Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Device code some times needs to access physical memory and does that
through the ld./st._phys functions. However, these are the exact same
functions that the CPU uses to access memory, which means they will
be endianness swapped depending on the target CPU.

However, devices don't know about the CPU's endianness, but instead
access memory directly using their own interface to the memory bus,
so they need some way to read data with their native endianness.

This patch adds _le and _be functions to ld./st._phys.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Just in case there's still a way how a guest can read out buffers when it's not
supposed to, let's zero the buffers during initialisation so that we don't leak
information to the guest.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>

This fixes https://bugs.launchpad.net/qemu/+bug/786209:

    When the DRQ_STAT bit is set, the IDE core permits both data reads
    and data writes, regardless of whether the current transfer was
    initiated as a read or write.

    This potentially leaks uninitialized host memory into the guest,
    if, before doing anything else to an IDE device, the guest begins a
    write transaction (e.g. WIN_WRITE), but then *reads* from the IO
    port instead of writing to it.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>

The current message doesn't clearly communicate the error cause.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

It needs to be a qdev property, because it belongs to the drive's
guest part.  Precedence: commit a0fef654 and 6ced55a5.

Bonus: info qtree now shows the serial number.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

On Linux x86_64 host with 32bit userspace, running
qemu or even just "qemu-img create -f qcow2 some.img 1G"
causes a kernel warning:

ioctl32(qemu-img:5296): Unknown cmd fd(3) cmd(00005326){t:'S';sz:0} arg(7fffffff) on some.img
ioctl32(qemu-img:5296): Unknown cmd fd(3) cmd(801c0204){t:02;sz:28} arg(fff77350) on some.img

ioctl 00005326 is CDROM_DRIVE_STATUS,
ioctl 801c0204 is FDGETPRM.

The warning appears because the Linux compat-ioctl handler for these
ioctls only applies to block devices, while qemu also uses the ioctls on
plain files.  Work around by calling fstat() the ensure the ioctls are
only used on block devices.
Signed-off-by: NJohannes Stezenbach <js@sig21.net>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

qemu-img currently writes disk images using writeback and filling
up the cache buffers which are then flushed by the kernel preventing
other processes from accessing the storage.
This is particularly bad in cluster environments where time-based
algorithms might be in place and accessing the storage within
certain timeouts is critical.
This patch adds the option to choose a cache method when writing
disk images.
Signed-off-by: NFederico Simoncelli <fsimonce@redhat.com>
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

People shouldn't explicitly specify host_device any more. raw is doing the
Right Thing.
Signed-off-by: NKevin Wolf <kwolf@redhat.com>

Until now, pxa2xx_lcd only supported 90deg rotation, but
some machines (for example Zipit Z2) needs 270deg rotation.
Signed-off-by: NVasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

Parameter 'info' is const, so add the missing attribute.

v2:
Add 'const' to the local variable info in do_cpu_reset() and to
the boot_info field in CPUARMState (suggested by Peter Maydell).

Cc: Andrzej Zaborowski <balrogg@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAndrzej Zaborowski <andrew.zaborowski@intel.com>

This bug showed up after 1455084e, and
may be seen only on operating systems *not* using DMA to give commands
to SCSI adapter.
Signed-off-by: NHervé Poussineau <hpoussin@reactos.org>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Use stack instead of temp_buf array in CPUState for TCG temps.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

udivx and sdvix don't modify condition flags, so they shall not
overwrite cpu_cc_*
Signed-off-by: NArtyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

* 'ppc-next' of git://repo.or.cz/qemu/agraf:
  PPC: move TLBs to their own arrays
  PPC: 440: Use 440 style MMU as default, so Qemu knows the MMU type
  PPC: E500: Use MAS registers instead of internal TLB representation
  PPC: Only set lower 32bits with mtmsr
  PPC: update openbios firmware
  PPC: mpc8544ds: Add hypervisor node
  PPC: calculate kernel,initrd,cmdline locations dynamically
  target-ppc: Handle memory-forced I/O controller access
  PPC: E500: Implement reboot controller

Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Use stack instead of temp_buf array in CPUState for TCG temps.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Use TCG_REG_CALL_STACK instead of TCG_REG_SP for consistency.
Acked-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

It's a valid branch pc + 2.
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

The only user (within tcg.c) was removed
Signed-off-by: Nmalc <av1474@comtv.ru>

The only user (within tcg.c) was removed
Signed-off-by: Nmalc <av1474@comtv.ru>

Commit f26e428d fixed compilation
with --enable-vnc-png, but broke it with --enable-vnc-png.

The breakage is caused by pngconfig.h which checks whether
setjmp.h was already included and fails because qemu-common.h
includes setjmp.h.

The check is disabled by defining PNG_SKIP_SETJMP_CHECK.

Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Reviewed-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

If I start qemu with:

  # qemu -hda disks/test.img -enable-kvm -m 1G -snapshot \
         -device virtio-serial \
         -chardev socket,host=localhost,port=1234,server,nowait,id=foo \
         -device virtserialport,chardev=foo,name=org.qemu.guest_agent

I get a segfault when booting a Fedora 14 guest. The backtrace says:

  Program terminated with signal 11, Segmentation fault.
    #0  0x0000000000420850 in handle_control_message (vser=0x3732bd0, buf=0x2c173e0, len=8) at /home/lcapitulino/src/qmp-unstable/hw/virtio-serial-bus.c:335
    335     info = DO_UPCAST(VirtIOSerialPortInfo, qdev, port->dev.info);

What's happening is VIRTIO_CONSOLE_DEVICE_READY is a message for the
whole device, not for an individual port. So port is NULL. This bug was
introduced by commit a15bb0d6.

This commit fixes that by making the port returned by find_port_by_id()
be used only by the VIRTIO_CONSOLE_PORT_READY and
VIRTIO_CONSOLE_PORT_OPEN messages.
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAmit Shah <amit.shah@redhat.com>

Fix conflicting types for 'INT32' in basetsd.h and jmorecfg.h by
including qemu-common.h first.
Signed-off-by: NRoy Tam <roytam@gmail.com>
Acked-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Use stack instead of temp_buf array in CPUState for TCG temps.

On Sparc64, stack pointer is not aligned but there is a fixed bias of 2047,
so don't try to enforce alignment.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Use stack instead of temp_buf array in CPUState for TCG
temps.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>