Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Commit a0f291fc has enabled
-fstack-protector-all on all targets, as the configure test is bogus.
GCC only emits a warning and not an error if this option is not
supported, so the configure scripts doesn't detect the problem.

This patch changes the configure script to try the various flags
with -Werror in addition to catch the possible warnings.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Remove Thiemo from the maintainers. Requiescat in pace.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

In helper.c AREG0 may not correspond do env, so it's not possible to
call cpu_loop_exit() here. Call it from op_helper.c instead.
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Access the cp15.c13 TLS registers directly with TCG ops instead of with
a slow helper. If the the cp15 read/write was not TLS register access,
fall back to the cp15 helper.

This makes accessing __thread variables in linux-user when apps are compiled
with -mtp=cp15 possible. legal cp15 register to acces from linux-user are
already checked in cp15_user_ok.

While at it, make the cp15.c13 Thread ID registers available only on
ARMv6K and newer.
Signed-off-by: NRiku Voipio <riku.voipio@nokia.com>

Qemu may hang in host_signal_handler after qemu has done a
seppuku with cpu_abort(). But at this stage we are not really
interested in target process coredump anymore, so unregister
host_signal_handler to die grafefully.
Signed-off-by: NRiku Voipio <riku.voipio@nokia.com>

Signed-off-by: NRiku Voipio <riku.voipio@nokia.com>

This patch for linux-user adapts the output of the emulated uname()
syscall to match the configured CPU.  Tested with x86, x86-64 and arm
emulation.
Signed-off-by: NRiku Voipio <riku.voipio@iki.fi>
Signed-off-by: NLoïc Minier <lool@dooz.org>

The recent transition to always have the DCR helper functions take 32 bit
values broke the PPC64 target, as target_long became 64 bits there.

This patch changes DCR helpers to target_long arguments, and cast the values
to 32 bit when needed.

Fixes PPC64 build with --enable-debug-tcg

Based on a patch from Alexander Graf <agraf@suse.de>
Reported-by: NStefan Weil <weil@mail.berlios.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

It is very handy to have a reliable mapping of a condition to its inverse.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Defines setcond_{i32,i64} and setcond2_i32 for 64-on-32-bit.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The internal opcodes brcond2, add2, sub2, mulu2 were undocumented.
Place these in a new section that clearly indicates that they are
not to be emitted by translators.
Signed-off-by: NRichard Henderson <rth@twiddle.net>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

The WLAN USB stick ZyXEL NWD271N (0586:3417) uses very large
usb control transfers of more than 2048 bytes which won't fit
into the buffer of the ctrl_struct. This results in an error message
"husb: ctrl buffer too small" and a non-working device.
Increasing the buffer size to 8192 seems to be a safe choice.
Signed-off-by: NChristian Krause <chkr@plauener.de>
Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NAurelien Jarno <aurelien@aurel32.net>

Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

When several PCI bridges were in use, monitor command "info pci" would
enter into infinite loop. Buses behind the bridge were not discoverable
because secondary and subordinate bus numbers were not used properly.
Other buses were not found because bus search terminated on first miss.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

It's currently not used by PPC machines. Refactor so that also Sparc64
machines can use it.
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

to= is handled in qemu-sockets.c inet_listen.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This one is for 0.12 too.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NBlue Swirl <blauwirbel@gmail.com>

This provides the same information as reverted commit 2ba6edf0.  Not
much, just better than nothing.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

While there, use "property" rather than "option", for consistency with
-global.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Option "-device DRIVER,?" and monitor command "device_add DRIVER,?"
print the supported properties instead of creating a device.  The
former also terminates the program.

This is commit 2ba6edf0 (just reverted) done right.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This reverts commit 2ba6edf0.

The commit has two issues:

* When it runs from the monitor, e.g. "device_add e1000,?", it prints
  to stderr instead of the monitor.

* Help looks to callers just like failed device creation.  This makes
  main() exit unsuccessfully on "-device e1000,?".

We need to do this differently.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This reverts commit 922910ce.

The commit has four issues:

* When it runs from the monitor, e.g. "device_add e1000,mac=?", it
  prints to stderr instead of the monitor.

* Help looks to callers just like failed device creation.  This makes
  main() exit unsuccessfully on "-device e1000,mac=?".

* It has an undocumented side effect on -global: "-global e1000.mac=?"
  prints help, but only when we actually add an e1000 device.

* It does not work for properties that accept the value "?".

We need to do this differently.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Help was shoehorned into device creation, qdev_device_add().  Since
help doesn't create a device, it returns NULL, which looks to callers
just like failed device creation.  Monitor handler do_device_add()
doesn't care, but main() exits unsuccessfully.

Move help out of device creation, into new qdev_device_help().
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Return the bitwise inclusive or of all return values instead of the
last call's value.  This lets you find out whether any of the calls
returned a non-zero value.

No functional change, as existing users either don't care for the
value, or pass non-zero abort_on_failure, which breaks the loop on the
first non-zero return value.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This reverts commit 64a34bb1.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This changes the error message from "Invalid CPU index" to "Invalid
parameter index" in the human monitor.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Before, it used type 's', which strips quotes and interprets escapes,
and is quite inappropriate for QMP.

Negative arguments are no flushed to zero.  Before, they were cast to
uint32_t, which wrecked the sign.

Ridiculously large arguments including infinities are now rejected.
Before, they were interpreted as zero.  Same for NaN.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This is a double value with optional suffixes ms, us, ns.  We'll need
this to get migrate_set_downtime() QMP-ready.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Before, it used type 's', which strips quotes and interprets escapes,
and is quite inappropriate for QMP.

Negative arguments are no flushed to zero.  Before, they were cast to
uint32_t, which wrecked the sign.

Ridiculously large arguments including infinities are now rejected.
Before, they were interpreted as zero.  Same for NaN.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

This is a double value with optional suffixes G, g, M, m, K, k.  We'll
need this to get migrate_set_speed() QMP-ready.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Helper function just like qdict_get_int(), just for QFloat/double.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>

Was forgotten in commit b6e098d7.
Signed-off-by: NMarkus Armbruster <armbru@redhat.com>
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>