Fix a compilation failure if CONFIG_SDL isn't defined (gcc complained
that the label 'invalid_display' wasn't used).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Although the TCG generated code is always in ARM mode, it is possible
that the host code was compiled by gcc in Thumb mode (this is often the
default for Linux distributions targeting ARM v7 only). Handle this
by using BLX imm when doing a call from ARM into Thumb mode.
Since BLX imm is not a conditionalisable instruction, we make
tcg_out_call() no longer take a condition code; we were only ever
using it with COND_AL anyway.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

This reverts commit c995b495.

From Jan Kiszka:

 Ouch, indeed. Moreover, CPU_SAVE_VERSION was not updated (likely the
 reason for the breakage). Thanks for debugging this!

 Anthony (or whoever), please revert this unneeded commit in qemu.git.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch fix the following regression:
1. we should use bitmap_set() and bitmap_clear() to replace vnc_set_bits().
Signed-off-by: NWen Congyang <wency@cn.fujitsu.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

client_migrate_info was put into qmp-commands.hx in the middle of
migrate_set_speed, between the command and it's description. In
addition client_migrate_info put the description before the command
itself, which is the wrong order.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Per default VNC is enabled.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

New option -display none. This option differs from -nographic by not
trying to take control of stdio etc. but instead behaves as if a
graphics display is enabled, except that it doesn't show one.
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch introduces a -display argument which consolidates the
setting of the display mode. Valid options are:
sdl/curses/default
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This removes various code duplication from console.e and sdl.c
Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

The preferred way to create a constant floating point value is to use
make_float32() rather than doing a runtime int32_to_float32().
Convert the code in the VRSQRTS helper to work this way.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Correct the handling of edge cases for the VRECPS instruction:
 * this is a Neon instruction so uses the "standard FPSCR value"
 * (zero, inf) is a special case which returns 2.0
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Fix a TCG temporary leak when translating 32-bit scalar VMULL.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

SMUAD and SMLAD are supposed to set the Q bit if the addition of
the two 16x16 multiply products and optional accumulator overflows
considered as a signed value. However we were only doing this check
for the addition of the accumulator, not when adding the products,
with the effect that we were mishandling the edge case where
both inputs are 0x80008000.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Fix the signed modulo arithmetic helpers for the v6media
instructions (SADD8, SSUB8, SADD16, SSUB16, SASX, SSAX) to set
the GE bits correctly (based on the result of the add or subtract
before it is truncated to 16 bits, not after).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Decode of Thumb load/store was merging together the cases of 'bit 11==0'
(reg+reg LSL imm) and 'bit 11==1' (reg+imm). This happens to work for
valid instruction patterns but meant that we would not UNDEF for the
cases the architecture mandates that we must. Make the decode actually
look at bit 11 as well as [10..8] so that we UNDEF in the right places.

This change also removes what was a spurious unreachable 'case 8',
and correctly frees TCG temporaries on the illegal-insn codepaths.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Correct the broken attempt to calculate the third argument
to unlock_user() in the code path which unlocked the pollfd
array on return from poll() and ppoll() emulation. (This
only caused a problem if unlock_user() wasn't a no-op, eg
if DEBUG_REMAP is defined.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Latest refactorings left vmmouse nonfunctional behind. Fix it by adding
the required device initialization.
Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Fix applesmc REV key string literal hex encoding.
Signed-off-by: NRené Rebe <rene@exactcode.de>
Acked-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

ppc64 is backward compatible, likewise.
Signed-off-by: NRené Rebe <rene@exactcode.de>
Acked-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Add support for 6 SPE instructions: evmra, evmwsmi{a{a}}, evmwumi{a{a}}
Signed-off-by: NFabien Chouteau <chouteau@adacore.com>
Reviewed-by: NNathan Froyd <froydnj@codesourcery.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Currently linuxboot.bin and multiboot.bin option roms override int19
vector to intercept boot process. No sane option rom should do that.
Provide bev entry instead that will be called by BIOS if option rom
is selected for booting.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Acked-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

 - cc97564 Add config option to permit running option roms with bad checksums.
 - 424f217 Add config option to disable MTRR initialization.
 - fb2f10d Prep version for next release.
 - f18b09b Update version to 0.6.2
 - 20fcf9b lets pretend that RTC can be used to wakeup from S4
 - 1efb10b Expand user configurable parameters in Kconfig.
 - 3dba4c2 Support non-local build directory - allow "make OUT=abc/" to work.
 - 42d9771 The vgabios build must depend on autoconf.h.
 - 32aa9f3 fix parallel compilation of SeaBIOS
 - 713be89 Start using Kconfig to configure SeaBIOS settings.
 - b623e7c Change kconfig to emit disabled symbols in autoconf.h.
 - 0da7bfd Build changes for Linux kconfig code to work in seabios dir structure.
 - a4c5daf Initial commit of Kconfig build tool.
 - 4d0c592 Minor boot fixes.
 - 812478e Minor comment / code layout improvement to romlayout.S.
 - 6fc7cf1 Fix to prevent infinite loop in build_pci_path().
 - f5154e2 support T13 EDD3.0 spec
 - d08eb9c Add ability to track PCI paths and add to build_pci_path().
 - 89a1efd Move the CBFS payload setup to later in the boot.
 - 9e881a3 Extract space trimming code from ATA and use in USB and bootorder code.
 - 3c241ed seabios: acpi: add _RMV control method for PCI devices
 - c2002a1 Add support for finding the boot priority of USB drives.
 - a5f2b91 Extend 'usb_pipe' to track the controller and ports of each device.
 - 8bf5503 Add functions for boot device path parsing.
 - c4bd3b9 Use bootprio_find_named_rom() for ramdisk and cbfs payload priorities.
 - ca2bc1c Remove drive->desc field.
 - f13a180 Minor reorganization of some of the boot_xxx code in boot.c.
 - 3da2c1c Move IPL.fw_bootorder to static variables in boot.c.
 - 7bb1584 Move IPL.bev to static variables in boot.c
 - baaadb6 Move IPL.checkfloppysig to a global (CheckFloppySig) in boot.c.
 - a0842f8 Remove Drives global struct in favor of independent global variables.
 - ecbcf77 Don't access drive_g->desc from boot_cdrom().
 - 551caa2 Simplify keyboard reading code in the interactive boot menu.
 - 697e63c Call setup_translation() from map_hd_drive().
 - 3c5e0e1 Rename add_ordered_drive() to add_drive() and use in map_hd_drive().
 - 031ef55 Add stubs to permit devices to specify their boot priority.
 - 72eee3e Simplify boot ordering by building an inclusive boot list.
 - ce24be5 Populate drive_g->desc prior to calling add_bcv_internal().
 - 74fd942 pciinit: fix off-by-one
 - 311f887 Minor build fixes.
 - bca3a87 Track the source of each optionrom deployed.
 - c6629e0 Support qemu based romfile wrappers called out of order.
 - d1a1746 Breakup boot_setup() bootorder code into its own function.
 - f9b0930 Add romfile_loadfile() helper function.
 - b9a7591 Read bootorder file into memory.
 - 2e109a6 Add strchr() function.
 - 1703ea2 Add romfile_name() function.
 - b674152 Add BAID for ahci cdrom.
 - f77e179 Provide full EDD 3.0 info for virtio disk
 - 67863be Enhance layoutrom.py to work around a binutils quirk.
 - 4c90a20 Create separate IPL entry for each CD/DVD
 - 0e6f636 ahci: set controller id
 - 1e924bb ahci: fix off-by-one in port count
 - 7eb0222 ahci: enable io/mem/dma
 - c19fc71 ahci: set dma feature flag
 - 80c2b6e Check if capability enabled in XXX_cmd_data functions.
 - f3fe3aa Require a "_cfuncXX_" symbol prefix for inter-mode c function references.
 - d52fdf6 add ahci support
 - 54fa8ec ata: make helpers available
 - 0a80608 util: add memset_fl()
 - f1f18eb pci: add helper functions for mmio bar access from real mode.
 - af9629b Enhance call32() to pass a parameter to called function.
 - 4057f98 Don't pass return address to transition(32,16,16big) on stack.
 - e2623fc pciinit: use pci_region functions.
 - 58a38e8 pci: introduce pci_region to manage pci io/memory/prefmemory regions.
 - 6d5a217 mark irq9 active high in DSDT
 - 9433098 Report meaningful error if pyserial not present in tools/readserial.py
 - 94dc9c4 Show size of non-relocatable runtime code during build.
 - 4d96edc Cleanup - it's no longer necessary to manually reset global variables.
 - a899945 Allow rom to grow to 256K.
 - 4a446d7 Fix typo preventing relocated space from being used for option roms.
 - 0f67397 fix virtio-blk failure after reboot
 - d4bded4 Add a debug method to AML code.
 - 2f96800 Warn that ohci bulk is not supported.
 - e826465 Enable optionroms to use freed space due to CONFIG_RELOCATE_INIT.
 - 7f55fd3 Move the 32bit init code to high memory at runtime.
 - 025cabd Move init code from _start() to post().
 - 12fa24a Add memalign_tmp() helper function.
 - 244caf8 Try to hard-reboot on rerun of post even on emulators.
 - 5bd01de Don't do shadow copying of optionroms when CONFIG_OPTIONROMS_DEPLOYED.
 - adaf373 Try to hard-reboot processor on rerun of post under coreboot.
 - 402fd9c Enhance build to emit relocation information.
 - d1b4f96 Separate out init code from the rest of the 32bit flat code.
 - 1a4885e Modify tools/layoutrom.py to use classes instead of tuples.
 - 6c2e781 Use str.startswith() in python scripts.
 - d9c916e Prep version for next release.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

commit 82fa39b7

only contains half of the fix.  It forgots the save state fix for
UINT8 indexes.

Anthony, please apply, without this migration using hpet is broken.
(only current user).
Signed-off-by: NJuan Quintela <quintela@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

They are defined with the same semantics as the POSIX types,
so prefer those for consistency. Suggested by Peter Maydell.

Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: NAndreas Färber <andreas.faerber@web.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The original SoftFloat 2.0b library avoided the use of custom integer types
in its public headers. This requires the definitions of int{8,16,32,64} to
match the assumptions in the declarations. This breaks on BeOS R5 and Haiku/x86,
where int32 is defined in {be,os}/support/SupportDefs.h in terms of a long
rather than an int. Spotted by Michael Lotz.

Since QEMU already breaks this distinction by defining those types just above,
do use them for consistency and to allow #ifndef'ing them out as done for
[u]int16 on AIX.

Cc: Michael Lotz <mmlr@mlotz.ch>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndreas Färber <andreas.faerber@web.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The SoftFloat license requires "prominent notice that the work
is derivative". Having added features like improved 16-bit support
for arm already, add such a notice to the sources.

softfloat-native.[ch] are not under the SoftFloat license
and thus are not changed.

Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAndreas Färber <andreas.faerber@web.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The PCI/PCI-X Family of Gigabit Ethernet Controllers Software
Developer’s Manual states the following about the POPTS field:

  Provides a number of options which control the handling of this
  packet.  This field is ignored except on the first data descriptor of
  a packet.

The current implementation always loads the field and its checksum
offload flags.  This patch uses only the first descriptor's POPTS field
in order to comply with the specification.

When Solaris sends multi-descriptor packets it fills in POPTS for the
first descriptor only.  Therefore this patch is necessary in order to
perform checksum offload correctly for multi-descriptor packets.
Reported-by: NDaniel Pecka <dpecka@techniservit.cz>
Reported-by: NGabriele A. Trombetti <gabriele.trombetti@itb.cnr.it>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

* 'for-anthony' of git://github.com/bonzini/qemu:
  remove qemu_get_clock
  add a generic scaling mechanism for timers
  change all other clock references to use nanosecond resolution accessors
  change all rt_clock references to use millisecond resolution accessors
  add more helper functions with explicit milli/nanosecond resolution

* 'for-anthony' of git://repo.or.cz/qemu/kevin:
  Add qcow2 documentation
  hw/xen_disk: aio_inflight not released in handling ioreq when nr_segments==0
  Improve error handling in do_snapshot_blkdev()
  Fix ATA SMART and CHECK POWER MODE
  Don't allow multiwrites against a block device without underlying medium
  tools: Use real async.c instead of stubs
  Add error message for loading snapshot without VM state
  block/qcow: Don't ignore immediate read/write and other failures
  block/vdi: Don't ignore immediate read/write failures

rbd support tries to both link with -lrados and -lcrypto. While the
first one is of course necessary, the second is not necessary (only
librados ifself needs to link with libcrypto).

This fixes a licensing issue: qemu as a whole is GPL v2, and thus can't
be linked with OpenSSL without an exception in the license, which seems
difficult to get given the number of persons involved.

Cc: Christian Brunner <chb@muc.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Add support for the Versatile Express SYS_CFG registers, which provide
a generic means of reading or writing configuration information from
various parts of the board. We only implement shutdown and reset.

Also make the RESETCTL register RAZ/WI on Versatile Express rather
than reset the board. Other system registers are generally the same
as Versatile and Realview.

This includes a VMState version number bump for arm_sysctl,
since we have new register state to preserve. It also adds
sys_mci to the VMState while we're bumping the version number
(an accidental omission from commit b50ff6f5).
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>