Most of the control flow logic between send and recv (error checking
etc) is the same. Factor this out into a common send_recv() API.
This is then usable by clients, where the control logic for send
and receive differs only by a boolean. E.g.

if (send)
   i2c_send(...):
else
   i2c_recv(...);

becomes:

i2c_send_recv(... , send);
Signed-off-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1465833014-21982-4-git-send-email-fred.konrad@greensocs.com
Changes from FK:
  * Rebased on master.
  * Rebased on my i2c broadcast patch.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

This does a write to every slaves when the I2C bus get a write to address 0.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>
Reviewed-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Tested-By: NHyun Kwon <hyun.kwon@xilinx.com>
Message-id: 1465833014-21982-3-git-send-email-fred.konrad@greensocs.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

The dev field in i2cbus is not used.
So just drop it.
Signed-off-by: NKONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: NAlistair Francis <alistair.francis@xilinx.com>
Reviewed-by: NPeter Crosthwaite <crosthwaite.peter@gmail.com>
Tested-By: NHyun Kwon <hyun.kwon@xilinx.com>
Message-id: 1465833014-21982-2-git-send-email-fred.konrad@greensocs.com
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>

Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.

This commit was created with scripts/clean-includes.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-38-git-send-email-peter.maydell@linaro.org

After previous Peter patch, they are redundant.  This way we don't
assign them except when needed.  Once there, there were lots of case
where the ".fields" indentation was wrong:

     .fields = (VMStateField []) {
and
     .fields =      (VMStateField []) {

Change all the combinations to:

     .fields = (VMStateField[]){

The biggest problem (appart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Reviewed-by: NPeter Maydell <peter.maydell@linaro.org>

Reviewed-by: NPeter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

The category will be used to sort the devices displayed in
the command line help.
Signed-off-by: NMarcel Apfelbaum <marcel.a@redhat.com>
Message-id: 1375107465-25767-4-git-send-email-marcel.a@redhat.com
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Use QOM cast macros I2C_BUS(), SSI_BUS(), PCI_BUS() instead.
Signed-off-by: NAndreas Färber <afaerber@suse.de>

This patch tackles all files that are compiled once, moving
them to subdirectories of hw/.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Done with this script:

cd hw
for i in `find . -name '*.h' | sed 's/^..//'`; do
  echo '\,^#.*include.*["<]'$i'[">], s,'$i',hw/&,'
done | sed -i -f - `find . -type f`

This is so that paths remain valid as files are moved.

Instead, files in hw/dataplane are referenced with the relative path.
We know they are not going to move to include/, and they are the only
include files that are in subdirectories _and_ move.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

It is not being used in hot paths and is obsoleted by I2C_SLAVE()
QOM cast macro. Clean it up using a scripted conversion, so that it
doesn't get used in new code.

Some of its callers were combining it with FROM_I2C_SLAVE() macro, which
is equally obsolete but needs to be replaced in a type-specific way.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Cc: Kuo-Jung Su <dantesu@faraday-tech.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Since 39bffca2 (qdev: register all
types natively through QEMU Object Model), TypeInfo as used in
the common, non-iterative pattern is no longer amended with information
and should therefore be const.

Fix the documented QOM examples:

 sed -i 's/static TypeInfo/static const TypeInfo/g' include/qom/object.h

Since frequently the wrong examples are being copied by contributors of
new devices, fix all types in the tree:

 sed -i 's/^static TypeInfo/static const TypeInfo/g' */*.c
 sed -i 's/^static TypeInfo/static const TypeInfo/g' */*/*.c

This also avoids to piggy-back these changes onto real functional
changes or other refactorings.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Make qbus children show up as link<> properties.  There is no stable
addressing for qbus children so we use an unstable naming convention.

This is okay in QOM though because the composition name is expected to
be what's stable.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

This is far less interesting than it sounds.  We simply add an Object to each
BusState and then register the types appropriately.  Most of the interesting
refactoring will follow in the next patches.

Since we're changing fundamental type names (BusInfo -> BusClass), it all needs
to convert at once.  Fortunately, not a lot of code is affected.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
[AF: Made all new bus TypeInfos static const.]
[AF: Made qbus_free() call object_delete(), required {qom,glib}_allocated]
Signed-off-by: NAndreas Färber <afaerber@suse.de>

In qdev, each bus in practice identified an abstract superclass, but
this was mostly hidden.  In QOM, instead, these abstract classes are
explicit so we can move bus properties there.

All bus property walks are removed, and all device property walks
are changed to look along the class hierarchy instead.

We would have duplicates if class A defines some properties and its
subclass B does not define any, because class_b->props will be
left equal to class_a->props.

The solution here is to reintroduce the class_base_init TypeInfo
callback, that was present in one of the early QOM versions but
removed (on my request...) before committing.

This breaks global bus properties, an obscure feature when used
with the command-line which is actually useful and used when used by
backwards-compatible machine types.  So this patch also adjusts the
global bus properties in hw/pc_piix.c to refer to the abstract class.

Globals and other properties must be modified in the same patch to
avoid complications related to initialization ordering.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Simple code movement in order to simplify future refactoring.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndreas Färber <afaerber@suse.de>

Replace device_init() with generalized type_init().

While at it, unify naming convention: type_init([$prefix_]register_types)
Also, type_init() is a function, so add preceding blank line where
necessary and don't put a semicolon after the closing brace.
Signed-off-by: NAndreas Färber <afaerber@suse.de>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Cc: malc <av1474@comtv.ru>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

It is no longer used in the tree since everything is done natively through
QEMU Object Model.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This was done in a mostly automated fashion.  I did it in three steps and then
rebased it into a single step which avoids repeatedly touching every file in
the tree.

The first step was a sed-based addition of the parent type to the subclass
registration functions.

The second step was another sed-based removal of subclass registration functions
while also adding virtual functions from the base class into a class_init
function as appropriate.

Finally, a python script was used to convert the DeviceInfo structures and
qdev_register_subclass functions to TypeInfo structures, class_init functions,
and type_register_static calls.

We are almost fully converted to QOM after this commit.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This converts two types because smbus is implemented as a subclass of i2c.  It's
extremely difficult to convert these two independently.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

SCSI buses will need to read the children list first-to-last.  This
requires using a QTAILQ, because hell breaks loose if you just try
inserting at the tail (thus reversing the order of all existing
visits from last-to-first to first-to-tail).
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Correct typos of "licenced" to "licensed".
Reviewed-by: NStefan Weil <weil@mail.berlios.de>
Reviewed-by: NAndreas F=E4rber <andreas.faerber@web.de>
Signed-off-by: NMatthew Fernandez <matthew.fernandez@gmail.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

When available, we'd like to be able to access the DeviceState
when registering a savevm.  For buses with a get_dev_path()
function, this will allow us to create more unique savevm
id strings.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

With the recent device handling changes the I2C slave addressing code
was broken. With current code, if a slave with the correct address is

not found on the bus the last scanned slave on the bus will be
addressed. This is wrong. Please find attached a patch to fix it.
Signed-off-by: NJuha Riihimäki <juha.riihimaki@nokia.com>
Acked-by: NRiku Voipio <riku.voipio@iki.fi>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Like qdev_init(), but terminate program via hw_error() instead of
returning an error value.

Use it instead of qdev_init() where terminating the program on failure
is okay, either because it's during machine construction, or because
we know that failure can't happen.

Because relying in the latter is somewhat unclean, and the former is
not always obvious, it would be nice to go back to qdev_init() in the
not-so-obvious cases, only with proper error handling.  I'm leaving
that for another day, because it involves making sure that error
values are properly checked by all callers.

Patchworks-ID: 35168
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

All its users moved to vmstate
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Problem: Our file sys-queue.h is a copy of the BSD file, but there are
some additions and it's not entirely compatible. Because of that, there have
been conflicts with system headers on BSD systems. Some hacks have been
introduced in the commits 15cc9235,
f40d7537,
96555a96 and
3990d09a but the fixes were fragile.

Solution: Avoid the conflict entirely by renaming the functions and the
file. Revert the previous hacks.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Sorry folks, but it has to be.  One more of these invasive qdev patches.

We have a serious design bug in the qdev interface:  device init
callbacks can't signal failure because the init() callback has no
return value.  This patch fixes it.

We have already one case in-tree where this is needed:
Try -device virtio-blk-pci (without drive= specified) and watch qemu
segfault.  This patch fixes it.

With usb+scsi being converted to qdev we'll get more devices where the
init callback can fail for various reasons.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Message-Id: 

This patch is a major overhaul of the device properties.  The properties
are saved directly in the device state struct now, the linked list of
property values is gone.

Advantages:
  * We don't have to maintain the list with the property values.
  * The value in the property list and the value actually used by
    the device can't go out of sync any more (used to happen for
    the pci.devfn == -1 case) because there is only one place where
    the value is stored.
  * A record describing the property is required now, you can't set
    random properties any more.

There are bus-specific and device-specific properties.  The former
should be used for properties common to all bus drivers.  Typical
use case is bus addressing, i.e. pci.devfn and i2c.address.

Properties have a PropertyInfo struct attached with name, size and
function pointers to parse and print properties.  A few common property
types have PropertyInfos defined in qdev-properties.c.  Drivers are free
to implement their own very special property parsers if needed.

Properties can have default values.  If unset they are zero-filled.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

BusInfo is filled with name and size (pretty much like I did for
DeviceInfo as well).  There is also a function pointer to print
bus-specific device information to the monitor.  sysbus is hooked
up there, I've also added a print function for PCI.

Device creation is slightly modified as well:  The device type search
loop now also checks the bus type while scanning the list instead of
complaining thereafter in case of a mismatch.  This effectively gives
each bus a private namespace for device names.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NPaul Brook <paul@codesourcery.com>

Rationale: move device information from code to data structures.

v2: Adapt the drivers missed in the first version.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Implement and use a common device bus state.  The main side-effect is
that creating a bus and attaching it to a parent device are no longer
separate operations.  For legacy code we allow a NULL parent, but that
should go away eventually.

Also tweak creation code to veriry theat a device in on the right bus.
Signed-off-by: NPaul Brook <paul@codesourcery.com>

Signed-off-by: NPaul Brook <paul@codesourcery.com>