The variable 'status' does not exist anymore, adjust DPRINTF
accordingly.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

The REG_PC constant used in opcode-cris.h can clash with a
similar define in system include files. In particular the
Ubuntu Lucid SPARC signal.h will define REG_PC, and since
qemu-common.h now includes signal.h this was causing compile
failures. Rename the constants to avoid this issue.
(NB that REG_SP is not actually used within QEMU.)
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Other scsi_target_reqops commands were careful about not using r->cmd.xfer
directly, and instead always cap it to a fixed length.  This was not done
for REQUEST SENSE, and this patch fixes it.
Reported-by: NBlue Swirl <blauwirbel@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Don't use req before it has been initialised in scsi_req_new().
This fixes a compile failure due to gcc complaining about this.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Fixes a build issue on RHEL5, and potentially other distros, where gcc
will generate an error due to us not writing a trailing "\n" when
generating *qmp-commands.h
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Noted by Drew Jones.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

ROM/device regions act as mapped RAM for reads, can I/O memory for
writes.  This allow emulation of flash devices.
Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NAvi Kivity <avi@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This patch fixes build when any of the include paths from QEMU_CFLAGS
contains a header file with similar name to a header file in qemu
sources. I hit it with error.h included by qapi/qapi-types-core.h. GCC
decided to use /usr/include/alsa/error.h instead of qemu's error.h.
Tested-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: NJiri Denemark <jdenemar@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

guest_agent is not supported for mingw32, so the default value
should be 'no', not 'yes'.

This removes the dependencies to glib-2.0 and python which
makes native and cross builds for w32 much easier (no need
to get and install these extra packages).

It also avoids the problems caused by different bitfield alignment
which is required by glib-2.0.

It is still possible to set guest_agent=yes via configure option.
Signed-off-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Can be useful when debugging the device scan phase.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Unit attention conditions override any sense data the device already
has.  Their signaling and clearing is handled entirely by the SCSIBus
code, and they are completely transparent to the SCSIDevices.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Also introduce the first occurrence of "independent" SCSIReqOps,
to handle invalid commands in common code.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This will let SCSIBus detect requests sent to an invalid LUN, and
handle them itself.  However, there will be still support for only one
LUN per target
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This struct is currently unnamed.  Give it a name and use it
explicitly to decouple (some parts of) CDB parsing from
SCSIRequest.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Right now the CDB is not passed to the SCSIBus until scsi_req_enqueue.
Passing it to scsi_req_new will let scsi_req_new dispatch common requests
through different reqops.

Moving the memcpy to scsi_req_new is a hack that will go away as
soon as scsi_req_new will also take care of the parsing.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This will let allow requests to be dispatched through different callbacks,
either common or per-device.

This patch adjusts the API, the next one will move members to SCSIReqOps.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

With this patch, sense data is stored in the generic data structures
for SCSI devices and requests.  The SCSI layer takes care of storing
sense data in the SCSIDevice for the subsequent REQUEST SENSE command.

At the same time, get_sense is removed and scsi_req_get_sense can use
an entirely generic implementation.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

A small improvement in the SCSI request API.  Pass the status
at the time the request is completed, so that we can assert that
no request is completed twice.  This would have detected the
problem fixed in the previous patch.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

vscsi supports autosensing by providing sense data directly in the
response.  When get_sense was added, the older state machine approach
that sent REQUEST SENSE commands separately was left in place.  Remove
it, all existing SCSIDevices do support autosensing and the next patches
will make the support come for free from the SCSIBus.
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

In fact, if the HBA's transfer_data callback goes on with scsi_req_continue
the request will be completed successfully instead of showing a failure.
It can even cause a segmentation fault.

An easy way to trigger it is "eject -f cd" during installation (during media
test if the installer does something like that).
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

We've always listened on port 501 for vgabios panic messages.  In the entire
time I've worked on QEMU, I've never actually seen a vgabios panic message :-)

If we change the semantics of this port a little bit, it makes it possible to
use it for more interesting use-cases.  I chose this approach instead of adding
a new I/O port because it avoids having a guest visible change.

This change allows single-byte access to port 501 and also uses the value
written to construct an exit code.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Spotted while reviewing the migration thread patches.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

If an attempt to create a qdev device on the default sysbus (by passing
NULL as the bus to qdev_create) fails, print a useful error message
rather than crashing trying to dereference a NULL pointer.
Signed-off-by: NPeter Maydell <peter.maydell@linaro.org>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Reviewed-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NStefan Hajnoczi <stefanha@linux.vnet.ibm.com>

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Signed-off-by: NEdgar E. Iglesias <edgar.iglesias@gmail.com>

Signed-off-by: NAlon Levy <alevy@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

commit 8e301472e324b6d6496d8b4ffc66863e99d7a505

user visible changes in seabios:
  * ahci is enabled by default (and thus in this build).
  * bootorder support for ahci.
  * two-pass pci allocator (orders bars by size for better packing).
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>

Break is only noticable with newer spice-server library (0.8.2 release
or 0.9.0 and newer on master branch).

ioport_write's val was changed from uint32_t to uint64_t, this
broke two printfs. Use PRId64 instead of %d.
Signed-off-by: NAlon Levy <alevy@redhat.com>
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>