-git-send-email-peter.maydell@linaro.org

We were setting the VBPR1 field of VMCR_EL2 to icv_min_vbpr()
on reset, but this is not correct. The field should reset to
the minimum value of ICV_BPR0_EL1 plus one.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1493226792-3237-2-git-send-email-peter.maydell@linaro.org

Don't allow load_uboot_image() to proceed when less bytes than
header-size was read.
Signed-off-by: NAndrew Jones <drjones@redhat.com>
Message-id: 20170524091315.20284-1-drjones@redhat.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Ensure that C99 macros are defined regardless of the inclusion order of
headers in vixl. This is required at least on NetBSD.

The vixl/globals.h headers defines __STDC_CONSTANT_MACROS and must be
included before other system headers.

This file defines unconditionally the following macros, without altering
the original sources:
 - __STDC_CONSTANT_MACROS
 - __STDC_LIMIT_MACROS
 - __STDC_FORMAT_MACROS
Signed-off-by: NKamil Rytarowski <n54@gmx.com>
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20170514051820.15985-1-n54@gmx.com
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

QAPI patches for 2017-05-31

# gpg: Signature made Wed 31 May 2017 18:06:39 BST
# gpg:                using RSA key 0x3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg:                 aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867  4E5F 3870 B400 EB91 8653

* remotes/armbru/tags/pull-qapi-2017-05-31:
  qapi: Reject alternates that can't work with keyval_parse()
  tests/qapi-schema: Avoid 'str' in alternate test cases
  qapi: Document visit_type_any() issues with keyval input
  qobject-input-visitor: Reject non-finite numbers with keyval
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Misc linux-user updates

# gpg: Signature made Wed 31 May 2017 12:33:17 BST
# gpg:                using RSA key 0xB44890DEDE3C9BC0
# gpg: Good signature from "Riku Voipio <riku.voipio@iki.fi>"
# gpg:                 aka "Riku Voipio <riku.voipio@linaro.org>"
# Primary key fingerprint: FF82 03C8 C391 98AE 0581  41EF B448 90DE DE3C 9BC0

* remotes/riku/tags/pull-linux-user-20170531:
  linux-user: add strace support for uinfo structure of rt_sigqueueinfo() and rt_tgsigqueueinfo()
  linux-user: fix inconsistent spaces in print_siginfo() output
  linux-user: add rt_tgsigqueueinfo() strace
  linux-user: add support for rt_tgsigqueueinfo() system call
  linux-user: fix argument type declaration of rt_sigqueinfo() syscall
  linux-user: fix mismatch of lock/unlock_user() invocations in rt_sigqueinfo() syscall
  linux-user: fix ssetmask() system call
  linux-user: add tkill(), tgkill() and rt_sigqueueinfo() strace
  linux-user: add strace for getuid(), gettid(), getppid(), geteuid()
  linux-user: remove all traces of qemu from /proc/self/cmdline
  linux-user: allocate heap memory for execve arguments
  linux-user: fix inotify
  linux-user: fix fadvise64_64() on ppc
  linux-user: fix eventfd
  linux-user: call fd_trans_target_to_host_data() for write()
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

migration/next for 20170531

# gpg: Signature made Wed 31 May 2017 08:53:06 BST
# gpg:                using RSA key 0xF487EF185872D723
# gpg: Good signature from "Juan Quintela <quintela@redhat.com>"
# gpg:                 aka "Juan Quintela <quintela@trasno.org>"
# Primary key fingerprint: 1899 FF8E DEBF 58CC EE03  4B82 F487 EF18 5872 D723

* remotes/juanquintela/tags/migration/20170531:
  migration: use dirty_rate_high_cnt more aggressively
  migration: set bytes_xfer_* outside of autoconverge logic
  migration: set dirty_pages_rate before autoconverge logic
  migration: keep bytes_xfer_prev init'd to zero
  migration: Create savevm.h for functions exported from savevm.c
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Queued target/sh4 patches

# gpg: Signature made Tue 30 May 2017 20:12:10 BST
# gpg:                using RSA key 0xBA9C78061DDD8C9B
# gpg: Good signature from "Aurelien Jarno <aurelien@aurel32.net>"
# gpg:                 aka "Aurelien Jarno <aurelien@jarno.fr>"
# gpg:                 aka "Aurelien Jarno <aurel32@debian.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg:          It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 7746 2642 A9EF 94FD 0F77  196D BA9C 7806 1DDD 8C9B

* remotes/aurel/tags/pull-target-sh4-20170530:
  target/sh4: fix RTE instruction delay slot
  target/sh4: ignore interrupts in a delay slot
  target/sh4: introduce DELAY_SLOT_MASK
  target/sh4: fix reset when using a kernel and an initrd
  target/sh4: log unauthorized accesses using qemu_log_mask
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Various bugfixes and code cleanups. Most notably, it fixes metadata handling in
mapped-file security mode (especially for the virtfs root).

# gpg: Signature made Tue 30 May 2017 14:36:22 BST
# gpg:                using DSA key 0x02FC3AEB0101DBC2
# gpg: Good signature from "Greg Kurz <groug@kaod.org>"
# gpg:                 aka "Greg Kurz <groug@free.fr>"
# gpg:                 aka "Greg Kurz <gkurz@linux.vnet.ibm.com>"
# gpg:                 aka "Gregory Kurz (Groug) <groug@free.fr>"
# gpg:                 aka "[jpeg image of size 3330]"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 2BD4 3B44 535E C0A7 9894  DBA2 02FC 3AEB 0101 DBC2

* remotes/gkurz/tags/for-upstream:
  9pfs: local: metadata file for the VirtFS root
  9pfs: local: simplify file opening
  9pfs: local: resolve special directories in paths
  9pfs: check return value of v9fs_co_name_to_path()
  util: drop old utimensat() compat code
  9pfs: assume utimensat() and futimens() are present
  fsdev: fix virtfs-proxy-helper cwd
  9pfs: local: fix unlink of alien files in mapped-file mode
  9pfs: drop pdu_push_and_notify()
  fsdev: don't allow unknown format in marshal/unmarshal
  virtio-9p/xen-9p: move 9p specific bits to core 9p code
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

NUMA fixes, 2017-05-30

# gpg: Signature made Tue 30 May 2017 20:10:44 BST
# gpg:                using RSA key 0x2807936F984DC5A6
# gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>"
# Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF  D1AA 2807 936F 984D C5A6

* remotes/ehabkost/tags/numa-pull-request:
  numa: Fix format string for "Invalid node" message
  numa-test: fix query-cpus leaks
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Alternates are sum types like unions, but use the JSON type on the
wire / QType in QObject instead of an explicit tag.  That's why we
require alternate members to have distinct QTypes.

The recently introduced keyval_parse() (commit d454dbe0) can only
produce string scalars.  The qobject_input_visitor_new_keyval() input
visitor mostly hides the difference, so code using a QObject input
visitor doesn't have to care whether its input was parsed from JSON or
KEY=VALUE,...  The difference leaks for alternates, as noted in commit
0ee9ae7c: a non-string, non-enum scalar alternate value can't currently
be expressed.

In part, this is just our insufficiently sophisticated implementation.
Consider alternate type 'GuestFileWhence'.  It has an integer member
and a 'QGASeek' member.  The latter is an enumeration with values
'set', 'cur', 'end'.  The meaning of b=set, b=cur, b=end, b=0, b=1 and
so forth is perfectly obvious.  However, our current implementation
falls apart at run time for b=0, b=1, and so forth.  Fixable, but not
today; add a test case and a TODO comment.

Now consider an alternate type with a string and an integer member.
What's the meaning of a=42?  Is it the string "42" or the integer 42?
Whichever meaning you pick makes the other inexpressible.  This isn't
just an implementation problem, it's fundamental.  Our current
implementation will pick string.

So far, we haven't needed such alternates.  To make sure we stop and
think before we add one that cannot sanely work with keyval_parse(),
let's require alternate members to have sufficiently distinct
representation in KEY=VALUE,... syntax:

* A string member clashes with any other scalar member

* An enumeration member clashes with bool members when it has value
  'on' or 'off'.

* An enumeration member clashes with numeric members when it has a
  value that starts with '-', '+', or a decimal digit.  This is a
  rather lazy approximation of the actual number syntax accepted by
  the visitor.

  Note that enumeration values starting with '-' and '+' are rejected
  elsewhere already, but better safe than sorry.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-Id: <1495471335-23707-5-git-send-email-armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>

The next commit is going to make alternate members of type 'str'
conflict with other scalar types.  Would break a few test cases that
don't actually require 'str'.  Flip them from 'str' to 'bool' or
'EnumOne'.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-Id: <1495471335-23707-4-git-send-email-armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>

It's already documented in keyval.c (commit 0ee9ae7c), but visitor.h
can use a note, too.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-Id: <1495471335-23707-3-git-send-email-armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>

The QObject input visitor can produce only finite numbers when its
input comes out of the JSON parser, because the the JSON parser
implements RFC 7159, which provides no syntax for infinity and NaN.

However, it can produce infinity and NaN when its input comes out of
keyval_parse(), because we parse with strtod() then.

The keyval variant should not be able to express things the JSON
variant can't.  Rejecting non-finite numbers there is the conservative
fix.  It's also minimally invasive.

We could instead extend our JSON dialect to provide for infinity and
NaN.  Not today.

Note that the JSON formatter can emit non-finite numbers (marked FIXME
in commit 6e8e5cb9).
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Message-Id: <1495471335-23707-2-git-send-email-armbru@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Reviewed-by: NMarc-André Lureau <marcandre.lureau@redhat.com>

The commit message from 070afca2 suggests that dirty_rate_high_cnt
should be used more aggressively to start throttling after two
iterations instead of four. The code, however, only changes the auto
convergence behaviour to throttle after three iterations. This makes the
behaviour more aggressive by kicking off throttling after two iterations
as originally intended.
Signed-off-by: NFelipe Franciosi <felipe@nutanix.com>
Reviewed-by: NPeter Xu <peterx@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

The bytes_xfer_now/prev counters are only used by the auto convergence
logic. However, they are used alongside the dirty_pages_rate counter,
which is calculated (and required) outside of this logic. The problem
with this approach is that if the auto convergence capability is changed
while a migration is ongoing, the relationship of the counters will be
broken.

This moves the management of bytes_xfer_now/prev counters outside of the
auto convergence logic to address this issue.
Signed-off-by: NFelipe Franciosi <felipe@nutanix.com>
Reviewed-by: NPeter Xu <peterx@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

Currently, a "period" in the RAM migration logic is at least a second
long and accounts for what happened since the last period (or the
beginning of the migration). The dirty_pages_rate counter is calculated
at the end this logic.

If the auto convergence capability is enabled from the start of the
migration, it won't be able to use this counter the first time around.
This calculates dirty_pages_rate as soon as a period is deemed over,
which allows for it to be used immediately.
Signed-off-by: NFelipe Franciosi <felipe@nutanix.com>
Reviewed-by: NPeter Xu <peterx@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

The first time migration_bitmap_sync() is called, bytes_xfer_prev is set
to ram_state.bytes_transferred which is, at this point, zero. The next
time migration_bitmap_sync() is called, an iteration has happened and
bytes_xfer_prev is set to 'x' bytes. Most likely, more than one second
has passed, so the auto converge logic will be triggered and
bytes_xfer_now will also be set to 'x' bytes.

This condition is currently masked by dirty_rate_high_cnt, which will
wait for a few iterations before throttling. It would otherwise always
assume zero bytes have been copied and therefore throttle the guest
(possibly) prematurely.

Given bytes_xfer_prev is only used by the auto convergence logic, it
makes sense to only set its value after a check has been made against
bytes_xfer_now.
Signed-off-by: NFelipe Franciosi <felipe@nutanix.com>
Reviewed-by: NPeter Xu <peterx@redhat.com>
Reviewed-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NJuan Quintela <quintela@redhat.com>

This removes last trace of migration functions from sysemu/sysemu.h.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NLaurent Vivier <lvivier@redhat.com>

Some compilers complain about the PRIu16 format string with the
MAX(src, dst) and MAX_NODES arguments.  Example output from Apple LLVM
version 7.3.0 (clang-703.0.31):

  numa.c:236:20: warning: format specifies type 'unsigned short' but the argument has type 'int' [-Wformat]
                     MAX(src, dst), MAX_NODES);
  ~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~
  include/qapi/error.h:163:35: note: expanded from macro 'error_setg'
                          (fmt), ## __VA_ARGS__)
                                    ^~~~~~~~~~~
  glib/2.52.2/include/glib-2.0/glib/gmacros.h:288:20: note: expanded from macro 'MAX'
  #define MAX(a, b)  (((a) > (b)) ? (a) : (b))
                     ^~~~~~~~~~~~~~~~~~~~~~~~~
  numa.c:236:35: warning: format specifies type 'unsigned short' but the argument has type 'int' [-Wformat]
                     MAX(src, dst), MAX_NODES);
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~
  include/qapi/error.h:163:35: note: expanded from macro 'error_setg'
                          (fmt), ## __VA_ARGS__)
                                    ^~~~~~~~~~~
  include/sysemu/sysemu.h:165:19: note: expanded from macro 'MAX_NODES'
  #define MAX_NODES 128
                    ^~~
MAX(src, dst) promotes the src and dst arguments to int, and MAX_NODES
is an int.  Use %d to silence those warnings.
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Message-Id: <20170530184013.31044-1-ehabkost@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

Fix test leaks introduced in commit 2941020a.

(and small extra space removed)

Spotted by ASAN.
Signed-off-by: NMarc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20170526110456.32004-1-marcandre.lureau@redhat.com>
Reviewed-by: NEric Blake <eblake@redhat.com>
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>

The ReTurn from Exception (RTE) instruction loads the system register
(SR) with the saved system register (SSR). It has a delay slot, and
behaves specially according to the SH4 manual:

  The SR value accessed by the instruction in the RTE delay slot is the
  value restored from SSR by the RTE instruction. The SR and MD values
  defined prior to RTE execution are used to fetch the instruction in
  the RTE delay slot.

The instruction in the delay slot being often a NOP, it doesn't cause
any issue most of the time except in some rare cases where the NOP is
being splitted in a different TB (for example when the TCG op buffer
is full). In that case the NOP is fetched with the user permissions
and causes an instruction TLB protection violation exception.

This patches fixes that by introducing a new delay slot flag for the
RTE instruction. Given it's a privileged instruction, the RTE delay
slot instruction is always fetched in privileged mode. It is therefore
enough to to check for this flag in cpu_mmu_index.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Delay slots are indivisible, therefore avoid scheduling an interrupt in
the delay slot. However exceptions are possible.
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

This will make easier the introduction of a new flag in the next
patches.
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

When a masked exception happens, the SH4 CPU generates a non-masked
reset exception, which then jumps to the reset vector at address
0xA0000000. While this is emulated correctly in QEMU, this does not
work when using a kernel and initrd as this address then contain an
illegal instruction (and there is no guarantee the kernel and initrd
haven't been overwritten).

Therefore call qemu_system_reset_request to reload the kernel and initrd
and load the program counter to the kernel entry point.
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

qemu_log_mask() is preferred over fprintf() for logging errors.
Reviewed-by: NPhilippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Block layer patches

# gpg: Signature made Mon 29 May 2017 03:34:59 PM BST
# gpg:                using RSA key 0x7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74  56FE 7F09 B272 C88F 2FD6

* kwolf/tags/for-upstream:
  block/file-*: *_parse_filename() and colons
  block: Fix backing paths for filenames with colons
  block: Tweak error message related to qemu-img amend
  qemu-img: Fix leakage of options on error
  qemu-img: copy *key-secret opts when opening newly created files
  qemu-img: introduce --target-image-opts for 'convert' command
  qemu-img: fix --image-opts usage with dd command
  qemu-img: add support for --object with 'dd' command
  qemu-img: Fix documentation of convert
  qcow2: remove extra local_error variable
  mirror: Drop permissions on s->target on completion
  nvme: Add support for Controller Memory Buffers
  iotests: 147: Don't test inet6 if not available
  qemu-iotests: Test streaming with missing job ID
  stream: fix crash in stream_start() when block_job_create() fails
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

usb: depricate legacy options and hmp commands
usb: fixes for ehci and hub, split xhci variants

# gpg: Signature made Mon 29 May 2017 02:07:17 PM BST
# gpg:                using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg:                 aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg:                 aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901  FE7D 4CB6 D8EE D3E8 7138

* kraxel/tags/pull-usb-20170529-1:
  ehci: fix frame timer invocation.
  usb: don't wakeup during coldplug
  usb-hub: set PORT_STAT_C_SUSPEND on host-initiated wake-up
  xhci: add CONFIG_USB_XHCI_NEC option
  xhci: split into multiple files
  usb: Simplify the parameter parsing of the legacy usb serial device
  usb: Deprecate HMP commands usb_add and usb_del
  usb: Deprecate the legacy -usbdevice option
  ehci: fix overflow in frame timer code
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

pci, virtio, vhost: fixes

A bunch of fixes all over the place. Most notably this fixes
the new MTU feature when using vhost.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

# gpg: Signature made Mon 29 May 2017 01:10:24 AM BST
# gpg:                using RSA key 0x281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg:                 aka "Michael S. Tsirkin <mst@redhat.com>"
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17  0970 C350 3912 AFBE 8E67
#      Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA  8A0D 281F 0DB8 D28D 5469

* mst/tags/for_upstream:
  acpi-test: update expected files
  pc: ACPI BIOS: use highest NUMA node for hotplug mem hole SRAT entry
  vhost-user: pass message as a pointer to process_message_reply()
  virtio_net: Bypass backends for MTU feature negotiation
  intel_iommu: turn off pt before 2.9
  intel_iommu: support passthrough (PT)
  intel_iommu: allow dev-iotlb context entry conditionally
  intel_iommu: use IOMMU_ACCESS_FLAG()
  intel_iommu: provide vtd_ce_get_type()
  intel_iommu: renaming context entry helpers
  x86-iommu: use DeviceClass properties
  memory: remove the last param in memory_region_iommu_replay()
  memory: tune last param of iommu_ops.translate()
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

slirp updates

# gpg: Signature made Sat 27 May 2017 10:36:33 PM BST
# gpg:                using RSA key 0xB0A51BF58C9179C5
# gpg: Good signature from "Samuel Thibault <samuel.thibault@aquilenet.fr>"
# gpg:                 aka "Samuel Thibault <sthibault@debian.org>"
# gpg:                 aka "Samuel Thibault <samuel.thibault@gnu.org>"
# gpg:                 aka "Samuel Thibault <samuel.thibault@inria.fr>"
# gpg:                 aka "Samuel Thibault <samuel.thibault@labri.fr>"
# gpg:                 aka "Samuel Thibault <samuel.thibault@ens-lyon.org>"
# gpg:                 aka "Samuel Thibault <samuel.thibault@u-bordeaux.fr>"
# Primary key fingerprint: 900C B024 B679 31D4 0F82  304B D017 8C76 7D06 9EE6
#      Subkey fingerprint: AEBF 7448 FAB9 453A 4552  390E B0A5 1BF5 8C91 79C5

* sthibault/tags/samuel-thibault:
  Fix total IP header length in forwarded TCP packets
  slirp: fix leak
  slirp: Fix wrong mss bug.
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

# gpg: Signature made Fri 26 May 2017 08:22:27 PM BST
# gpg:                using RSA key 0xBDBE7B27C0DE3057
# gpg: Good signature from "Jeffrey Cody <jcody@redhat.com>"
# gpg:                 aka "Jeffrey Cody <jeff@codyprime.org>"
# gpg:                 aka "Jeffrey Cody <codyprime@gmail.com>"
# Primary key fingerprint: 9957 4B4D 3474 90E7 9D98  D624 BDBE 7B27 C0DE 3057

* jtc/tags/block-pull-request:
  block/gluster: glfs_lseek() workaround
  blockjob: use deferred_to_main_loop to indicate the coroutine has ended
  blockjob: reorganize block_job_completed_txn_abort
  blockjob: strengthen a bit test-blockjob-txn
  blockjob: group BlockJob transaction functions together
  blockjob: introduce block_job_cancel_async, check iostatus invariants
  blockjob: move iostatus reset inside block_job_user_resume
  blockjob: separate monitor and blockjob APIs
  blockjob: introduce block_job_pause/resume_all
  blockjob: introduce block_job_early_fail
  blockjob: remove iostatus_reset callback
  blockjob: remove unnecessary check
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>

ppc patch queue 2017-05-25

Assorted accumulated patches.  These are nearly all bugfixes at one
level or another - some for longstanding problems, others for some
regressions caused by more recent cleanups.

This includes preliminary patches towards fixing migration for Radix
Page Table guests under POWER9 and also fixing some migration
regressions due to the re-organization of the interrupt controller
code.  Not all the pieces are there yet, so those still won't quite
work, but the preliminary changes make sense on their own.

# gpg: Signature made Thu 25 May 2017 04:50:00 AM BST
# gpg:                using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg:                 aka "David Gibson (kernel.org) <dwg@kernel.org>"
# gpg:                 aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg:                 aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E  87DC 6C38 CACA 20D9 B392

* dgibson/tags/ppc-for-2.10-20170525:
  xics: add unrealize handler
  hw/ppc/spapr.c: recover pending LMB unplug info in spapr_lmb_release
  hw/ppc: migrating the DRC state of hotplugged devices
  hw/ppc: removing drc->detach_cb and drc->detach_cb_opaque
  hw/ppc/spapr.c: adding pending_dimm_unplugs to sPAPRMachineState
  spapr: add pre_plug function for memory
  pseries: Restore support for total vcpus not a multiple of threads-per-core for old machine types
  pseries: Split CAS PVR negotiation out into a separate function
  spapr: fix error reporting in xics_system_init()
  spapr_cpu_core: drop reference on ICP object during CPU realization
  hw/ppc/spapr_events.c: removing 'exception' from sPAPREventLogEntry
  spapr: ensure core_slot isn't NULL in spapr_core_unplug()
  xics_kvm: cache already enabled vCPU ids
  spapr: Consolidate HPT freeing code into a routine
  spapr-cpu-core: release ICP object when realization fails
  spapr: sanitize error handling in spapr_ics_create()
  ppc/xics: simplify prototype of xics_spapr_init()
  target/ppc: reset reservation in do_rfi()
Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>