- 22 1月, 2013 5 次提交
-
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Paolo Bonzini 提交于
When a 0-sized disk is found, READ CAPACITY will return a LUN NOT READY error. However, because it returns -1 instead of zero, the HBA will call scsi_req_continue. This will typically cause a segmentation fault or an assertion failure. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Peter Lieven 提交于
This patch will send NOP-Out PDUs every 5 seconds to the iSCSI target. If a consecutive number of NOP-In replies fail a reconnect is initiated. iSCSI NOPs help to ensure that the connection to the target is still operational. This should not, but in reality may be the case even if the TCP connection is still alive if there are bugs in either the target or the initiator implementation. v2: - track the NOPs inside libiscsi so libiscsi can reset the counter in case it initiates a reconnect. Signed-off-by: NPeter Lieven <pl@kamp.de> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Peter Lieven 提交于
libiscsi expects all write16 data in a linear buffer. If the iovec only contains one buffer we can skip the linearization step as well as the additional malloc/free and pass the buffer directly. Reported-by: NRonnie Sahlberg <ronniesahlberg@gmail.com> Signed-off-by: NPeter Lieven <pl@kamp.de> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
由 Peter Lieven 提交于
This patch adds support for bdrv_create. This allows e.g. to use qemu-img to convert from any supported device to an iscsi backed storage as destination. Signed-off-by: NPeter Lieven <pl@kamp.de> Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
-
- 11 1月, 2013 18 次提交
-
-
由 Anthony Liguori 提交于
* stefanha/trivial-patches: hw/pc.c: Fix converting of ioport_register* to MemoryRegion Replace remaining gmtime, localtime by gmtime_r, localtime_r savevm: Remove MinGW specific code which is no longer needed qga/channel-posix.c: Explicitly include string.h configure: Fix comment (copy+paste bug) readline: avoid memcpy() of overlapping regions Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
* kraxel/q35.1: Makefile: install the "acpi-dsdt.aml" and "q35-acpi-dsdt.aml" blobs too pc: rename machine types q35: document chipset devices q35: add ich9 intel hda controller Conflicts: hw/intel-hda.c aliguori: resolve conflict with static const change from Andreas. Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
* afaerber-or/prep-up: prep: Use pc87312 device instead of collection of random ISA devices prep: Add pc87312 Super I/O emulation prep: Include devices for ppc64 as well Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Julien Grall 提交于
The commit 258711 introduced MemoryRegion to replace ioport_region* for ioport 80h and F0h. A MemoryRegion needs to have both read and write callback otherwise a segfault will occur when an access is made. The previous behaviour of this both ioport is to return 0xffffffffffffffff. So keep this behaviour. Reported-by: NAdam Lackorzynski <adam@os.inf.tu-dresden.de> Signed-off-by: NJulien Grall <julien.grall@citrix.com> Tested-by: NAdam Lackorzynski <adam@os.inf.tu-dresden.de> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Stefan Weil 提交于
This allows removing of MinGW specific code and improves reentrancy for POSIX hosts. [Removed unused ret variable in qemu_get_timedate() to fix warning: vl.c: In function ‘qemu_get_timedate’: vl.c:451:16: error: variable ‘ret’ set but not used [-Werror=unused-but-set-variable] -- Stefan Hajnoczi] Signed-off-by: NStefan Weil <sw@weilnetz.de> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Stefan Weil 提交于
QEMU provides a portable function qemu_gettimeofday instead of gettimeofday and also an implementation of localtime_r for MinGW. Signed-off-by: NStefan Weil <sw@weilnetz.de> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Peter Maydell 提交于
Explicitly include string.h to avoid warnings under MacOS X/clang about implicit declarations of strerror() and strlen(). Signed-off-by: NPeter Maydell <peter.maydell@linaro.org> Reviewed-by: NStefan Weil <sw@weilnetz.de> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Stefan Weil 提交于
Signed-off-by: NStefan Weil <sw@weilnetz.de> Signed-off-by: NStefan Hajnoczi <stefanha@redhat.com>
-
由 Laszlo Ersek 提交于
The WARNING message from commit f7e4dd6c made me notice. Signed-off-by: NLaszlo Ersek <lersek@redhat.com> Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Starting with release 1.4 we have a fully functional q35 machine type, i.e. "qemu -M q35" JustWorks[tm]. Update machine type names to reflect that: * pc-1.4 becomes pc-i440fx-1.4 * q35-next becomes pc-q35-1.4 The pc-1.3 (+older) names are maintained for compatibility reasons. For the same reason the "pc" and "q35" aliases are kept. pc-piix-1.4 continues to be the default machine type, again for compatibility reasons. Also updated the description (shown by "qemu -M ?") with host bridge name, south bridge name and chipset release year. Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Paolo Bonzini 提交于
When the device is reset, the SCSI bus should also be reset so that in-flight I/O is cancelled. Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Paolo Bonzini 提交于
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Andreas Färber 提交于
Since 39bffca2 (qdev: register all types natively through QEMU Object Model), TypeInfo as used in the common, non-iterative pattern is no longer amended with information and should therefore be const. Fix the documented QOM examples: sed -i 's/static TypeInfo/static const TypeInfo/g' include/qom/object.h Since frequently the wrong examples are being copied by contributors of new devices, fix all types in the tree: sed -i 's/^static TypeInfo/static const TypeInfo/g' */*.c sed -i 's/^static TypeInfo/static const TypeInfo/g' */*/*.c This also avoids to piggy-back these changes onto real functional changes or other refactorings. Signed-off-by: NAndreas Färber <afaerber@suse.de> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
git://git.qemu.org/qemu由 Andreas Färber 提交于
Conflicts: hw/Makefile.objs hw/ppc_prep.c Signed-off-by: NAndreas Färber <andreas.faerber@web.de>
-
由 Anthony Liguori 提交于
* kraxel/build.1: m48t59-test: don't touch watchdog rtc-test: skip year-2038 overflow check in case time_t is 32bit only Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Anthony Liguori 提交于
vfio-pci: Fixes for qemu 1.4 & stable * awilliam/tags/qemu-1.4-vfio-20130109.0: vfio-pci: Loosen sanity checks to allow future features vfio-pci: Make host MSI-X enable track guest Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 10 1月, 2013 3 次提交
-
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Gerd Hoffmann 提交于
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
-
由 Fabien Chouteau 提交于
The current implementation of os_host_main_loop_wait() on Windows, returns 1 only when a g_poll() event occurs because the return value of select() is overridden. This is wrong as we may skip a socket event, as shown in this example: 1. select() returns 0 2. g_poll() returns 1 (socket event occurs) 3. os_host_main_loop_wait() returns 1 4. qemu_iohandler_poll() sees no socket event because select() has return before the event occurs 5. select() returns 1 6. g_poll() returns 0 (g_poll overrides select's return value) 7. os_host_main_loop_wait() returns 0 8. qemu_iohandler_poll() doesn't check for socket events because the return value of os_host_main_loop_wait() is zero. 9. goto 5 This patch use one variable for each of these return values, so we don't miss a select() event anymore. Also move the call to select() after g_poll(), this will improve latency as we don't have to go through two os_host_main_loop_wait() calls to detect a socket event. Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NFabien Chouteau <chouteau@adacore.com> Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
- 09 1月, 2013 14 次提交
-
-
由 Anthony Liguori 提交于
* mdroth/qga-pull-1-8-2013: qemu-ga: sample fsfreeze hooks qemu-ga: execute hook to quiesce the guest on fsfreeze-freeze/thaw qemu-ga: guest_suspend(): improve error reporting qemu-ga: bios_supports_mode(): improve error reporting qemu-ga: qmp_guest_network_get_interfaces(): get rid of snprintf() + error_set() qemu-ga: qmp_guest_fstrim(): get rid of sprintf() + error_set() qemu-ga: qmp_guest_fsfreeze_*(): get rid of sprintf() + error_set() qemu-ga: build_fs_mount_list(): take an Error argument qemu-ga: qmp_guest_shutdown(): improve error reporting qemu-ga: qmp_guest_file_*: improve error reporting qemu-ga: qmp_guest_file_close(): fix fclose() error check qemu-ga: guest_file_handle_find(): take an Error argument Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-
由 Tomoki Sekiyama 提交于
Adds sample hook scripts for --fsfreeze-hook option of qemu-ga. - fsfreeze-hook : execute scripts in fsfreeze-hook.d/ - fsfreeze-hook.d/mysql-flush.sh.sample : quiesce MySQL before snapshot Signed-off-by: NTomoki Sekiyama <tomoki.sekiyama.qu@hitachi.com> Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
-
由 Tomoki Sekiyama 提交于
To use the online disk snapshot for online-backup, application-level consistency of the snapshot image is required. However, currently the guest agent can provide only filesystem-level consistency, and the snapshot may contain dirty data, for example, incomplete transactions. This patch provides the opportunity to quiesce applications before snapshot is taken. If --fsfreeze-hook option is specified, the hook is executed with "freeze" argument before the filesystem is frozen by fsfreeze-freeze command. As for fsfreeze-thaw command, the hook is executed with "thaw" argument after the filesystem is thawed. This patch depends on patchset to improve error reporting by Luiz Capitulino: http://lists.gnu.org/archive/html/qemu-devel/2012-11/msg03016.htmlSigned-off-by: NTomoki Sekiyama <tomoki.sekiyama.qu@hitachi.com> Reviewed-by: NLuiz Capitulino <lcapitulino@redhat.com> *clarified usage in help output Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
-
由 Luiz Capitulino 提交于
Most errors are QERR_UNDEFINED_ERROR today. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
-
由 Luiz Capitulino 提交于
Most errors are QERR_UNDEFINED_ERROR today. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
-
由 Luiz Capitulino 提交于
Convert them to error_setg_errno(). Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
-
由 Luiz Capitulino 提交于
Convert them to error_setg_errno(). Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
-
由 Luiz Capitulino 提交于
Convert them to error_setg_errno(). Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
-
由 Luiz Capitulino 提交于
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
-
由 Luiz Capitulino 提交于
Most errors are QERR_UNDEFINED_ERROR. Also, adds ga_wait_child() as a future commit will use it too. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
-
由 Luiz Capitulino 提交于
Use error_setg_errno() when possible with an improved error description. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
-
由 Luiz Capitulino 提交于
fclose() returns EOF on error. Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
-
由 Luiz Capitulino 提交于
Signed-off-by: NLuiz Capitulino <lcapitulino@redhat.com> Reviewed-by: NMichael Roth <mdroth@linux.vnet.ibm.com> *Fixed missing space character in error message Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
-
由 Anthony Liguori 提交于
* afaerber/qom-cpu: target-i386: Explicitly set vendor for each built-in cpudef target-i386: Sanitize AMD's ext2_features at realize time target-i386: Filter out unsupported features at realize time qemu-common.h: Make qemu_init_vcpu() stub static inline target-i386: check/enforce: Eliminate check_feat field target-i386: check/enforce: Check SVM flag support as well target-i386: check/enforce: Check all CPUID.80000001H.EDX bits target-i386: check/enforce: Do not ignore "hypervisor" flag target-i386: check/enforce: Fix CPUID leaf numbers on error messages target-i386: kvm: Enable all supported KVM features for -cpu host target-i386: kvm: -cpu host: Use GET_SUPPORTED_CPUID for SVM features cpu: Change parent type to Device qdev: Don't assume existence of parent bus on unparenting qdev: Include qdev code into *-user, too libqemustub: sysbus_get_default() stub libqemustub: vmstate register/unregister stubs libqemustub: Add qemu_[un]register_reset() stubs Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
-